vB Easy Archive - Removing w810 front plate

Pages: 1

Removing w810 front plate
(Click here to view the original thread with full colors/images)

Posted by: fonenoob

Do I just pry it off with something thin? I'm scared I'm going to break it. Is there anything I should watch out for?

Posted by: glorfingal

yup - just pry. the locating clips are best pushed in (they're on the face plate, not
the housing). watch out for the dust seal. It's fixed quite securely to the front face
but also has some "tackiness" to bond it to the lcd as well .....

Posted by: mayu000

okay ... lissin

OPEN YOUR MEMORY CARD SLOT
take out the memory card..... put your finger in there be careful (not too far either)
and pull that part of the face up and the bottom 2 clips thats holding the face onto the housing should clip off .... and from there carefully work your way up .. use a card possibly or carefully pull each side of the face where you think is cliipd and from there you shouldnt have a prblm

REMEMBER ALWAYS WORK FROM BOTTOM TO TOP ...after you flick that memory card clip the entire bottom piece will snap off and from there it is pretty easy but DO NOT apply tooo much pressure you might break the clips...