http://www.megaupload.com/?d=Z37REAKN
http://rapidshare.com/files/11162717/fc-flashfile-v2_011007.rar
|
Originally Posted by fungied.cheese
On another note, this might be of interest to MANY people. When it's been around an hour or so and your phone still hasn't gotten passed the bruteforcing stage waiting can be very annoying. What I've found is that if you turn off PhoneXS, unplug USB, take out battery for 20 seconds, and try flashing again it has a better chance of bruteforcing and is usually successful within 15 minutes. I dunno if it's just me, but this seems to be the case in ALL of my attempts, so if anyone else would give it a try to see how it works for them and report their success/failures and how many times they had to try this procedure (yea, sometimes you gotta do it more than once)
|
|
Originally Posted by tawong
I know many people here want to make another thread tutorial for PhoneXS and there are many already but failed to mentioned that this link http://forums.se-nse.net/index.php?showtopic=6170 does not have custom pak for America 2. You said you have to use America_2 FW to use and there's no such custom pak, hence more confusion. And topsony do have that custom pak but it's not complete. If you open up the .xml file it only has a few lines.
|
<info> <pcr-registered>2006-02-06T04:18:00</pcr-registered> <pcr-created>2006-02-17T13:39:11</pcr-created> <created-by>13001004</created-by> <customization-pm>Helena Bolin</customization-pm> <pcr-id>36564</pcr-id> <pcr-revision>RA3</pcr-revision> <cda-number>CDA102430/105</cda-number> <cda-revision>R2A</cda-revision> <model>W810i</model> <country>Brazil</country> <operator>Generic</operator> <language-variant-name>AMERICA_2</language-variant-name> <allowed-language>ae</allowed-language> <allowed-language>pb</allowed-language> <allowed-language>xl</allowed-language> </info>
|
Originally Posted by fungied.cheese
if you keep reading below though, you'll see there is a way to trick the Europoe_2 custpack into thinking that it's an America_2 custpack..i did it and it works without flaw for me. Essentially you need to replace the already existing section with <info> </info> with this:
Code:
then just make sure you upload your own custpack when flashing (under model select "custom") and place ALL custpack files into the custom_pack folder |
|
W810i EUROPE GENERIC Attached File W810i_CDA102494_2_EUROPE_2.zip ( 9.58k ) Number of downloads: 325 Attached File W810i_CDA102494_15_EUROPE_2.zip ( 9.09k ) Number of downloads: 167 Attached File W810i_CDA102494_4_EUROPE_2.zip ( 9.31k ) Number of downloads: 143 Attached File W810i_CDA102494_33_EUROPE_2.zip ( 267.03k ) Number of downloads: 184 Attached File W810i_CDA102494_43_EUROPE_3.zip ( 18.26k ) Number of downloads: 119 Attached File W810i_CDA102494_63_EUROPE_4.zip ( 495.86k ) Number of downloads: 185 Attached File W810i_CDA102494_85_EUROPE_5.zip ( 739.23k ) Number of downloads: 330 |
|
Originally Posted by tawong
Ok thanks. Let me try that...but in the above code it says "Brazil" as country. Are you in Brazil and you just want to use America firmware? I don't know why no one made a custom pak for America (it's a big country you know with lots of people).
|
|
Originally Posted by fungied.cheese
On another note, this might be of interest to MANY people. When it's been around an hour or so and your phone still hasn't gotten passed the bruteforcing stage waiting can be very annoying. What I've found is that if you turn off PhoneXS, unplug USB, take out battery for 20 seconds, and try flashing again it has a better chance of bruteforcing and is usually successful within 15 minutes. I dunno if it's just me, but this seems to be the case in ALL of my attempts, so if anyone else would give it a try to see how it works for them and report their success/failures and how many times they had to try this procedure (yea, sometimes you gotta do it more than once)
|
vBulletin Copyright ©2000 - 2008,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2008
- Created by Stefan "Xenon" Kaeser