vB Easy Archive - Motorola V635 CRASH. NEED HELP!

Pages: 1

Motorola V635 CRASH. NEED HELP!
(Click here to view the original thread with full colors/images)

Posted by: ctdig

Hi, i have a motorola v635, and since i get it it crashes sometimes after i open it, the screen gets white and restart (like turnin on). i don't know if it's a memory problem or something else. someone have any idea? Thank you!!

Posted by: jet2006

If you know how to flash, then best to do that, have a look at for more info http://motorolav635modding.blogspot.com/

Posted by: ctdig

Quote:

Originally Posted by jet2006

If you know how to flash, then best to do that, have a look at for more info http://motorolav635modding.blogspot.com/

thanks for the answer!
How can i change the firmware/flex, and wich version?
the actual are:
flex: se5142axxb110d, r474_G_08.48.88r

Posted by: jet2006

Read up on this first http://howardforums.com/showthread.php?t=1049769
Read and try & understand Flashing phone, get all modding software & get all monsterpacks for v635 and using usb cable, after installing all relevant programs you can then finally procede to flashing firmware.

Research & study first, then jump at the deep end!

Posted by: Jersian

I have a V600 and V505 that do the same thing. At times I will be in the middle of a call and it the reset will happen. I flashed the V600 with TRIPLETS_G_0B.09.72R_LP0032_JPJAVA_G_0B_TRIPLET_04 _05R_SE6424AXXT11D4_1FF and the problem repeated. Any other suggestions?

I did have one thought and I'm waiting to see if I was right. I had done some work on both phones and tightened the screws tighter than they were when the phones were new. I was wondering if I may have tightened them too tight, causing additional pressure on the wires inside. I loosened them a little today and am waiting to see if the problem goes away. I'm not sure this is the problem, but it's worth a try.