vB Easy Archive - Caller ID blocking

Pages: 1

Caller ID blocking
(Click here to view the original thread with full colors/images)

Posted by: DraGoNsLaYeR786

Is there a way to block caller id information from being sent to the next person I am calling but only for the next call? I haven't been able to find this feature in Windows Mobile 5 for Smartphones, and I have seen it almost every regular phone I have used.

Posted by: neutral

*67 before the number?

Posted by: john1027

Try #31# before your number. It has worked for most cell phones I've had on Cingular anyway. Just tried it and it worked on with a 3125.

Posted by: DraGoNsLaYeR786

Thank you for the responses. So, I guess there is no option in the GUI to perform this function?

Posted by: john1027

Not sure about what you are asking but #31# before the number you are dialing will read out on the callers end as a private number or id blocked. Next time you dial out and do not put in the #31# your number will read out on the other end and will not be blocked. If you are asking if you can chose that from a drop down menu instead of doing it manually, I would answer no.

Posted by: pdazealot

Use *31# then press Send. If it says successful, then you have changed your line to blocked. To unblock, just type #31# then press Send. Works on all Windows Mobile phones. You can put it in phone numbers in your contacts as well. It will work through soft resets as well.

Posted by: john1027

Thanks - only knew the one time #31# method.

Posted by: Bobby2x

works for t-mobile

Posted by: bouyark

Both *67 and #31# before dialing the number will block your telephone number showing on the receiver's telephone. I use this on my T mobile Dash.