vB Easy Archive - RIM 8300 Feature Question

Pages: 1

RIM 8300 Feature Question
(Click here to view the original thread with full colors/images)

Posted by: jaydickens

For those of you that have a curve, I noticed that when I have my bluetooth feature enabled on the phone the blue flashing indicator blinks even when the phone has been turned off. Has any of you experienced this with your unit? If so what is the reason for it to flash blue when the unit has been turned off? I assume that it is still connected to something.

Posted by: naviwilliams

Are you sure the device is OFF, and not just in standby mode?

Posted by: Moderator HF 7

If the Curve is turned off you should not see the indicator light flash. As navilyn previously posted are you sure the device is off and not in standby? If it's in standby it's normal for the indicator to blink.

Posted by: jaydickens

Well I am pretty sure that I have truned off the unit. I press and hold the red end call button until the message appears on the screen "Turning Off Handheld" When I turn off the unit while connected to a bluetooth headset, the unit's indicator lightwill flash while off. This must a quirk somewhere in the units system but everything else on the phone works as stated.

Posted by: ToddziLLa

Wirelessly posted (BlackBerry8300/4.2.2 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/102)

Interesting...

And...test post from my Curve!

Posted by: Moderator HF 7

Quote:

Originally Posted by jaydickens

Well I am pretty sure that I have truned off the unit. I press and hold the red end call button until the message appears on the screen "Turning Off Handheld" When I turn off the unit while connected to a bluetooth headset, the unit's indicator lightwill flash while off. This must a quirk somewhere in the units system but everything else on the phone works as stated.

I just tried that with mine and the indicator light does not blink when the handheld is turned off.

Posted by: Cavi Mike

if you hit the button on your bluetooth does the phone turn back on?