vB Easy Archive - Connecting to T-Zones via DUN over Bluetooth using Moto Z3

Pages: 1

Connecting to T-Zones via DUN over Bluetooth using Moto Z3
(Click here to view the original thread with full colors/images)

Posted by: HMHackMaster

I have a locked T-Mobile Rizr Z3 that I would like to use with T-Zones and DUN to get slow internet on the go. My Windows Vista laptop has bluetooth (manually upgraded BT stack to enable extra BT features, currently using 'WIDCOMM Bluetooth Software 5.1.0.1100"). I would perfer to use bluetooth, but a USB connection is acceptable. USB is all set up and configured. P2K and AT modes all work fine.

I have followed many instructions to configure my computer to use DUN to connect to the internet. I have been made aware of the possibility that T-Mobile may block some ports, but I suspect that this may not be true.
I have tried to configure the advanced "Extra Initialization Commands" that must be entered, and i have 4 different numbers to dial. This are listed below

Code:

Init commands:
+cgdcont=1,"IP","wap.voicestream.com","",0,0
---OR---
AT+CGDCONT=1,”IP”,”wap.voicestream.com"

DUN Numbers:
*99***1#
*99***2#
*99***3#
*99#

i have tried all of these combinations over both bluetooth and USB. All attempts result in an Windows Vista error, stated below:
"Dialing *99#..

Error 692: There was a hardware failure in the modem (or other connecting device)."

The phone activates when I attempt the connection, and there is bluetooth traffic between the two devices.

[EDIT]: Windows Vista offers to log what happened. I did this, but ended up with a couple-hundred page long HTML file that was of no help. I am willing to zip it up and post it if anyone wants some light bathroom reading.

I am at a loss of what do do. Please

.
Thanks in advance!