Google
 
Web www.howardforums.com
Pages: 1

P2K Commander 4.9D and V3xx

(Click here to view the original thread with full colors/images)


Posted by: jettaguy87

Are there any settings to change to allow an AT&T V3xx to connect to P2K Commander 4.9D? I downloaded the correct drivers from MOTODEV and it seems to be reading the phone in Windows XP fine but P2K keeps trying to look at Port 17 and I have a feeling that this may not be the correct port. Any help would be really appreciated, I purchased the phone on eBay and had to delete about 120 phonebook entries so I did a master clear. I also lost some themes and I am sick of looking at the AT&T one so I'd like to load up some new ones.

Mike



Posted by: jettaguy87

It keeps saying "at+Mode=8 -->COM 17". I have the phone is USB: Commmunication Mode is that correct?

Mike



Posted by: CaptShadow

Quote:
Originally Posted by jettaguy87
It keeps saying "at+Mode=8 -->COM 17". I have the phone is USB: Commmunication Mode is that correct?

Mike

I've never seen this setting for USB. On my AT&T V3xx to use P2K you need to go to Menu > settings > connection > USB settings > data connection. Do this before you connect your cable and start P2K.

I haven't had any problems with P2K Commander 4.9D. I already had MPT and the latest moto drivers installed. I just set the phone to data connection, connected the USB cable, and installed P2K. Once it installed, it connected to my phone and I was able to back up my seems and do all the edits I wanted to do.



Posted by: s5vi

In fact you dont need to set your phone into data/fax mode
P2kc 49D can switch to p2kmode from memcard mode also!



Posted by: CaptShadow

I don't know if the OP ever figured this out, but now I'm having a similar problem. P2K Commander 4.9D works fine with my Platinum version AT&T V3xx, but it's not connecting properly with my Red AT&T V3xx.
In the log it just keeps repeating at+mode=8 [] []---->Com10 and never loads the phone's directory.

I have the latest drivers installed and as I said, I have no problems connecting with the Platinum version. Any ideas what's causing this s5vi?

Specs:
Platinum AT&T V3xx
R26111LD-AS_U_96.B0.0AR
USIZRGBLATTUSAR26111019

Red AT&T V3xx
R26111MLD-AS_U_96.B0.0AR
USIZRGBLATTUSAR26111019



Posted by: s5vi

Yes i see that issue
I put my phone into memcard mode and p2kc works...
also try to reinstall p2k drivers and p2kc works...
also try to remove unnecesary COM ports from device manager (So COM port will be lower than 10) and p2kc works.....
good luck



Posted by: CaptShadow

Thanks for the reply s5vi. I should be able to try this out tonight. I'll let you know if this resolves this issue.



Posted by: CaptShadow

Thanks for the tip s5vi. Putting the phone in memory card mode worked like a charm. I was able to successfully do several seem edits and change the attributes on my EMS smileys.

One little bug though. When restarting the Red V3xx after a seem edit I lost my wallpaper. I just had a white background. I reapplied the wallpaper and all is well now. I never have this bug with the Platinum version though.



Posted by: jedovaty

Yeah, I had to put mine into memory card mode, this thread came timed perfectly, too.. mine kept showing "com20" -- although, I also had to reboot the confuser after installing the usb drivers.

All works, except the email's sent time is all wonky. Looking into it.. maybe the v3xx client is not perfect with handling its headers?





vBulletin Copyright ©2000 - 2008, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2008 - Created by Stefan "Xenon" Kaeser