vB Easy Archive - Motorola Q wap problems (w/Cricket)

Pages: 1

Motorola Q wap problems (w/Cricket)
(Click here to view the original thread with full colors/images)

Posted by: fire3element

Hi out there. I am having alot of problems getting the WAP to work on my MotoQ.

DONT TELL ME TO SEARCH!!! I have been looking for answers for the last 6-7 months and can not find anything that helps.

I have followed the tekcirC guide and a few others and I always run into issuse when attempting to access WAP on my phone.

I have RSD General 5.1, RSD Lite 3.2, RadioComm v11.1, and QPST.
I also have Active Sync 4.2 installed on a Windows XP SP2 computer with framework 2.0 and Internet explorer 6 installed. (Yeah I read about the IE7 issue so I uninstalled that and am using IE6)

I also installed the MOL2 update on the Q before I started all of this.
Dont know if that matters or not.

On RSD general I tried to load the PRL on my phone, but I just keeps freezing when I click on the PRL word in blue on the left to access the settings. I finally found the 1040 PRL for Cricket in the .hs format and used RSD Lite to install it.
So my MotoQ has Voice and Text on Cricket right now.

Now, I am trying to get the WAP and MMS to work. I followed the tekcirC guide and I get to the part where I use RSD Gereral to change the Mobile IP to Simple IP only. I can read my phone info into RSD, but then when I enter the Mobile IP field something happens.
I change the MIP Behavior to Simple IP and then click Write Phone. After I click on the Write Phone button, RSD says "Failed to read MIP from data". RSD reboots the phone and I try againg with no luck.

I found another tutorial that explains how to use RadioComm v11.1 to disable the MIP. I followed that guide untill I get to the part in the NV/Seem Edit tool where you have to edit the seems: 459, 463, 464, 714.
First off, I dont understand what I am supposed to open in the NV/Seem Edit tool to modify those seems. What item do I select in that top box to the right upper corner? I also tried to click the Read button. When I click on Read, it says something about cannot access the phone, "Recycle the phone power".

Am I missing something here? When I use RadioComm, I have the MotoQ Modem drivers installed and I am connected in the Modem Link on the Q.
Yes I selected the TCPIP-over-USB connection in RadioComm.

When I first installed RadioComm, in that splash screen that you have to select the MA Version and stuff, I chose the TCPIP and CDMA 6500. Was that right? There is also a little red "USB" icon on the System Tray while RadioComm is running. When I put my mouse over it, it says "Device not Connected/Detected (0)" or something to that effect.

As far as using QPST, it wont work on my computer at all, so it is kinda pointless to try to get me to use that.

Is there a way for my to get RSD General to work with this phone? Oh and also, if I read the phone into RSD and try to click on the PRL word in blue, then RSD just goes haywire and I end up using the Windows Task Manager to kill the program. I left it setting for a while to see if RSD would clear up, but RSD just keeps flashing (the whole program screen like it is trying to refresh or something).

I have searched for numerous hours and can not find any answers. And when I try to search here in Howard Forums, i just get a "Fatal Error" message and thats it.

I just tried to use the Master Reset on the Q cause I heard that that might clear up the connection issue, but RSD still acts the same.

Oh, and to give you an idea of what the phone is doing. I went ahead and finished the tekcirC guide and used that Rapiconfig program to load the settings on the phone. It works, but on the phone when I try to access the Internet, it ask for the User Name, Password and Domain.

I put in:
UserName- My#@mycricket.com
Password- cricket
Domain- (blank)

When I hit OK the Q says "incorrect username or password"
Same with the MMS messaging.

Should not it still work even though both MIP and SIP are active?
Or does the MIP have to be disabled?
In RSD on the MIP Behavior, it shows "BOTH".
Does it have to be Simple IP Only in order to work?

I am already paying for the WAP on my plan so any help would be appreciated.

Posted by: fire3element

Please someone help me out here.

I can not find any answers. I know there are people here that know what I am talking about.

Posted by: mrnikko

I too am having the same problem. Have a MotoQ from Alltel and had it flashed to cricket. it tells me "Incorect Username & Password"

All the settings are correct, however I can't get onto the net