vB Easy Archive - at&t and my pebl

Pages: 1

at&t and my pebl
(Click here to view the original thread with full colors/images)

Posted by: dirty moose

i was told to look here form some help!

I just bought an un locked pebl of eBay and its not going to good.

I cant send or get picture messages
I cant get on the internet
and a lot of the time i don't receive phone calls

Im using cingular/att
I tried calling cingular and they were no help, they said cause its an un locked phone theres nothing they can do. so i turn to you guys for some help
Is this a problem that can be fixed?
or am i stuck with what i got?

Thank for the help

-DM

Posted by: petard

you need to set your WAP settings

Posted by: efparri

Perhaps many of the settings on the phone are hard-coded to those of the original carrier, either T-Mobile, Cellular One/Dobson or SunCom. Which carrier logo is on the phone?

Posted by: dirty moose

There is no company name of the phone.

how would i set my WAP settings?

Posted by: bodeh6

Just copy them from here link

Posted by: dirty moose

im on the pebl not the v3

Posted by: jojosung

the setting is not device specific :-D
just do it.

Posted by: SHoTTa35

Of-course AT&T wont have settings for the PEBL since they don't carry that phone. The V3 uses the same OS. That's like you telling me the settings for your Comcast and Compaq computer is different than mine an IBM and Comcast both running Windows XP.

The PEBL didn't have info for AT&T's server so you need to manually put them in. After that you should be ok

Posted by: dirty moose

i put everything in and its still coming up as network not available.
any other ideas?

Posted by: RogerPodacter

maybe he doesn't have a data plan?

Posted by: efparri

Quote:

Originally Posted by dirty moose

i put everything in and its still coming up as network not available.
any other ideas?

Make sure that you entered the User Name and Password in upper case. You may not be able to reach the MEdia Net homepage because http://device.home means nothing to your phone. You will have to enter a real Internet address. You can try this:
http://infospace.com/infow.sbcw/

Do you have a "G" showing on your screen? This indicates that you have connectivity.

Posted by: Jay

4th post down

vB Easy Archive - PEBL can't setup SMS&TEXT for Cingular?

Posted by: dirty moose

ok i called cingular again and this time i got one of the best CS reps i ve ever spoke to, she walked me threw everything, took her an hour!!!!
here it is..
everything is CASE sensitive...

MEdianet:

Name: MEdia Net
Homepage: http://device.home
Service Type 1: WAP
Proxy 1: 066.209.011.061
Port 1: 9201
Domain 1:
Service Type 2: WAP
Proxy 2:
Port 2: 9201
Domain 2:
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes
CSD No. 1: 14152441012
User Name 1:WAP@CINGULAR.COM
Password 1:CINGULAR1
Speed (Bps) 1: 9600
Line Type 1: ISDN
CSD No. 2:
User Name 2:
Password 2:
Speed (Bps) 2: 9600
Line Type 2: ISDN
GPRS APN: wap.cingular
User Name: WAP@CINGULARGPRS.COM
Password: CINGULAR1

MMS:

Name: MMS
Homepage: http://mmsc.cingular.com
Service Type 1: WAP
Proxy 1: 66.209.11.61
Port 1: 9201
Domain 1:
Service Type 2: WAP
Proxy 2: 000.000.000.000
Port 2: 0
Domain 2:
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 10 minutes
CSD No. 1:
User Name 1:
Password 1:
Speed (Bps) 1: 9600
Line Type 1: ISDN
CSD No. 2:
User Name 2:
Password 2:
Speed (Bps) 2: 9600
Line Type 2: ISDN
GPRS APN: wap.cingular
User Name: WAP@CINGULARGPRS.COM
Password: CINGULAR1

Posted by: dirty moose

one other area we changed was this;
in the text message set up screen

store to: phone
reply type: text message
email gateway: 36245
service centre number: +13123149810
use gprs: no

Posted by: ports

Bud.

I have a t-mobile pebl i use on cingular. i bought mine off ebay too.. it came unlocked.
the best thing you can do is get the PEBL Motorola generic OS and flash it to your device. It gives you access to all the MMS and Web settings that were previously blocked. I think my phone runs just as well as it did before. Not better, but not worse. I also have access to the antenna gain which is nice. I can lower it to save battery life.

Posted by: dirty moose

ports: i wish i knew how to do that stuff, i don't have the "official" cable to connect the phone to the computer. i have one that was intended for a digi cam but its the same size. that being said my razr used connect just fine with it, but my pebel does nto show up on p2k. any ideas?

Posted by: ports

try p2ktoolsvs (p2ktools3)

you may have to buy a cable for it.. my phone came with it.

Posted by: dirty moose

1.
Press the Menu Key.
2.
Scroll to and select "Settings"
3.
Scroll to and select "WEB ACCESS".
4.
Scroll to and select "Web Sessions."
5.
Highlight "MMS" and press the Menu Key.
6.
Scroll to and select "Edit".
7.
Validate the following parameters:
*
Name: MMS
*
Homepage: http://mmsc.cingular.com
*
Service Type 1: WAP
*
Gateway IP: 66.209.11.61
*
Port 1: 9201
*
Domain 1: blank
*
Service Type 2: WAP
*
Gateway IP 2: 000.000.000.000
*
Port 2: 0
*
Domain 2: blank
*
DNS 1: 000.000.000.000
*
DNS 2: 000.000.000.000
*
Timeout: 10 Minutes
*
CSD no 1: Blank
*
Username: 1: blank
*
Password 1: blank
*
Speed (Bps) 1: 9600
*
Line Type 1: ISDN
*
CSD no 2: blank
*
User Name 2: blank
*
Password 2: blank
*
Speed (Bps) 2: 9600
*
Line Type 2: ISDN
*
GPRS APN: wap.cingular
*
User Name: WAP@CINGULARGPRS.COM
*
Password: CINGULAR1
8.
Press the left soft key 4 times to return to the main menu.
9.
Scroll to and select "Messages".
10.
Press the Menu key.
11.
Scroll to and select "Setup".
12.
Scroll to and select "Message Inbox".
13.
Scroll and highlight "MMS Message Setup" and select "Change".
14.
Scroll to and select "Server Info".
15.
Scroll to "MMS", then press the Menu key.
16.
Scroll to and select "Edit".
17.
Validate the following settings:
*
Service Name: MMS
*
Server Name: http://mmsc.cingular.com
*
Web Session Name: MMS

Posted by: ports

once you get a data cable. you can input those settings in P2k Tools VS and send them to your phone. makes it nicer not having to tap out http://