|
Originally Posted by greenteeth
I thought this only applied to phones that were not 1.1.2 OTB?!?! I was under the impression that 1.1.2 OTB can not be downgraded.
|
|
Originally Posted by BornInBremen
You are correct. However, 1.1.2 OTB can be jailbroken, which will bypass AT&T activation, and the phone will work with any AT&T SIM. It won't work with a foreign (non-AT&T) SIM, however, meaning you can't swap in a T-Mobile SIM, for example.
But it'll work fine on AT&T. |
|
Originally Posted by greenteeth
Downgraded to 1.1.1 and jailbroke my phone. Popped in my att sim and it recognizes my phone number in the dialer/contacts menu but I can't make calls/access the network. Do I now need to upgrade back to 1.1.2?!?...and if so, will I still have installer available on my home screen?
|
|
Step 3: If you are on this step you have an activated iPhone running firmware 1.1.1. Visit www.jailbreakme.com URL on your iPhone (you need WiFi to do this as the Edge network won't be working). Click "Install AppSnapp". Your iPhone will navigate to another page and briefly show a blue square in the upper corner before Safari crashes. At this point a status HUD should pop-up and display the status of the jailbreak. If you do not see this status HUD, go back to www.jailbreakme.com and try it again. After a successful jailbreak, your iPhone will soft-restart and you will see Installer.app on your homescreen. At this point I find it's best to do a manual restart (hold the power button until the "slide to power off" slider appears. Slide it off, then hold the power button until the iPhone starts back up). This step is optional though. Step 4: If you are on this step, you have a jailbroken (if you have Installer.app, you are jailbroken) iPhone running 1.1.1 firmware. Click on Installer on you iPhone homescreen and allow it to check and refresh your sources. If necessary, update Installer (you will see an Installer update in the update tab in Installer if this is necessary). Under the Install tab, navigate to Tweaks (1.1.1) > OktoPrep and download OktoPrep. After the download, click the home button and allow the iPhone to soft-restart. Back in iTunes, shift-click on "Upgrade" (NOT RESTORE!) and navigate to your 1.1.2 Firmware (download here). If iTunes is already prompting you to upgrade to 1.1.2 it is not necessary to shift-click...simply click "Upgrade" and allow your iPhone to be upgraded (NOTE: if you do this, iTunes will automatically download the firmware taking around 5 mins at broadband speeds). Step 5: If you are on this step, you have an iPhone at the activation screen running firmware 1.1.2 and had installed OktoPrep on 1.1.1 before upgrading. Close out of iTunes. Unzip and open the folder containing the 1.1.2 Jailbreak (download here). Double-click on windows.bat and hit enter when Command Prompt pops up. A Java window will pop up (I would suggest to check "Install SSH" but that's up to you). Click Jailbreak! A progress bar will pop up and Command Prompt will start displaying code. Let the program run (it should take under 10 minutes). After it's finished it will say "Done! Reboot your device (it will automatically reboot once after you do so)". And wala! JAILBROKEN |
vBulletin Copyright ©2000 - 2008,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2008
- Created by Stefan "Xenon" Kaeser