vB Easy Archive - How To Save A Wet Phone!!

Pages: 1

How To Save A Wet Phone!!
(Click here to view the original thread with full colors/images)

Posted by: Mizah

I have heard alot of storys about electronics being spoiled from water, especially phones! So here i am trying to help you save your phone and i am very sure it will work.

I AM NOT RESPONSIBLE IF YOU DO SOMETHING WRONG AND WRECK YOUR PHONE

The electronics will not be harmed by the water. What WILL harm them is trying to turn them on while circuits are shorted by the water. So DON'T try to turn the phone on until you have done this.

Scientific fact: Pure water does not conduct electricity. It's the impurities in it that conduct. Salt is an excellent conductor, and so is saltwater. So if your phone got wet with saltwater or water with bleach or chlorine in it (ie.- municipal water... chlorine is a "salt"), the first thing to do is remove the battery and SIM card and immerse the phone in distilled water to get the salt out. Distilled water is available in any drugstore and most auto parts stores.

Not only is salt conductive, it's also corrosive and will eat up microcircuits, so this should be done ASAP. This also applies if the battery is overcharged and leaks inside the phone. Battery "juices" are conductive and even more corrosive than salt. You can leave the phone in the distilled water without any damage till you get the silicone or WD-40 for the next step.

You don't have to do the distilled water thing if your phone got wet in fresh water, but it wouldn't hurt just in case there were alot of minerals in the water. Second step is to get a big can of either electronics cleaner, Brake Kleen (available in auto parts stores), or WD-40. Electronics cleaner is pure liquid silicone, and it's the better choice (it won't leave a smell) but in a pinch WD-40 will work (but your phone will smell like it forever). Brake Kleen is a solvent that leaves no smell or residue. Turn the can upside down and push the button till all the pressure is out. Then take a can opener and pop the bottom of the can and pour the stuff in a bowl or something (you want some depth here, so use a small diameter bowl, and make sure you get a big can). Take the phone and put it in the silicone/WD-40 and turn it over and around in the stuff. You want to get the stuff through the whole inside of the phone so turn it in every possible position.

The silicone/WD will drive the water out of the phone, so you want to also turn it so the water can run out of the various openings (like the battery cover) It would be helpful to disassemble the phone as much as possible before doing this, but I realize most people don't have the tools to do it or are afraid to try it. This will work anyway. You may see beads of water at the bottom of the bowl when you are done doing this. That's the water that was in your phone. Leave the phone in the silicone/WD for about 15 minutes and then take it out and let it dry on some paper for about 24 hours. Then it's safe to put your battery back in and charge it.

That's all kiddies. And if you have to use this procedure, good luck and I hope it works for you.

Peace,

Mizah

PS: Feel free to sticky this. :P

Posted by: Paolo

You failed to mention the success rate is relatively low for this, plus your LCD will automatically be shot once water or any liquid to that matter gets inbetween the crystals and will never dry out properly.

Posted by: al_capone_x3

ive still heard a bag of rice is like the best thing to do.

Posted by: HC - NO "i"

Mizah,

Not discounting your experience or approach, however, we have threads like that before like...

http://howardforums.com/showthread....078#post5569078
http://howardforums.com/showthread....219#post6901219

Plus, Paolo has pointed out the concern of damaging the LCD module altogether. WD-40 is NOT ideal in repairing electronic devices like cellphones anyway.

Posted by: Mizah

Okay, well im just trying to help.. Sorry i guess?