Nokia 8600 luna: Swedish Product code

Originally Posted by Moderator HF 25

Try 0550847

Originally Posted by Moderator HF 25

^ There're always risk involved. Try put the original product code back and flash it again. See if it's the problem.

Originally Posted by loveanh

Does it contain the email client? My "Made in Korea" does not have it so I'm looking for the Euro product code so I can flash my Luna.

Originally Posted by Moderator HF 25

^ Why not tell us your product code first? Made in Korea/Germany/Hungary/Romania/China/India isn't relevant. It's the software and factory tunings.

Originally Posted by ozziez2001

Well when i change to the original everything is fine but when i change it back to the swedish the problem occur. Would another code maybe solve the problem, if so, if someone has any product codes for scandinavian language pack for the luna, could u help me

Originally Posted by Moderator HF 25

^ ok, so you have the North American regional variant w/ language pack N. Try the codes for UK: 0546145 or 0550136. BTW, you can find those codes by Google. Just remember, there're always risks to lose something in order to get "more".

Originally Posted by Moderator HF 25

^ Of course, you'll have those Scandinavian language: that's what I've told you about language pack A is more likely for the OP. But the most important issue: After you've done Factory reset, both email client and voice command start working again? Also, using NSU to update the firmware like in this case w/ different product codes, you gotta be careful. Some variants may not have newer firmware version than some others. Thus, you'll stuck w/ the "newer version number" regardless of whatever product codes.

Originally Posted by Moderator HF 25

^ Thanks for your sharing. For Gmail: No, and I think you should your new question in the main forum instead as it's already beyond the scope of this thread.

Originally Posted by loveanh

I tried 0550136 and 0546145, no email client and the voice command does not work. I also tried 0548200 too and same issues. I then tried 0551946 but no updates available. I changed it back to my original product code, 0551900 but NSU would not update it back to the original f/w.

I went into NSS and went over to the "Tools" tab and under "Factory Settings" selected "Full Factory" and pressed "Reset."

After that I pulled the battery out and it restored everything to the original settings but all of my data is still here. But under "messaging" there's the email client I was looking for all along. Weird.

Under language it no longer has "Espanol", "Francais" and "English", it now has "English" along with:

Suoimi
Svenska
Dansk
Norsk
Deutsch
Islenka

Originally Posted by ozziez2001

Which code did you use?
I have 0548921 and it has English, Urdo, farsi, german.
I do have the email client.
But when i flashed and changed code, the voice commands stop working, and the speaker volume has gone down (but only for music, alarm not the ringtones)

Originally Posted by Moderator HF 25

ozziez2001, have you tried Factory reset AFTER flashing?

Originally Posted by ozziez2001

I will have to wait until tomorrow to do that. This PC i have wont work properly, so im affraid to flash the phone on it.

Let me just get this right, its:

Start NSS
Scan for new device
Phone info
Scan
Change product code to 0550136 --> Enable --> Write
Then
Choose tools
And then Factory Settings
Select Full Factory and press Reset

Then what?
Should i update with NSU or...?

Originally Posted by loveanh

change to the product code you want first then update the f/w on NSU

after that go back to NSS and Choose tools
And then Factory Settings
Select Full Factory and press Reset
pull out the battery and put it back

that should fix the voice command problem

Originally Posted by ozziez2001

How about the speaker problem?
Is your volume lower after update during music or alarm?

Edit: the volume works fine sometimes if i restart the phone and sometimes it doesnt

Originally Posted by loveanh

0550136, use that and the procedure I described above but be careful because you may brick your phone, it worked for me but I'm not guaranteeing it will or will not

Originally Posted by ozziez2001

0550136 this code does not include Swedish.
And is this procedure riskfull, and is it reversible?

Originally Posted by ozziez2001

Thanks for all the inputs, it is much appreciated (spelling?). I think i will go to a repair shop and pay for fixing the problem.

Originally Posted by ozziez2001

loveanh, you said your phone has swedish now, could you test the voice command on swedish if it works?

Originally Posted by ozziez2001

Update:
Well im getting sick of all the problems im having with the scandinavien language pack. These are the things gone wrong:
Voice command
Volume during music and alarm
Animation lag during screensaver
Bluetooth, i can connect but i cant recieve files

And whats the slide animation (Settings->Display->Standby mode settings)? on my phone theres no difference wheter its on or off?

I think that i will try the method loveanh suggested.
Im going mad some functions are important to me.

Originally Posted by Moderator HF 25

Have you ever try to:

a) Do a FACTORY RESET by NSS?
b) Do a Reset to default settings in phone settings?

Originally Posted by Moderator HF 25

Have you ever try to:

a) Do a FACTORY RESET by NSS?
b) Do a Reset to default settings in phone settings?

Originally Posted by ozziez2001

Wow thank you so much it works perfect if i were rich i would send you some money, so i will do the next best thing ill have a drink in your honor cheers
Thanks to both of you