ZiPhone 1.1

Originally Posted by ripperbone

i cant download it the file is deleted

nevermind got it off the guide page

Originally Posted by Lestat_d

Have you done one of your IPSF phones yet Drak? Did you have to still put signal.app/sh on it after jailbreak/activate?

Originally Posted by Drakkhen

Can it get ANY easier???

I want to see who starts the thread for the first problem...boy I'm just getting ready to flame him/her and belittle their intellects...MUuwwhahahAHAHAHHA

L.

Originally Posted by Drakkhen

Don't use the iclarified guide...

Use this one:

1) Connect iPhone
2) Run ziphone 1.1

L.

Originally Posted by rushco

Worked great for me. I restored to 1.1.3 with 3.9 and ran this and started fresh. Just need more programs to work with 1.1.3

It looks like I have roughly 180MB in other. Is that normal?

Originally Posted by rushco

I used anysim 1.3 that works for me.

Originally Posted by C-Dub

Do you mind telling me the steps that I'll need to do to get my 1.0.2 OTB, now at 1.1.2 BL 3.9 (unlocked with AnySim1.2) phone to 1.1.3 unlocked?

Thank you so much!

Originally Posted by C-Dub

Do you mind telling me the steps that I'll need to do to get my 1.0.2 OTB, now at 1.1.2 BL 3.9 (unlocked with AnySim1.2) phone to 1.1.3 unlocked?

Thank you so much!

Originally Posted by Drakkhen

Don't use the iclarified guide...

Use this one:

1) Connect iPhone
2) Run ziphone 1.1

L.

Originally Posted by rushco

Upgrade via itunes to 1.1.3 and run this program. When you run the program just click on jailbreak and activate. Then install anysim 1.3 and you are good to go. I would start fresh and change all the settings again. But that's just me. I am sure you can restore from last backup though but I heard of some problems.

Do you need more detailed instructions?

Originally Posted by C-Dub

ruscho, thank you for your time responding me

I have 2 more questions for you.
1. What do you mean start fresh? Can you be more specific? Do you mean restore my current 1.1.2 3.9BL phone back to clean 1.1.2 before doing anything?

2. In order to use AnySim1.3, do I need Community Sources (Sources), BSD Subsystem (System), or OpenSSH (System)?

Thanks a bunch!

Originally Posted by lunasicc

Don't mean be sound annoying but you could someone answer my post really quick. I'm sitting here with the IPhone and Ziphone running but just want some confirmation that Ziphone will work on my phone before running it.

Thank in advance guys!

Originally Posted by lunasicc

Thank you man, really appreciate it. I have one more question though, are there any side effects after using this program? Also, do I need to install any other apps?

Thanks again for responding.

Originally Posted by msk

if you are going to be that paranoid, you might as well put it back in the box and return it.

Originally Posted by SocALTEZZA

i am also having the same problem as chrigel65, just the silver apple logo, restored twice and nothing.

Originally Posted by Chrigel65

i have two 1.1.3 virgin phones, week 28, never done anything except updated to 1.1.3. Does not work at all. Always get stuck with the Apple logo on it and it says "loading zbri.dat".
I restored it to 1.13 and started over. No clue why it does that.

Originally Posted by SocALTEZZA

im just going back to the old ziphone that i was already having problems with

Originally Posted by SocALTEZZA

im just going back to the old ziphone that i was already having problems with

Originally Posted by dfaulting

By any chance do you still have the download link for the old ziphone? I'm having the same problem on my mac, the new version doesnt work while the previous version worked, but i deleted the old one.

Originally Posted by ciphe

stuck on apple logo as well...this sucks. anyone?

Originally Posted by wick3d-G

I'm on the same boat, but I can't even boot to recovery mode to do a restore. I think it's bricked! Tried so many things =/

Originally Posted by wick3d-G

I'm on the same boat, but I can't even boot to recovery mode to do a restore. I think it's bricked! Tried so many things =/

Originally Posted by SocALTEZZA

have you guys tried holding the home\sleep buttons and letting go of both when it goes black. than power back on, thats what i did

Originally Posted by lunasicc

Tried it, still getting the Apple logo.

Originally Posted by krs71

anyone have a download for 1.1 that's not on a upload site, my work network blocks those sites......

Originally Posted by krs71

ok, I'm confused, is this better than the 1.0 that was released earlier today?

Originally Posted by Drakkhen

What does 'bricked' mean to you?

L.

Originally Posted by wick3d-G

This version DEFINITELY has bugs. I HIGHLY RECOMMEND you do not use this version as it likes to "hang" during the install and will cause frustration and loss of time. I recommend this version:

http://home.no/geezuzz/ZiPhoneGUI.exe



Fixed it and wrote up a quick guide for helping others who go through this.

Originally Posted by bardiel

The ZiPhoneGUI version doesn't work for me.
It looks like it's doing something, but once it's done i get the "slide for emergency" again.
I've tried doing one step at a time, with a restore in the middle.
Does it matter what version of iTunes is installed?

Originally Posted by eywleung

I am having the same problem. I have tried all three versions of ziphone:

The first version I got the "Done!" message, but I get the "Slide for Emergency" screen

The second version of v1.0, I didn't get the "Done!" message, but I was sent back to "Slide for Emergency" screen while the command prompt still say "Please wait 45". "

The V1.1 GUI is the worse, it just freeze at the apple screen

I have done a full restore with iTunes after each failed activate/jailbreak

I am using iTunes 7.6. It's a 3.9BL phone originally 1.0.2, then upgraded to 1.1.1.

PLEASE HELP. I am now with an unactivated phone!

Originally Posted by eywleung

I can't even downgrade back to 1.1.1 . I get an error on iTunes 7.5 saying there is an unknown error after extracting the files. (<-- that is, before the restore) I used shift+restore, then it extracts the file, and immediately gives me an error.

Originally Posted by BigBig

Hi Geek

I have a 1.0.2 phone jailbroken/unlocked/activiated, can I just upgrade via itunes to 1.1.3 and run this program? Thanks

Originally Posted by ciphe

youtube fix..anyone????

Originally Posted by GeeK.dLL

YouTube fix for 1.1.3 is up on the WiKi please search the wiki you might find your answer.

Originally Posted by iamthedudeman

Tried that. As well as three others. None work.

Originally Posted by GeeK.dLL

If you used the lastest ZiPhone 1.1 youtube should be working. If not I would restore your iPhone and do it again.

Originally Posted by Mohit

The new ZiPhone 1.1 is terrible, had to use the manual ZiPhone and it worked just fine

Originally Posted by deedeecee

i seriously need some help.

I followed the iClarified guide but used Ziphone 1.0GUI. Put the iPhone in restore mode and ran Ziphone. Ziphone gave me the 2.30 minutes msg, continued to look for iphone...for a very long time. The iPhone now is frozen at the startup apple logo image. Any suggestions?

Originally Posted by GeeK.dLL

Heres ZiPhone 1.2

It now unlocks both 4.6 and 3.9 BL.
And it's autosensing.. just use -u !

Download Link

We are still waiting for geohot to fix the 4.03 unlock on 4.6BL.

Originally Posted by GeeK.dLL

Heres ZiPhone 1.2

It now unlocks both 4.6 and 3.9 BL.
And it's autosensing.. just use -u !

Download Link

We are still waiting for geohot to fix the 4.03 unlock on 4.6BL.

Originally Posted by halfsjj

Geek,

Can you repost a working link?
Thanks

Originally Posted by halfsjj

Geek,

Can you repost a working link? Also I noticed in this thread a lot of the phones having difficulty with Ziphone 1.1. Does this 1.2 correct anything or has there not been enough testing?

If anyone has used it successfully, please post.

Thanks

Originally Posted by Freaky_Llama

I agree. Now that I've had the chance to use the 1.2, I DO NOT recommend it.

I had the same issues as others.
If you have the stuck at apple screen issue, power off the phone. After it is off, hold home, and press and hold the sleep button. Once the phone turns on, let go of the sleep, but keep holding the home button. You will get the cable to itunes screen. Then use ziphone and redo the process. I personally used the ziphone 1.1 GUI, and now I'm back to my phone with installer on it.

Originally Posted by eywleung

For those with problem with the "forever apple logo" try this.

I used ziphone v1.2, put whatever options in, then i got apple logo and it stays there.

after waiting 5minutes, I unplugged the phone, turned it off by pressing both home and power button. Wait until it's COMPLETELY OFF

then I exited iTunes and iTuneshelper.

Manually enter recovery mode by holding home button and plug in the cable.

Using command prompt, I enter "ziphone -v". Remember, V only. The phone will boot up and whatever option (jailbreak, activate, unlock) will be finally applied.

I did all this on a 3.9BL phone, using ziphone to jailbreak activate and unlock. No anysims used. :-)

Hope this helps

Originally Posted by sleepyhatch

Do you loose your contact info (telephone numbers) during the process?

Originally Posted by GeeK.dLL

wait for ziphone 2.0
Release is near
Will have support to unlock baseband 04.03 (which means google maps locate will work)
have patience young jedis

Check the WiKi

Originally Posted by halfsjj

Sounds like a plan. When you say near do you mean in terms of days or weeks. I just want to know how to proceed. I am going to unlock a 16GB, but may just hold off or keep it at 1.1.2.