vB Easy Archive - CPR problem... help needed please

Pages: 1

CPR problem... help needed please
(Click here to view the original thread with full colors/images)

Posted by: karappo

I just bought a docomo n-03a, which came with an i-smartphone 2009 hypersim. when inserted with my own sim, I got the uim not recognized message.
I tried to cpr using a samsung t309. About half of the time the phone 'froze' and restarted after a few minutes, the rest of the time it got a signal,calls would get through, but end either immediately or about 20 seconds later with a sim card crash message. [sim card alone, the phone worked normally]

I tried using a Mr.Sim v2.1 with the same results.

is this a problem with my carrier or the hypersim itself?
[using at&t in the SoCal region, and getting full bars on my cpr phone]

Any help would be greatly appreciated!

Posted by: singo

ok try put ur hypersim+simcard into ur normal cpr phone.....if its ok then ok if not then ur hypersim faulty......

Posted by: karappo

that's the part I'm confused about because the cpr phone works at first, then crashes a few seconds after the call goes through...

Posted by: hiallall

where are you locate ?

Posted by: yukihiro

That's weird. I've used a Samsung e335 and t809 to CPR on t-mobile and it's been fine. I think the AT&T 1900mhz reception is okay in most of socal... That's weird that your CPR phone has been crashing with the hypersim.

Hmm... is your CPR phone unlocked to AT&T? I don't know if that makes a difference, but maybe you could try to CPR with a different phone?

Posted by: singo

yah try using differ phone if still crash then surely ur hypersim......

Posted by: IonNuke

If it's crashing then it's pretty much the hypersim that's going out on you.

Since hypersim is a sim proxy. It reads the hypersim first and all the instructions on it then it will read the sim card. So if something is damaged or wrong (usually damaged hypersim) it will try to re-read and if unsuccessful then it will hang or lock up.

When it hangs or lock-up that's probably when the phone just crashes or reboots because it doesn't know how to handle the hang/lock-up.

Posted by: karappo

Thanks for all the help...
I received a new hypersim (Mr. Sim v2.1) today but now it's only showing "INSERT SIM" for both the CPR phone and docomo phone. I don't really know what to make of it ....

Posted by: IonNuke

That means the hypersim doesn't support your SIM or is inproperly programmed and all kinds of details