|
Originally posted by Deep Blue II could u add the saudi tele communication operator logo Saudi Arabia Aljawal the file is attached with this post |
|
Originally posted by Deligon EPS is fine, but normally I take the logo from their site and make it fit. |
I know, I know, I'm a serious noob!
There is a screen cap utility in FExplorer too. Too bad it doesn't work for the 6600.
. Well you wanted me to take a screenshot so here it is.















It's "310 26" btw.

*wink-wink*)
|
Originally posted by smfa1965 I tinkered around with this last night and no go. I'm running FExplorer, copied the logo *.bmp to c:\system\apps\phone\oplogo, right clicked on the bmp, selected set as op logo. Phone restarted and nada. Of course I guess I should ask, does this work with SX-1. Perhaps all my work was in vain!! |
|
Originally posted by angel_wing0 i think u should try SeleQ..but it should work..both using the same OS... |
|
My oplogo for tmobile service is stored in C:\system\Apps\phone\oplogo\ and is titled 310_260_0.bmp That might help. |
|
Originally posted by smfa1965 Sorry, but what is SeleQ? |
|
Originally posted by mrpunkin Operator logos don't work on my 6620. I have ATT and tried naming it 310_380.bmp, 310_380_0.bmp, 310_26_0.bmp, and 310_260_0.bmp and no luck any of the times. |
|
Originally posted by Denesfay Man i don't have any Phonefolder in C on my 7610. I have one on Z though. But no folder that says Oplogo. And i can't make one either. How do you get a new OP Logo on 7610? |
|
Originally posted by Denesfay man i come to C:/System/Apps/------ I have no Phonefolder there...should i make one or what? |
|
Originally posted by mrpunkin Operator logos don't work on my 6620. I have ATT and tried naming it 310_380.bmp, 310_380_0.bmp, 310_26_0.bmp, and 310_260_0.bmp and no luck any of the times. |
|
Originally posted by e13290 HOW should i name the file? i am a Cellcom (israel) customer. TIA
|
|
Originally posted by praz btw there is no code for the indian operator logo :S so how will that work ? |
| Well that one of the reasons I recommend SeleQ, because you don't have to figure out the MCC MNC of your carrier. But typically it's MCC_MNC_0.bmp Both your MCC and MNC should be 3 digits and located at C:\system\apps\phone\oplogo\ |
what else can i do? |
Originally posted by e13290 i found the no. rename the file (as you told me...) rebot the phone and.... it didn't work! what else can i do? i am QD user. TIA man!! |
|
Originally posted by e13290 its work!!!install seleq ang choose the option: set as opereator logo |
|
Originally posted by KrazyKritter Every carrier in the world has a code so it works no different in India than anywhere else. |
|
Originally posted by praz no i meant where to get the indian codes .... cause its not there in the readme file which is there in the zip file ..... so where to get the codes from ty |
|
Originally posted by KrazyKritter An easy way to find out is to check out the celltrack available at my-symbian.com and other places. |
|
Originally posted by angel_wing0 anyone have more fido logos actually? |
|
Originally posted by praz tell me one thing why do u love fido sooooooooooo much ? :P |

|
Originally posted by potatoho I'm also having the same problem. |















|
Originally posted by dikhed Heres a Fido, anyone else? |
|
Originally posted by angel_wing0 nice one man..i think there are two vewrsions of that logo, one is pull towards the left, and one is in the center just like the one i have o my sig
|

|
Originally posted by Soul814 ehh cant get it to work on my n-gage tmobile >> 310_260_0.bmp right? in c:\system\apps\phone\oplogo\ used seleq to do it and it doesnt work any clues? |
|
Originally posted by robgtheengineer Anyone have any op logos from some japanese service providers? |
|
Originally posted by robgtheengineer I would like to see one though |

|
Originally posted by Justin5117 Is there anyway to restore it to the default logo. Like on my N-Gage the plain back Cingular text. |
|
Originally posted by endless402 hmm opened the zip file and i got a virus...backdoor.prorat |
|
Originally posted by angel_wing0 hey anyone has the new Rogers op logo? |
|
Originally posted by flipflash77 The "Roger's Wireless" one? I made this one real quick and dirty, but Wireless is written in a small font so it looks a bit grainy. and the circle itself isn't very nice having been squished down to cram is all in. It's not bad, but could be better. |
|
Originally posted by mbranscum I installed the Cingular app in this path: C:\System\Apps\Phone\Oplogo\xxx_xxx_0.bmp ...but all I see is the same generic Cingular logo I have always had. Any ideas??? |
|
Originally posted by angel_wing0 its firmware related..all u really can do is flash the phone with GENERIC firmware... |
|
Originally posted by HighLife Ive come to the conclusion that Op logo is a waste of time for me. Reason being that when you use a Op logo with theme, it will place a white box that the logo sits in, unless you get it to match the background of your theme, doesnt seem like it would be nice to have that messing your theme colors up =) |
It's not that hard to make. I was able to change the logo on my 7610, but can't seem to get it to stick on my 6260. Cingular seems to have two different MCC/MNC combos now. One is 310_17_0.bmp and the other is 310_380_0.bmp. I guess it might be the att merger. The 310_380_0.bmp works on my 6260 sometimes when it roams I guess, but I can't get the 310_17_0.bmp to work, which is the network that is usually used. Has anyone been able to change their oplogo on a 6260? Please help!
|
Originally posted by Draven Wirelessly posted (Nokia7610/2.0 (4.0421.4ch) SymbianOS/7.0s Series60/2.1 Profile/MIDP-2.0 Configuration/CLDC-1.0) That's why you create your own logo. It's not that hard to make. I was able to change the logo on my 7610, but can't seem to get it to stick on my 6260. Cingular seems to have two different MCC/MNC combos now. One is 310_17_0.bmp and the other is 310_380_0.bmp. I guess it might be the att merger. The 310_380_0.bmp works on my 6260 sometimes when it roams I guess, but I can't get the 310_17_0.bmp to work, which is the network that is usually used. Has anyone been able to change their oplogo on a 6260? Please help!
|
|
Originally posted by HighLife Ive come to the conclusion that Op logo is a waste of time for me. Reason being that when you use a Op logo with theme, it will place a white box that the logo sits in, unless you get it to match the background of your theme, doesnt seem like it would be nice to have that messing your theme colors up =) |
|
Originally posted by angel_wing0 aleinware?! |
|
Originally posted by pker88 got any alienware ops logo? |
LMAO
|
Originally posted by angel_wing0 ^ NICE..neon lights?
|
|
Originally posted by angel_wing0 the blue looks "neon-ligh"ish, thats all
|
lol
s
|
Originally posted by gurdeep4u heloo i have nokia6610 fone which is support only 4000+ color . is there eny sofware tht make it to support 65k color |
|
Originally posted by chemo i use this rogers one i tinted it to match my theme. looks crispy |
)
|
Originally Posted by alt0160
here's a SmarTone oplogo.
for a couple mins while at v.mills... i saw my fido oplogo as i set it.. but then it went back to normal... hmm... can't attach image via hofo.. ![]() |
)|
Originally Posted by alt0160
my network setting was set to manual and i lost reception. so when i looked at my phone i saw the fido oplogo that i loaded.. but it didn't look very nice with the theme i was using.. but was cool to see though.
|
|
Originally Posted by angel_wing0
yip...flash it with unbranded fw and it will probably work (not 100% guaranteed, so dont kill me if it didnt
) |
|
Originally Posted by Deligon
Sure thing. I found a sim card at the gas station on the ground here in Washington DC about 6 months ago and when I popped it into my phone it was a pre-pay sim from Macau
![]() |
|
Originally Posted by berry_lthird
How do you get the op logo to appear instead of the text?
I am using Cincinnati Bell on a Nokia N-Gage. |
I failed to mention that nothing I have tried works so far! I have tried FExplorer as well as SeleQ and OpMan to no avail. I have also tried storing the image file in the appropriate directory.
|
Originally Posted by berry_lthird
Oops!
I failed to mention that nothing I have tried works so far! I have tried FExplorer as well as SeleQ and OpMan to no avail. I have also tried storing the image file in the appropriate directory.The only thing that appears where the logo should be is the text, "Cincinnati Bell". But OpMan shows the logo in use, even though it does not appear. Is there a special way to name the file (for the carrier)? What are the image file format specifications? .GIF? .BMP? colors? file size? etc. And Merry Christmas, y'all! ![]() |
|
Originally Posted by Deligon
As for the file naming yes, for example T-Mobile is 262_1_0.bmp
Format is 8-bit indexed bitmap. |
vBulletin Copyright ©2000 - 2008,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2008
- Created by Stefan "Xenon" Kaeser