vB Easy Archive

Pages: 1

help
(Click here to view the original thread with full colors/images)

Posted by: amod

Please help

i want any protocol or AT commands to access Phone book from Panasonic GD87.
I am using IR port. I know AT+CPBR command but it ony give two fields i.e Name and One Number.
But I want Whole Record i.e all numbers as wll as email id.
Please....

Posted by: RedDiablo

Quote:

Originally posted by amod
Please help

i want any protocol or AT commands to access Phone book from Panasonic GD87.
I am using IR port. I know AT+CPBR command but it ony give two fields i.e Name and One Number.
But I want Whole Record i.e all numbers as wll as email id.
Please....

AT command AT+CPBR Work with Phone book on SIM-card, for work with phone book on mobile, you must use AT this command: AT+CMEPBR
The full list of AT-commands in phones Panasonic, is deduced by AT*L AT-command

Posted by: amod

Quote:

Originally posted by RedDiablo
AT command AT+CPBR Work with Phone book on SIM-card, for work with phone book on mobile, you must use AT this command: AT+CMEPBR
The full list of AT-commands in phones Panasonic, is deduced by AT*L AT-command

hi
this command is not working.
It gives error as
cme ERROR 14

Posted by: RedDiablo

Quote:

Originally posted by amod
hi
this command is not working.
It gives error as
cme ERROR 14

This error (CME 14) means about: "SIM busy" (And what command print a error?)

Posted by: amod

Quote:

Originally posted by RedDiablo
This error (CME 14) means about: "SIM busy" (And what command print a error?)

OK but what to do next?

Posted by: RedDiablo

Quote:

Originally posted by amod
OK but what to do next?

What command prints a ERROR? ( "AT+CMEPBR" or "AT*L")

Posted by: amod

Quote:

Originally posted by RedDiablo
What command prints a ERROR? ( "AT+CMEPBR" or "AT*L")

I tried the
AT+CMEPBR=?

it gives me now

CME : ERROR 3

i tried AT*L
i got list of commands supported by GD87
But the basic problem is i am not able to set the memory to "me"
the at+cpbs also not work it give same error as error CME 14
pllllllllll

Posted by: RedDiablo

Quote:

Originally posted by amod
I tried the
AT+CMEPBR=?

it gives me now

CME : ERROR 3

i tried AT*L
i got list of commands supported by GD87
But the basic problem is i am not able to set the memory to "me"
the at+cpbs also not work it give same error as error CME 14
pllllllllll

CPBS AND CPBR, CPBF on X70 (GD87 SAME?) not working with "ME".
For testing - print this commands: AT+CPBS? and CMEPBR=1,200

Posted by: amod

Quote:

Originally posted by RedDiablo
CPBS AND CPBR, CPBF on X70 (GD87 SAME?) not working with "ME".
For testing - print this commands: AT+CPBS? and CMEPBR=1,200

I have tested when i give

AT+CPBS?

+CPBS : "SM", 12,250

OK

AT+CPBS="ME"

OK

At+CMEPBR=1,200
+CME ERROR :14

Posted by: RedDiablo

Quote:

Originally posted by amod
I have tested when i give

AT+CPBS?

+CPBS : "SM", 12,250

OK

AT+CPBS="ME"

OK

At+CMEPBR=1,200
+CME ERROR :14

For use the command AT+CMEPBR, you not must switch in "ME"!
Leave in position "SM"! (AT+CPBS="SM")

Posted by: amod

Quote:

Originally posted by RedDiablo
For use the command AT+CMEPBR, you not must switch in "ME"!
Leave in position "SM"! (AT+CPBS="SM")

If not switch to "ME" when i give

AT+CPBS?

+CPBS : "SM", 12,250

OK

AT+CMEPBR=?

+CMM ERROR : 3

AT+CMEPBR=1,200

+CMM ERROR : 3

error 3 is for Operation not allowed.

Posted by: RedDiablo

Quote:

Originally posted by amod
If not switch to "ME" when i give

AT+CPBS?

+CPBS : "SM", 12,250

OK

AT+CMEPBR=?

+CMM ERROR : 3

AT+CMEPBR=1,200

+CMM ERROR : 3

error 3 is for Operation not allowed.

Ok, the logic of commands in X70 is advanced, and differs from GD87. I Now not have GD87 - and I cannot while to help you with this question.

Posted by: amod

Quote:

Originally posted by RedDiablo
Ok, the logic of commands in X70 is advanced, and differs from GD87. I Now not have GD87 - and I cannot while to help you with this question.

But sir as per my knowledge the GD87 and X70 are using same logic for AT command because my set give the list of AT Commands in that it supports the CMEPBR
i send u the following list pl can u do a small thing for me which commands are not there in GD87 and present in X70
List:
AT+ Commands:
FCLASS
FRH
FTH
FRM
FTM
FRS
FTS
CBST
CRLP
CGMI
GMI
CPAS
CGMM
GMM
VTS
CRC
CHUP
CLIP
CMEE
CREG
CSQ
COPS
CSCB
CBC
CIMI
CCLK
CPBS
CPBR
CPBW
CPBF
CMEPBR
CMEPBW
CMEPBF
CWSC
CRSC
CUPS
CUPL
CUPW
CUPR
SYSERR
DABORT
CSMS
CPMS
CMGF
CSCA
CMGL
CMGR
CMGD
CMGS
CMGW
CNMI
CGMR
GMR
CGSN
CSCS
CMSS
CNUM
CGATT
CGDATA
CGDCONT
CGEREP
CGPADDR
CGQREQ
CGQMIN
CGREG
CGSMS
CGCLASS
CR
DS
IFC

Posted by: RedDiablo

GD87 Has logic of work of AT+CMEPBR command, as GD75. X70 - works completely in another way. See my log of work HyperTerminal:
==================================
at+cpbs=?
+CPBS: ("SM","FD")

OK
at+cpbs?
+CPBS: "SM",35,150

OK
at+cmepbr=?
+CMEPBR: (1-500),40,16,80

OK
at+cmepbr?
+CMEPBR: "ME",27,500

OK
at+cmepbr=1
+CMEPBR: 1,"+380......",145,"20=","\1A8@?8G52","+380.......",14
5,"+380.......",145,"xxxxx@xxxxx.net.ua","",,""

OK
at+cpbr=1
+CPBR: 1,"7711",129,"!5@28A"

OK
==========================

Posted by: amod

hi,i am really thankfull for ur so much help.please one more small question :
we are using this sevice name for connection with IR port.

sockaddr_irda address = {AF_IRDA,0,0,0,0,"IrDA:IrCOMM"};

are u using the same one or using bluetoth for the service.
Thank u.