vB Easy Archive - Sorry Guys...

Pages: 1

Sorry Guys...
(Click here to view the original thread with full colors/images)

Posted by: fishbrains

Alright I am sorry to do it to you but I usually can always figure out stuff and never have to ask. But this is getting me really frustrated...

All of the drivers are setup and the port is on COM3. The settings in bitpim say "This port is likely to be your phone." (note: I have tried all different ports but all of the same result) When i try to get data this is the error i get:

19:28:41.921 COM3: Opening port COM3, 115200 baud, timeout 3.000000, hardwareflow 0, softwareflow 0
19:28:41.921 COM3: Open of comm port suceeded
19:28:41.937 LG-VX6000: Attempting to contact phone
19:28:41.937 LG-VX6000: Retrieving fundamental phone information
19:28:41.937 LG-VX6000: Phone serial number
19:28:41.937 LG-VX6000: Getting file contents 'nvm/$SYS.ESN'
19:28:44.937 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
19:28:44.937 COM3: Changed port speed to 38400
19:28:48.437 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
19:28:48.437 COM3: Changed port speed to 115200
19:28:51.937 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
19:28:51.937 COM3: Changed port speed to 115200
19:28:55.437 LG-VX6000: No response to setting QCDMG mode
19:28:55.437 COM3: Changed port speed to 19200
19:28:58.937 LG-VX6000: No response to setting QCDMG mode
19:28:58.937 COM3: Port speed 230400 not supported
19:29:01.937 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
19:29:04.937 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read
19:29:04.937 Error: Device needs attention - LG-VX6000 on COM3
LG-VX6000 on COM3: The phone is not responding while transitioning mode from none to brew.

Please i really need an answer, Even if you dont know an answer to this problem post back w/ some suggestions... Thanks alot.

Posted by: fishbrains

bump.....

Posted by: bkillion

I had the same problem. Try shutting down and removing the battery. Leave it out for about a minute. Power up and it should work.

Posted by: Bob the Printer

My VX6000 is comm6 with Win XP home... That's using a Susteen usb/serial cable with bitpim.

Posted by: stinsoarVX6K

yea make sure that bitpim says your phone is on COM3 (you know click browse next to the port, and see which one says your phone is installed on it), my phone also is on COM6, and that seems to be the typical COM from what I have seen in this forum.

I included a screenshot of what my COM settings are, thats what you are looking for to make sure your phone really is on the right COM port.

Posted by: stinsoarVX6K

Sorry the file was too big to attach, so click the link to check out my COM setup. I think you will find when you get the right COM port, your's will look the same. Hope this helps.

http://home.rochester.rr.com/stinsoar/com6settings.jpg