vB Easy Archive - How do I access internet with T3 via T610

Pages: 1

How do I access internet with T3 via T610
(Click here to view the original thread with full colors/images)

Posted by: mmz25

I'm able to pair my T3 with T610 using BT . I have my t610 set for wap access and it works fine . Also I can connect to the internet via laptop .
Can anyone give me the settings for a) Connection b)network
for T-mobile . or link to a thread where it is already discussed ( made a search could not find one )

Thanks

Posted by: hotweiss

Have you downloaded the phone link update?

http://www.palmone.com/us/support/d.../phonelink.html

And make sure you have these settings:

Connection
1. Choose T610 (if that isn't available, then make a new one) and go under Edit
2. Connect to: Phone
3. Via: Bluetooth
4. Device: T610 (or whatever BT phone you have)
5. Model: Sony-E. T610 (or whatever BT phone you have)
6. Under Details, set the speed (mine works with 57,600 bps)
7. Init String: &FV1E0X1 (that's a zero and not a letter O).
8. Click OK twice and Done.

Network
1. Make a NEW Service and name it something like "Free GPRS"
2. User Name: [just leave blank]
3. Password: [just leave blank as well]
4. Connection: T610
5. Phone: *99***1#
6. Under Details, Connection type: PPP
7. Idle timeout: [whatever setting you want]
8. Query DNS: checked
9. IP Address: Automatic is checked

Posted by: mmz25

Thanks for the Info .

But when i use web PRO 3.0.1a browser i get the following error messages
a) If DNS setting is checked : " No DNS Servers were specified .Please check that your network settings are correct and try again [Comm 9]
b) If I specify the DNS settings : "DNS lookup timed out [Comm. 8]

Posted by: hotweiss

Make sure that in your network preference it is set to Idle = Never. BTW, did you install the new drivers?

Posted by: mmz25

I tried all the settings you gave and also installed the updated drivers but now i'm getting PPP timeout error "0x1231" . Also could you tell me what is in the script that you are using .
Thanks in advance..

Posted by: hotweiss

Try one of these 2 sripts:

Under prefs/network select your Bluetooth to [PC] connection (which you will have made), then go to details/script and create the following script:

SEND CR
DELAY 1
SEND CLIENT
WAITFOR CLIENTSERVER
END

You can also try this one:

Send: CLIENT
Send: CLIENT
Wait for: CLIENTSERVER
END

After this I'm out of ideas, except for one. Try turning off the proxy server in Web Pro 3.01...

Try going through this guide:
http://www.palmone.com/us/support/h...oth_pairing.pdf

Posted by: mmz25

Thanks for all the help.. I'm now able to connect and i'm replying thru T3..

Posted by: hotweiss

Glad to help, but out of curiousity, what fixed it?

Posted by: mmz25

the configuration that worked for me is as follows:

Connection::
Name : LAN T610
Connect to : Local Network
Via : Bluetooth
Device : T610
Details:::
Speed:57,600 bps
Flow Ctl: Automatic
OK OK Done

Network::
Service: TGPRS
username: voicestream
Password: <blank>
Connection: LAN T610
Details:::
Connection type:PPP
Idle timeout: never
Query DNS :checked
IP Address : Automatic

Script ::::
Send: AT&FV1E0X1
Send CR:
Send CR:
Send : AT+CGDCONT=1,IP,internet2.voicestream.com
Send CR:
Send: ATDT*99***1#
Send CR:
Wait For: CONNECT
End:
OK OK
Connect........................................