vB Easy Archive - quick questions re: x70

Pages: 1

quick questions re: x70
(Click here to view the original thread with full colors/images)

Posted by: GT-[R]

nobody checks the pana forum, and the stuff is hard to search for so some quick answers would be appreciated

how to convert midi's to mmfs?
how to delete the predefined stuff (pics and ringtones)
how to upgrade firmwire? what program/cable to use?

thanks

somebody should make a sticky of this stuff at least...

Posted by: nickoli

Quote:

how to convert midi's to mmfs?
how to delete the predefined stuff (pics and ringtones)

The software on the CD that comes with the phone can do this for you, though X70 will play MIDI files.

You can't delete the stuff that comes with the phone, normally. With a data cable for flashing it, you might be able to format the memory, and you'll probably lose them if you do flash it.

Posted by: allen7

You are not searching hard enough

To flash X70 is very easy, just buy a USB cable for X70 off eBay or any place. The one I use is MA-8320P but other should work too as long as you have the driver for it.

1. Install driver for the USB cable.

2. Go to PC's Device Manager and find out which COM port the USB cable is assigned to and set the baud rate to 19200.

3. Start WinMoDo (make sure it's for X70), go to SETTINGS and change the COM Port and BAUD Rate according to your USB cable.

4. There are three boxes on the left: CUST, LP, CODE in green. If you just want to flash FW, clicK on CUST and LP so they becomes N/A and use the browse bottom to locate the A30 FW in your hard drive. Do the same for LP if you want to flash a Language Pack.

5. Turn off your phone then connect it to the USB cable (MAKE SURE YOUR PHONE BATTERY IS FULLY CHARGED).

6. Click Start download then press power buttom once. You should see activity in Progress Window and Time starts counting. Just sit back, relax and wait for it's completion.

It takes about 90 minutes for me to update the FW and language pack, so make sure your computer is stable and phone battery is fully charged.

When WinMoDo shows "Download completed successfully", just unplug the phone from USB cable.

To verify your new FW, turn on the phone and press *#9999# when you see the wallpaper. It should show

2DCBGAX70A30-30
LPH-00068
23/01/04 13:47:19

Not too hard is it?

Posted by: GT-[R]

yeah somebody answewerd my previous thread already thx

Posted by: GT-[R]

in my other thread the guy said to use cb2000 afterwards... do i have to?

Posted by: allen7

unless you want to change the language.

I just use WinMoDo for FW and language pack, works perfectly.

Posted by: Pilchard

Hey!

Just checking, is the above procedure the same for updating the customision pack?

Just make the other two sections red I assume, and do the rest the same?

Thanks, Richard

Posted by: allen7

Yes.

Quote:

Originally posted by Pilchard
Hey!

Just checking, is the above procedure the same for updating the customision pack?

Just make the other two sections red I assume, and do the rest the same?

Thanks, Richard

Posted by: Pilchard

Thanks

Posted by: fredixxx

Quote:

Originally posted by allen7
You are not searching hard enough

To flash X70 is very easy, just buy a USB cable for X70 off eBay or any place. The one I use is MA-8320P but other should work too as long as you have the driver for it.

1. Install driver for the USB cable.

2. Go to PC's Device Manager and find out which COM port the USB cable is assigned to and set the baud rate to 19200.

3. Start WinMoDo (make sure it's for X70), go to SETTINGS and change the COM Port and BAUD Rate according to your USB cable.

4. There are three boxes on the left: CUST, LP, CODE in green. If you just want to flash FW, clicK on CUST and LP so they becomes N/A and use the browse bottom to locate the A30 FW in your hard drive. Do the same for LP if you want to flash a Language Pack.

5. Turn off your phone then connect it to the USB cable (MAKE SURE YOUR PHONE BATTERY IS FULLY CHARGED).

6. Click Start download then press power buttom once. You should see activity in Progress Window and Time starts counting. Just sit back, relax and wait for it's completion.

It takes about 90 minutes for me to update the FW and language pack, so make sure your computer is stable and phone battery is fully charged.

When WinMoDo shows "Download completed successfully", just unplug the phone from USB cable.

To verify your new FW, turn on the phone and press *#9999# when you see the wallpaper. It should show

2DCBGAX70A30-30
LPH-00068
23/01/04 13:47:19

Not too hard is it?

I flash the langpack, but it stop halfway (finish flashing the firmware) ..... then i can not ON my handphone ... what'd i do?

vBulletin Copyright ©2000 - 2008, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2008 - Created by Stefan "Xenon" Kaeser