vB Easy Archive - can't hear me after Flash/Flex

Pages: 1

can't hear me after Flash/Flex
(Click here to view the original thread with full colors/images)

Posted by: STiGuy04

I'm running Flex - SE6446AXXF1148 and Firmware - TRIPLETS_G_0B.09.45R on my V600. On some phone calls I send or receive I can hear the other person, but they can't hear me. What's the deal? What's the latest Firmware and flex out there?

Posted by: Himself

Quote:

Originally posted by STiGuy04
I'm running Flex - SE6446AXXF1148 and Firmware - TRIPLETS_G_0B.09.45R on my V600. On some phone calls I send or receive I can hear the other person, but they can't hear me. What's the deal? What's the latest Firmware and flex out there?

Is that all you did, or did you play with seems or your gain_table as well??
You can also back up your stuff and flex with the F9 flex as well, I found it to be way more to my liking then the F8 you have going there.
The 45R or 4AR flashes are fine.

Posted by: STiGuy04

it happened after I flashed and flexed. I messed with some seems and the gain table afterwards and it's still doing it. Is there any advantage to running GI9V600000AA0E9?

Posted by: Himself

Quote:

Originally posted by STiGuy04
it happened after I flashed and flexed. I messed with some seems and the gain table afterwards and it's still doing it. Is there any advantage to running GI9V600000AA0E9?

Restore your backup of your gaintable, or use seemplayer to generate one. Sure you can use the engineering flex if you want.
As to advantage, guess it just depends if you want the engineering menu etc, I never bothered with it myself, but there are quite a few threads about it.

Posted by: STiGuy04

Still have the same issue. I flexed with SE645...F9 and kept the Triplets 9.45R I used the 9.45R reflash. Didn't mess with gain table or anything this time. Any suggestions?

*bump*