Google
 
Web www.howardforums.com
Pages: 1 2

Free WAP tutorials -- Read before posting questions

(Click here to view the original thread with full colors/images)

Posted by: mean2u

Ok, 2 days of searching and I found the answer.
First, to get in to the service menu of the phone you gotta do this:
923885 right (joystick) will enter long programming...to check lock code, security code, wap settings and couple other things.

It will take you to the NAM programing Menu
Select #5 WAP Params.
Pick the Gateway (1,2 or 3) you desire to edit
WAP menu is very self explainatory:
Primary IP: use IP for EDG or WAPtunnel
Secondary IP: same as Primary IP
Home URL: is your home page which could be edited later or you could set it up now (Google, yahoo, etc.)
Port:9203 (secure port)
Bearers: leave that option alone
Linger timer: leave this option alone
You are done!

P.S.
Here is the codes to get in to the service menu and test mode of the SE T61c (use them at your own risk, coz I only tried the one above)

987 right (on the joystick) or menu will enter NAM programming
923885 right (or menu) will enter long programming...to check lock code, security code, couple other things
904090 right (or menu) will enter field test mode


Posted by: frail

FREE WAP FOR LGVX4400/VX6000

In this tutorial I'll run through how to set it up using WAPTunnel's gateway. You can use any other gateway you wish, such as 3AM or EDG, just replace the WAPTunnel IP and Port with the respective ones for the other gateways. Okay, here we go.

Here's the IP and Port you need for WAPTunnel: IP=207.232.99.109 Port=9201

For other portals look here: http://directory.google.com/Top/Com...ta/WAP/Portals/

STEP 1 - Go to MENU then 0 . At that Service Code prompt enter 000000. This will allow you access to the service menu. Then press 9, this will take you into the WAP settings.

STEP 2- For the new service, use WAP Proxy 2. Enter 1 for IP setting, then 4 this will take you to Link2-IP1. For Link2-IP1 enter 207.232.99.109. Press OK.

STEP 3 - Press 2 for Port Setting. Then press 4 for Link2-Port1 and then enter 9201. Then press OK.

STEP 4 - Press the END key to get back to the standby screen.

STEP 5 - Start your web browser. NOTE=It will not initially work since you are no longer using Verizon's service to get on the web. Don't worry about it. After you've started your browser while it is trying to connect PRESS AND HOLD THE ZERO KEY. This will take you into the browser menu.

STEP 6 - Once in the browser menu, press 6 for Advanced. Then 2 for homepage. For a homepage you can enter http://www.google.com/wml

STEP 7 - Go back to Advanced. Then press 3 for Set WAP Proxy and switch to Proxy #2. After this you may either be prompted for a homepage or be sent to Openwave's homepage. When this happens, go back and repeat STEP 6.

That's it. Should work. You can also build your own homepage and incorporate links onto it for other places on the web you'd like to visit. But I have no experience with that, so you're on your own.
The following link will help you with setting up a homepage: http://www.rogerbinns.com/vx4400/vx...tml#ownhomepage

One last note: I pulled all this information from rogerbinns VX4400 FAQ and tried to break it down into an easy step by step process to avoid confusion.

For those who've asked to speak to me over AIM about this, everything in this tutorial is exactly what I'd tell you anyway, so if you have any additional questions about this, please post them in this thread.


Posted by: Dust N Bones

I also found these step by step directions in a post from the LG Forum. Not that there's anything wrong with your instructions Frail, I just thought I'd give everyone another view. Hope I'm not being disrespectful.

Posted by PhoneGeek
Lg Forum:
http://www.howardforums.com/showthr...threadid=122199

This is what i did for mine:

1. press menu -> 0 -> 000000 (should take u to the service menu)
2. then press 9 (wap setting)
3. press 6 (reset browser) [this will reboot ur phone]
4. repeat steps 1 and 2
5. press 1 (IP setting)
6. press 4 (link 2 ip 1)
7. enter 207.232.099.109
8. now go back to Wap setting after ur done entering the ip
9. then go to port setting
10. go to link 2 port 1 enter 9201
11. click end after u entered everything
12. now start ur browser. it should say network fail etc.. when it tries to connect.
13. then u hold 0
14. should take u to the browser setup
15. go to advance and choose the proxy to be 2
16. then set the homepage of ur choice and u should be done.

alrighty.. see if that works..


Posted by: DroppedD

frail- hope you don't mind - i used your post as a source for the VX6000 Cellar's Guide to Free WAP for The VX6000 Cellar. Thanks for the post; it's been really helpful.


Posted by: SnowSurfer

Guide to getting free wap on the lg tm-510

1. Go to menu.
2. Hit 3 to go to the system menu.
3. Hit 0, Enter Service Code should appear on screen.
4. 000000 is the code to enter the service section.
5. Hit 6 "Wap Setting".
6. Write down the ip in Ip Setting Link 1-1 incase you want to go back to it.
7. For Ip Setting Link 1-1 input the ip that you want to use for free wap (i used the 1-1 slots because I couldn't figure out how to set the 2nd ip settings as default).
8. For Portsetting link 1-1 port write down the port incase you want to use it again (9203 on my phone).
9. Input the port for the free wap server.
10. Ok out of those screens and hold the zero key.
11 You may be asked to enable security which is fine.
12. Once you are on the web hold zero again to bring up the web menu where you can set up your prefrences and homepage.

hope this helps, i know the tm-510 is an older phone but a lot of people still have one.


Posted by: atlantabriguy

<from brewbackups.com>

Free WAP on a530

1. Press Menu
2. Press 4
3. Press 0
4. USER LOCK = Last four of your tel number.
5. select gateway/ press 1
6. select address/ press 1
7. select address 1/ press 1
8. enter 193.95.167.178
9. press save at end then hit clr
10. press clear agian
11. select port/ press 2
12 select port1/ press 1
13. make port 1 9203
14. press save.
15. press the red END button.
16. press the internet button (right of get it now)
17. set your homepage
18. off you go!


*** if it doesnt work, repeat process and....

Choose "Address 1" and type in 207.232.99.109
Choose "Port 1" and type in 9201

This is free of charge, HOWEVER IT DOES USE PEAK MINS ON PEAK TIMES, so if you have free N&W, use it off-peak, it can be totally free.


Posted by: frail

Info on 3AM and EDG gateway setup:

http://www.howardforums.com/showthr...threadid=133847


Posted by: frail

Menu->Settings->Browser Setup->[New Entry]

For the name you can put Waptunnel or whatever you'd like

For homepage you can put something like http://wap.oa.yahoo.com or another WAP page of your choosing.

For WAP IP 1 put 207.232.99.109 (this is for Waptunnel)
For WAP Port 1 put 9201

Leave username and password blank.
Speed is 14.4

You shouldn't have to mess with any other settings.


Posted by: geeja

on v60c, have to use menu + 0 + 73887 (setup) + * + security code to get into browser setup


Posted by: juju1219

Will this charge me for using it or does it just take away from airtime? thanks


Posted by: frail

Quote:
Originally posted by juju1219
Will this charge me for using it or does it just take away from airtime? thanks


Just airtime.


Posted by: zzz

The info at this site really rocks, thanks to all who've posted.


Posted by: skarplug

Is there away to get the "charges will apply" message to dissapear on the VX6000?


Posted by: intensegrafx

Ok Great I am using yahoo for a wap, Now I am at the main page where it says sign in etc..
Now what button do I select to enter a URL??


Posted by: lyric911

Quote:
Originally posted by frail
quote:
--------------------------------------------------------------------------------
Originally posted by juju1219
Will this charge me for using it or does it just take away from airtime? thanks
--------------------------------------------------------------------------------



Just airtime.


so if it is a night/weekend it would be completely free?


Posted by: sp_ork

After:
STEP 6 - Once in the browser menu, press 6 for Advanced. Then 2 for homepage. For a homepage you can enter http://www.google.com/wml

I enter my home page, and then it says something about sending a security code, I press ok and then it fails and I have to re-enter the homepage.

Has anyone else experienced this?

Can you tell me what I'm doing wrong?


Posted by: Phusion49

Quote:
Originally posted by sp_ork
After:
STEP 6 - Once in the browser menu, press 6 for Advanced. Then 2 for homepage. For a homepage you can enter http://www.google.com/wml

I enter my home page, and then it says something about sending a security code, I press ok and then it fails and I have to re-enter the homepage.

Has anyone else experienced this?

Can you tell me what I'm doing wrong?


Ok, well I dont own this phone but yesterday I set up my friends VX4400 and it took a while but it worked. The one thing that I would recommend is that to make sure that all the 0s are erased where you put in the IP. You need to put the IP address on the first line and then follow the rest of the tutorial. I did this and it worked. So hopefully this will be of some help to you.

PS Can anyone please answer the question about using this during night and weekends. I would also like to know if there are any charges related to using this such as a data transfer charge. I ask cause I dont want my friend to get himself a nice hefty bill cause of messing around with such a wonderful method of getting free WAP.


Posted by: Yayoface

hey i followed all the directions precisely but i get an error message i havent seen anyone else post for the vx 60000
"the resource type ' text/html' is not present in the client acceptable media types set" anyone know whats causeing this message to come up? it wont even let me go anywhere but the main page of shockware the generic homepage the same message comes up when i click "cool links" on the site help me


Posted by: frail

Quote:
Originally posted by Phusion49
PS Can anyone please answer the question about using this during night and weekends. I would also like to know if there are any charges related to using this such as a data transfer charge. I ask cause I dont want my friend to get himself a nice hefty bill cause of messing around with such a wonderful method of getting free WAP.


There are no data transfer chargers and it is unlimited during nights and weekends. It's billed the same way as voice calls. Peak calls are taken out of your peak allowance, off-peak calls are taken out of night and weekend allowance.


Posted by: Trazzer

Can anyone verify if the wap will work on the T730? I had wap on my T720 software, now with the T730 soft, I can't get WAP! Any help please!


Posted by: BigFlavor

Quote:
Originally posted by skarplug
Is there away to get the "charges will apply" message to dissapear on the VX6000?


menu>6>3>1>"None"

Quote:
Originally posted by intensegrafx
Ok Great I am using yahoo for a wap, Now I am at the main page where it says sign in etc..
Now what button do I select to enter a URL??

try setting up a home page at tagtag.com

Quote:
Originally posted by lyric911
so if it is a night/weekend it would be completely free?

yes, verified for two months.

Quote:
Originally posted by Phusion49
I would also like to know if there are any charges related to using this such as a data transfer charge.

Nope, it's just like airtime, came as talking. verified for two months.


Posted by: Trazzer

Okay, now WAP won't work on my friend's phone either! Is it still working? If so, give out some new WAP ID's?


Posted by: BigFlavor

Quote:
Originally posted by Trazzer
Okay, now WAP won't work on my friend's phone either! Is it still working? If so, give out some new WAP ID's?

wap will work on your phone, if you pay for the service... otherwise go to one of many wap tutorials. i've compiled them, and added running your own server.
two tore ey ole


Posted by: BigFlavor

hello,
does anyone know of a proxy server that supports a secure connection?

thanks,
matt


Posted by: drFUNK

Have the 3am labs or EDG gateway been working for anyone lately? I've noticed that my phone cannot connect to either, but will connect to waptunnel perfectly.


Posted by: rodeknyt

I followed the instructions for the a530. Seemed to work, but when I first tried to connect it said something about setting up a security key. I didn't say Yes to that because I didn't know if that would somehow start a $4.99 per month charge.

Is it safe to go ahead and give the okey doke to the security key prompt?


Posted by: atlantabriguy

Yes, you need to go ahead and say yes to the security key. You will not get charged the mobile web fee, only airtime, if applicable, when you are using the gateway shown here.


Posted by: CEOMB

Using a v60i

the screen says this after connecting to mobile.msn.com

.NET Passport
Sign-in


I cant get pass this screen; if I push the down arrow, it trys to log in, invaild cmd

It comes up with a box, I type in my login name hit next, another box come up, I type in my password, hit submit

invaild cmd

anyone seen this mess?


Posted by: alky

I followed the instructions for the A530, but it gives me the same message as earlier. It says it's not enabled. I know it's probably a stupid question, but how do I enable it?


Posted by: Trazzer

I wish that WAP would work period for me. I have been using WAP for the past 5 months or so now, and now all of a sudden, it doesn't work. My friend's phone, his doesn't connect either. Anything happening in the rest of the world? I'm in SoCal.


Posted by: Caz

ive set up my WAPtunnel and already input wap.google.com as my homepage thing yet i want t ochange it now how to i go about that?


Posted by: juney

hello everybody,

Whan I try to get the free wap on my LG VX6000, it tells me that security is not enabled so I enable it and I get the security error:key not recoginezed. Can somebody please tell me what im doing wrong.

Thanks


Posted by: cg924

Have you set up everything on you phone like the 2nd post of this thread explains?


Posted by: juney

Quote:
Originally posted by cg924
Have you set up everything on you phone like the 2nd post of this thread explains?


Yes I did everything like post 2 explains.
Come to think of it do you have to already have internet activated on your phone before you can do those steps. When I got my phone I got it without web access so is that why its not working in the first place?


Posted by: mrwizard71

Does anyone know how to set up free WAP on the moto V120c. My buddy has this phone and I have searched for days and days to find it This is how I feel I have looked for days and days on end. Someone help plz.



mRwIzArD


Posted by: BigFlavor

Quote:
Originally posted by mrwizard71
Does anyone know how to set up free WAP on the moto V120c. My buddy has this phone and I have searched for days and days to find it This is how I feel I have looked for days and days on end. Someone help plz.
.mRwIzArD



yo,

my girlfriend has one, i had set it up; but i'd rather give you a step-by-step on it later.

but if you want to figure it out on your own, (i just found...) here's how to get into the service menu on motorolas:

menu + 073887* (you've got to hit the 073887* short and smoothly). When it prompts you to enter the service code, enter 000000.
then find browser setup; and add new, which will automatically set as default if i amn't mistaken.


Posted by: lmiller2000

Ok I've read the various tutorials on Wap tunnels and setting one up.
I've tryed to connect to a Wap Tunnel listed in a tutorial and I get a Security Key error which ask me if I want to set up my Security, I chose 'YES' and yes and it says invalid security key. So I assume I have no clue what I am doing, and yes I admitt this is my first WAP experience.
So here are my questions.
I need a Wap tunnel that utilizes the following Ip type
000.000.000.000:00000
I tryed a 000.000.00.000:0000 ip but my phone wont let me enter it.
I also would appreciate a step by step if anyone has time.
Im not sure how i determine the ip for a wap site, do i just use a dns lookup?
Any help for a newb to not only waps but verizon in general would be most appreciated.
Thank you


Posted by: hymy

Waptunnel doesn't support encryption, so if your getting a security key request, then you have set your phone to use a secure port.


You should configure it to use a non secure port.


Posted by: aoLhaTer

Quote:
Originally posted by BigFlavor
menu>6>3>1>"None"

anything for the 4400 that will remove the "charges will apply" screen?


Posted by: MROZ

I'm real new to this, just set up my phone for this today but I got the message to quit coming up on the 4400 by entering

menu
4-3-1-none-ok


Posted by: aoLhaTer

Quote:
Originally posted by MROZ
I'm real new to this, just set up my phone for this today but I got the message to quit coming up on the 4400 by entering

menu
4-3-1-none-ok

worked like a charm, thanks


Posted by: ironmaiden

Just to echo lmiller2000's request, is there anyone out there that can help those of us with a Nokia 3589 in setting up a WAP tunnel?

Anyone at all? Pleeaassee.... We would be eternally grateful


Posted by: Trazzer

Anyone with a T730/720 able to use WAP? It won't even try and go through with me! PLEASE HELP!


Posted by: ironmaiden

Quote:
Originally posted by ironmaiden
Just to echo lmiller2000's request, is there anyone out there that can help those of us with a Nokia 3589 in setting up a WAP tunnel?

Anyone at all? Pleeaassee.... We would be eternally grateful



I ask again if anyone can help those of us with the 3589i or perhapes direct us to a website that can get us started. I have searched the web using google without luck. I have Verizon's mobile web which is okay but would like to download some wallpapers and ringtones.

Thanks in advance.



Posted by: ddecjc

Quote:
Originally posted by ironmaiden
I have Verizon's mobile web which is okay but would like to download some wallpapers and ringtones.


I may be mistaken, but I thought that I've been reading that we cannot save downloaded files whether we're using Verizon's mobile web or free WAP on a Verizon phone.


Posted by: naturefreak85

i used to use the web on a vx3100 and now i have a timeport 270C so i can have bluetooth, but before i got the timeport the wap acted strangely, i tried erriccson developer wap and waptunnel and neither work anymore, did verizon block it? if so and even if not, how do i set up the timeport 270C if it is at all possible


Posted by: julesj66

Greetings - I've followed all of the instructions setting up the WAP on my LGVX6000 - but now when I launch browser & say ok, it brings up "Openwave" screen with a listing (ie..cool sites, etc) ... I press & hold 0 to go to the browser menu - 6 for advanced - 2 homepage .... I want my homepage to be http://wap.oa.yahoo.com (I think ... all I want to do is check my yahoo mail)...so I go and change the openwave URL to the new one ... it tries to connect & then times out .... 1st quest: is there a way to set it to save the yahoo URL so I don't have to keep replacing the openwave 1 w/it? 2) is it always going to time out - have I done something completely wrong? 3) how do I get it to automatically connect to my homepage (which I want to be yahoo) when I launch the browser?! Help please!


Posted by: GadgetTravel

Im sorry, Im being really dense about this. I have read these threads, I have done searches here and on the web and I still cant figure this out. I have a V60c that was upgraded to V60i firmware. I dont get an option under settings for browser settings. When I put in the number code nothing happens. I read something about some of the browsers being locked, but under application lock it doesnt seem to be. Any suggestions on what to try will be much appreciated.


Posted by: frail

Quote:
Originally posted by GadgetTravel
Im sorry, Im being really dense about this. I have read these threads, I have done searches here and on the web and I still cant figure this out. I have a V60c that was upgraded to V60i firmware. I dont get an option under settings for browser settings. When I put in the number code nothing happens. I read something about some of the browsers being locked, but under application lock it doesnt seem to be. Any suggestions on what to try will be much appreciated.


For the v60c, you have to press Menu then 073887* and enter the security code(000000) at the prompt to get into browser setup.


Posted by: GadgetTravel

Thanks. I tried that. I press menu, the release and enter 073887* and I am on the first menu entry point (says Recent Calls). I press menu and hold it and enter 073887* and at some point during the entry it says "Shortcut not allower for". The display of the error message seems timed from when I puch menu rather than dependent on what keys I subsequently enter. I think from a software standpoint this is a V60i now. Is that the same procedure? Thanks again for helping.


Posted by: naturefreak85

i also tried this for the motorola 270C and it doesnt work, i saw in a thread from a search that it should work but it doesnt, does anyone else have an idea?


Posted by: geeja

For the v60c, you have to press Menu then 073887* and enter the security code(000000) at the prompt to get into browser setup.

Don't hold the Menu key down, just press and release.
You have to do the whole sequence FAST, like less than a second between keypresses.


Posted by: GadgetTravel

Quote:
Originally posted by geeja
For the v60c, you have to press Menu then 073887* and enter the security code(000000) at the prompt to get into browser setup.

Don't hold the Menu key down, just press and release.
You have to do the whole sequence FAST, like less than a second between keypresses.


Wow, thanks. I had read it had to be fast but it has to be REALLY fast to work. I can get there now. I am getting a connection timed out but that could be from a few things. Im working on it now that I have the menu. One thing I noticed is that I didnt see a place to enter the connection speed like FRAIL said. Is that in the same menu set. Thanks again, making progress.


Posted by: rtlooker

every time i click "read" on yahoo mail when using the free wap i get bounced back to the home page. any one know how to fix this.


Posted by: naturefreak85

how do i set up the 3589i for free wap? i tried to enter the security settings with the codes 1-2-3-4-5 and 1-2-3-4 and both of them say code error, and these are the codes given by the manual? does anyone know what verizon may have changed the codes to?


Posted by: frail

Quote:
Originally posted by naturefreak85
how do i set up the 3589i for free wap? i tried to enter the security settings with the codes 1-2-3-4-5 and 1-2-3-4 and both of them say code error, and these are the codes given by the manual? does anyone know what verizon may have changed the codes to?


Try 000000


Posted by: naturefreak85

darn that doesnt work, ive tried so many combinations and none seem to work....... this is so annyoing why does verizon change the codes?


Posted by: frail

Quote:
Originally posted by naturefreak85
darn that doesnt work, ive tried so many combinations and none seem to work....... this is so annyoing why does verizon change the codes?


Try the last digits of your wireless number. The 3589i doesn't support a security code, only a lock code. Which should be the last 4 digits of your cell number unless you've changed it. The code I gave above is the MSL. You might need that to access the programming menu(*3001#12345#) which is where you'd need to go to setup the WAP service. You can't do that in the security menu.


Posted by: naturefreak85

Im happy that it worked.......but now i just have to figure out how to set up the free wap on the phone


Posted by: frail

Quote:
Originally posted by naturefreak85
Im happy that it worked.......but now i just have to figure out how to set up the free wap on the phone


Type in *3001#12345#

If prompted for a code enter your lock code(usually the last 4 of your number if you haven't changed it) or if that doesn't work try the MSL (000000 is default).

Select Server Address. Then Server 1 IP address. Write down the numbers currently in there in case you want to use Verizon's Mobile Web in the future and have to reconfigure it.

Then you'll have to enter the IP and Port of the free WAP gateway you want to use.

For WAPTunnel's gateway type this in: 207.232.99.109:9201
(207.232.99.109 is the IP and 9201 is the Port)

Then start the browser. Hit the power button briefly to bring up the Browser Menu. Select option 6 for Advanced then 2 for Homepage. Set a homepage like wap.oa.yahoo.com or some other page to your choosing or make a homepage at tagtag.com where you can place links to your favorite sites.

(note: I wrote this from memory as I don't have the phone with me. Feel free to make any corrections if there are mistakes or omissions)


Posted by: naturefreak85

frail....you are right on target as usual.....what would we do without you.....you always are on target and knowing.....this is so helpful....thank you so much no errors at all


Posted by: ghostdogg36

is there any downside to doing this.? Only had my vx6000 and don't want to mess things up.


Posted by: Soullous

The only downside is that there are not many sites that work with this, I guess because it doesn't support encryption. If you rely on the mobile web, then don't mess with it. If you just want to screw around with it without paying, then go ahead.

Does anybody have a list of good sites that work with the free wap service, BTW? I'm looking for sites mainly with local information, such as movie times, phone numbers, directions, etc... kinda like go2.com or mobile.msn.com, except I can't get either to work.


Posted by: Trazzer

wap.hollywood.com is awesome for movies! And http://www.tagtag.com is the best place to search for what you want. This has HUGE amounts of WAP sites!


Posted by: XtReMe23

I have a Samsung x427 and i was wondering if anyone knows how to configure waptunnel to work on my phone.

Thnx


Posted by: frail

Quote:
Originally posted by XtReMe23
I have a Samsung x427 and i was wondering if anyone knows how to configure waptunnel to work on my phone.

Thnx


This version of free WAP won't actually be free for you because your provider will still see that you're transfering Kb's and charge you accordingly for data. Not unless somehow you can have the phone use CSD vice GPRS.


Posted by: XtReMe23

So waptunnel doesn't work on grps?


Posted by: frail

Quote:
Originally posted by XtReMe23
So waptunnel doesn't work on grps?


Not sure about that. But even if you could get it to work, you'd still be paying for data.


Posted by: jdawson

How do I insert the "." when entering the URL in the V60s?
Jim


Quote:
Originally posted by frail
Menu->Settings->Browser Setup->[New Entry]

For the name you can put Waptunnel or whatever you'd like

For homepage you can put something like http://wap.oa.yahoo.com or another WAP page of your choosing.

For WAP IP 1 put 207.232.99.109 (this is for Waptunnel)
For WAP Port 1 put 9201

Leave username and password blank.
Speed is 14.4

You shouldn't have to mess with any other settings.



Posted by: XtReMe23

Quote:
Originally posted by frail
Not sure about that. But even if you could get it to work, you'd still be paying for data.


alright thnx


Posted by: cephraim

I'm paying for WAP access already.

Can I try out free WAP on my a530 without screwing up my paid?
ie: can both methods co-exist on this phone so I can compare/contrast before deciding whether I want to switch completely to free WAP?

Thanks,
Eph


Posted by: naturefreak85

from what i know...yes, you just need to enter it as a secondary ip config and use your browser to use the second one....im not sure how it works on the A530 but i am sure someone does, maybe frail


Posted by: acizurqpid

anyone able to successfully get a wap site to display movie times on a vx6000? if so...whick one? i've tried all w/o success.


Posted by: cephraim

OK, so I've got two WAP setups on my a530 now.
Paid WAP (Web Browsing) from Verizon and a WAP Tunnel to wap.oa.yahoo.com.

My side-by-side experience shows that the paid WAP is much faster and more reliable than the wap.oa.yahoo.com setup.

Has anyone found a wap tunnel setting (IP address and wap site) that's as fast as the paid WAP?

I know that would be like getting my cake and eating it, too, but, for the $5/mo, I'll keep paying for good performance if there isn't an equally performing config through tunneling.

Eph


Posted by: Staley8

for safety should I delete Link1-Ip1 from my settings if I'm on Verizon using a LG Vx6000 phone? In other words, could Verizon charge me the $4.99 to get their mobile web if I choose "ok" from my phone or is the mobile web thing something that you have to call and have turned on by a CSR at Verizon?


Posted by: naturefreak85

no they will not...because you do not have it on your plan.....it will just say enable security and if you try to enable security it will fail so you do not have to delete it


Posted by: rabbivj

I tried to use the EDG gateway, did they take it down or something? I pinged the IP and i got no response...


Posted by: Caz

ive been using my wap service for the last couple of months and all of a sudden i have not been able to get onto my wap at all. all i get is "network not available".

Is the wap server down?


Posted by: TyrantII

i get the same thing here in massachusetts, have they blocked outside wap gateways?




Posted by: s2kohio

Quote:
Originally posted by acizurqpid
anyone able to successfully get a wap site to display movie times on a vx6000? if so...whick one? i've tried all w/o success.


go2online.com has movie listings. I think it's pretty good. Not sure what their wap page is. Check out their website. I'm sure it's listed there.

Sorry I can't be better help. But go2online is on my wap gateway provider's web page so I don't know the url.

S2k


Posted by: Spud04

Anyone know how to do it on a a610?

edit: nevermind


Posted by: Devilish

Have anyone tried it on Virgin Mobile Slider phone (SE47) and they can connect. My phone is working fine on VZW but the WAP does not connect.

I keep getting Security is not Enable......... msg and when I click yes it starts sending >>>>>>>>>>>>> and after couple of minutes I get a msg saying "Data Server not avaialble".

Any Idea?

Thanks


Posted by: dasniper66

How do I override the WAP settings on the Samsung a610?

I tried with the instructions for the a530, but they didn't work at all.


Posted by: Kruzen

just glanced throug hthe thread and didn't see aything about the audi CDM8900


any help here?


Posted by: Pack

Don't know if you've seen this thread, but try this LINK for starters.


Posted by: peachmasta

First got to menu
second goto Mobile web
hit 0 when you are in the mobile web section of the sliding menu
you will be prompted for your lock code
(your last 4 digits of your mobile number unless you changed it)
You are know in web setup menu
hit 1 (gateway)
hit 1 (address)
hit 1 (address 1)
then soft key right to change

Now i don't have verizon mobile web so i changed A to the free wap Ip (207.232.99.109)

I tryed using (B) or (Address 2 A) But i got the security code error when i tryed to connect, and i can't find a proxy selection in the setup so i just replaced the verizon address and it worked.

After saving address hit back to Gateway menu
hit 2 (Port)

Then same thing as with the address i replaced the verizon port under port A to the free wap port one (9201)

Once that is setup start your mni browser and you will be prompted for a hompage (www.google.com/wml) enter the one you want and thats it.


Posted by: jordankickz

Any help for T720? When I try to get on it says security not enabled and then I get an error when enabling it? What do I have to change in the settings?

If I was to pay the $4.99/month for WAP, would I be able to download ringtones and wallpapers from tagtag for free?


Posted by: peachmasta

if you want to keep the verizon ip and free one, go to settings by holding the left soft key while in browser and go to advanced, then wap proxy.


Posted by: jordankickz

Are there ANY sites I can go to for ringtones or wallpapers w/ free wap?


Posted by: a530demon

Has anyone yet found the settings for free wap w/ the 4500?


Posted by: frail

Quote:
Originally posted by a530demon
Has anyone yet found the settings for free wap w/ the 4500?


Have you tried doing it the same way as it's done for the VX4400 or 6000?


Posted by: a530demon

theres only one proxy on the 4500, will it still work


Posted by: frail

Quote:
Originally posted by a530demon
theres only one proxy on the 4500, will it still work


I don't see why not. I guess you could give it a shot and see if it works. But I would write down the info that's currently in there in case you ever want to use the paid WAP.


Posted by: a530demon

Ill try it out later tonite and tell u if it works, gotta save the minutes man. "Dont call no phone a' mine, unless its after 9" - a530demon


Posted by: XxAzNxX

Quote:
Originally posted by jordankickz
Any help for T720? When I try to get on it says security not enabled and then I get an error when enabling it? What do I have to change in the settings?

If I was to pay the $4.99/month for WAP, would I be able to download ringtones and wallpapers from tagtag for free?


sorriee but no
verizon blocked all downloads from WAP
and instead tell you to download from GIN
but i think the prices on GIN are bs
i was pissed when i found out that you couldnt download anything from WAP


Posted by: a530demon

Im not sure wat to do now about the wap. I followed the walkthrough for the 4400/6000 and it will take me to the menu but it will not let me type in a homepg.


Posted by: okayfine

I folllowed the instructions for my A530 and it's not working for both servers. It asks me to enable security, then when I press yes, it displays "sending )))))" for a while, then it states that "server not responding".

Can someone tell me what the problem is?

Thanks.


Posted by: Epic1621

I just got this phone and i've looked throught this thread and have found nothing on it. Also i was wondering if anyone knew a way go have free interent or do u have to pay the money to have it?


Posted by: peachmasta

anyone else not able to use free wap at night sometimes?


Posted by: XxAzNxX

Quote:
Originally posted by Epic1621
I just got this phone and i've looked throught this thread and have found nothing on it. Also i was wondering if anyone knew a way go have free interent or do u have to pay the money to have it?


might wanna check the Audiovox forums...


Posted by: fishfuzz

Hopefully this isn't a repost - I searched for 270c settings and didn't find any.

Here's my working configuration w/waptunnel:

1) MENU + 073887 + *

2) Security code 000000

3) Browser Setup

4) [New Entry]

5) Name: Free (you can call it whatever you like)

6) Homepage: http://www.google.com/wml (or your favorite WAP page)

7) WAP IP 1: 207.232.099.109 (the leading zero will disappear, but it makes for easier entry)

8) WAP Port 1: 9201

9) Choose DONE

10) Scroll down to the new profile and press the MENU button

11) Select Set Default

12) Press END to return to the main screen

You should now be able to connect!


Posted by: afixus

Hi all.

For the last 3-4 days when using free wap with a530s I am
getting "Server is not responding" message.
It was working before..
How about the rest of you?
I used following combinations:
207.232.99.109 / 9201
193.95.167.178 / 9203
both give me the same result/message.

Thanks.


Posted by: Andy84094

Quote:
Originally posted by afixus
Hi all.

For the last 3-4 days when using free wap with a530s I am
getting "Server is not responding" message.
It was working before..
How about the rest of you?
I used following combinations:
207.232.99.109 / 9201
193.95.167.178 / 9203
both give me the same result/message.

Thanks.


Same here...the 207.232.099.109/9201 give me the "Server not Responding" message...anyone else still able to use free wap?? if so, how?

EDIT: Could Verizon have done something to prohibit us from accessing free wap???


Posted by: Andy84094

As you read above, I also had trouble accessing free wap....
here's one that works...just found it in another thread and it works for me
194.204.12.42, port 9201


Posted by: Craptain

I would prefer to not go half way around the globe to Estonia for my WAP needs. I'm really starting to miss WAPtunnel. Anyone else have anything that works better?


Posted by: jmoses020

i can get the free wap to work and get to the site but everytiem i go to tagtag.com and try to download a ringtone it says "invalid content type"


Posted by: XxAzNxX

WAP doesn't allow you to download ringtones, pictures etc. Verizon blocked it...they want you to use GIN instead...


Posted by: sdawg83

Hey, i read the post on setting up the WAP settings for the Samsung a530. After changing the IP address, I tried to use the web, and a message came up that said

"security is not enabled. Enabling security can take several minutes"

it only has a yes option, but when i choose this it says "sending" for awhile then it says the server cannot be reached. Is this an outdated site? what IP should i be using?


Thanks a ton guys.


Posted by: TtAudi703

Hey, I was reading through this how-to and several other ones, and this is what i got on my phone right now:

Name: Free
Homepage: http://www.google.com/wml
WAP IP 1: 207.232.099.109
WAP Port 1: 9201
Wap IP 2: 000.000.000.000
WAP Port 2: 9201
Conformation: Off (Hide)
Cahce Start-Up: On (Store)

Will this setting work on my Motorola T720/T730??

Thanks in advance!!


Posted by: absolutic

I am getting into this game a little late.

Please provide step-by-step instruction on how to use WAP with Verizon's T720 phone. Hopefully with the most current IP addresses. Thank you in advance


Posted by: mrod0717

I have a lg vx6000 and i am trying to use waptunnel using 207.232.99.109 port 9201 but it tells me that the server can not be found so can someone please help me and/or give me info on better gateways to use for my phone it will be gladly appreciated


Posted by: id4rox

heres working WAP ip and port. i just used it

IP: 193.113.200.195
Port: 9201

Does anyone know if verizon charges by the kb, or if they will charge me by airtime? First hand experience is appreciated


Posted by: frail

Quote:
Originally posted by id4rox
heres working WAP ip and port. i just used it

IP: 193.113.200.195
Port: 9201

Does anyone know if verizon charges by the kb, or if they will charge me by airtime? First hand experience is appreciated


Airtime only. Nights and weekends are free if you have unlimited nights and weekends.


Posted by: id4rox

Quote:
Originally posted by frail
Airtime only. Nights and weekends are free if you have unlimited nights and weekends.


Just like EN MOU, great now i can fool around until I bore of it. looks like my 90% unused minutes will get used some more!!


Posted by: id4rox

The ip i gave above works great but i cant change the homepage - it says feature not available? Grr, it's locked on to some co.uk homepage! Anyone know any american WAP servers to use with the ability to choose my own homepage? the one at waptunnel doesnt work


Posted by: mrod0717

thanks a bunvh for the ip address an port it works great and i love it thanx


Posted by: mrod0717

i have a lg vx6000 does anyone know where i can download free ring tones and wallpapers from on the mobile web it will be gladly appreciated


Posted by: id4rox

no. verizon doesnt allow you to download those from WAP. you need to start reading GAGIN threads to learn how to load apps on to your phone to get what you want.


Posted by: mrod0717

i would love to acces my aol mail and aim on the mobile web any suggestions


Posted by: skadoo323

i thought aim could be accessed by just typing the wap url for it?


Posted by: id4rox

I wish people would do a forum search, or atleast look at the thread topics on the first page. If you do this, 99% of the time you will find yoru answer. Ask yourself: "Am I the only one who could have possibly wondered/wanted to know/do this with my phone?".. If the answer is no, then most likely it has already been asked and answered here. Sorry to be blunt, but its true.

Here is what you want for AIM: http://www.howardforums.com/showthr...threadid=219183

You can search for info on your AOL mail.

Brian


Posted by: mrod0717

I would like to know ehat is the wap url for aim or aol. if any one knows any good wap sites please post them it will be gladley appreciated


Posted by: id4rox

Quote:
Originally posted by mrod0717
I would like to know ehat is the wap url for aim or aol. if any one knows any good wap sites please post them it will be gladley appreciated


Tell me you are joking and just trying to get me fired up. I just told you the wap url for aim in my last post!


Posted by: ionizer

ok I used the 193 IP and 9201 port recently posted
but then all i get is OPENWAVE'S page
1 Cool Sites (Doesnt work)
2
3
4
5
6

2-6 are junk, like "About us" "How to contact us" etc

nothing lets me enter my own address..

I tried hitting (and holding down) "0" when the openwave browser first comes up, but nothing happens

so where can I enter in my own urls? When im on the open wave page, all I can do is hit "ok" to their menu choices! arg!

i've read through every single post in this thread, but nothing about the a670 and how to enter your own url once you actually get on WAP (difficult enough)


Posted by: deadwrong03

Quote:
Originally posted by frail
FREE WAP FOR LGVX4400/VX6000

In this tutorial I'll run through how to set it up using WAPTunnel's gateway. You can use any other gateway you wish, such as 3AM or EDG, just replace the WAPTunnel IP and Port with the respective ones for the other gateways. Okay, here we go.

Here's the IP and Port you need for WAPTunnel: IP=207.232.99.109 Port=9201

For other portals look here: http://directory.google.com/Top/Com...ta/WAP/Portals/

STEP 1 - Go to MENU then 0 . At that Service Code prompt enter 000000. This will allow you access to the service menu. Then press 9, this will take you into the WAP settings.

STEP 2- For the new service, use WAP Proxy 2. Enter 1 for IP setting, then 4 this will take you to Link2-IP1. For Link2-IP1 enter 207.232.99.109. Press OK.

STEP 3 - Press 2 for Port Setting. Then press 4 for Link2-Port1 and then enter 9201. Then press OK.

STEP 4 - Press the END key to get back to the standby screen.

STEP 5 - Start your web browser. NOTE=It will not initially work since you are no longer using Verizon's service to get on the web. Don't worry about it. After you've started your browser while it is trying to connect PRESS AND HOLD THE ZERO KEY. This will take you into the browser menu.

STEP 6 - Once in the browser menu, press 6 for Advanced. Then 2 for homepage. For a homepage you can enter http://www.google.com/wml

STEP 7 - Go back to Advanced. Then press 3 for Set WAP Proxy and switch to Proxy #2. After this you may either be prompted for a homepage or be sent to Openwave's homepage. When this happens, go back and repeat STEP 6.

That's it. Should work. You can also build your own homepage and incorporate links onto it for other places on the web you'd like to visit. But I have no experience with that, so you're on your own.
The following link will help you with setting up a homepage: http://www.rogerbinns.com/vx4400/vx...tml#ownhomepage

One last note: I pulled all this information from rogerbinns VX4400 FAQ and tried to break it down into an easy step by step process to avoid confusion.

For those who've asked to speak to me over AIM about this, everything in this tutorial is exactly what I'd tell you anyway, and I'm pretty busy most of the time. All the information is here though. Hope this helps. If you have any questions about this, please post them in this thread.
ok im just gettin into this i tried all those wap portals and ips...they didnt work i jus wanna get one thing straight... i do this same process every time right? the only difference is the ip and port numbers right?


Posted by: jsluks

OK, I read everything and unfortunately, I am having trouble connecting to much via free wap. I have had some limited success with the 193.113 IP, but not able to connect on any type of regular basis, even with waptunnel (seems to be down), not too mention very difficult/unable tobookmark or type in my own URL.

Using the a670 and VZW.

Any help would be much appreciated!!!


Posted by: cadnyc

a530 WAP address?

has anyone managed to get the FREE WAP working on their a530? I can connect, but where do I insert the WAP address?


Posted by: BlueMuscles

Hi

I have the a530 and did everything and it worked then i tried it agin and now i keep getting the same message...

" internet service provider not enable"

What do i do?

BR


Posted by: cadnyc

try another set of WAP IP address


Posted by: BlueMuscles

Hi there,

I tried everyone I found and i still get the same message.

I wonder if i reactivate my phone on verizon website via my account will it reactivate it?

This is frustrating to say the least...

BR


Posted by: k4rupt

I tried all the good WAP servers (waptunnel etc.) on my samsung a650, but they all end up saying server not responding. Can someone help me?


Posted by: Gar10

Excuse me but I am new to this forum and don't know if this topic has been discussed here before or if it is the right place for this. But I have heard that Verizon is being sued for charging minutes when minutes are not being used and adding extra charges to bills. Does anyone know if this is true? If so, how do I sign up?


Posted by: rocksolid99

Please don't flame if I missed something, but I scanned through this thread and didn't see anything on the vx7000 and wap. Would it be the same as the 6k?

Thanks in advance.


Posted by: slantednet

I've gone through about 3 different wap ip's on my 4400 and they all return the same failure (Server not responding).

It's very possible that verizon could block certain IP's (like those to waptunnel) but are they? I was able to get the service to work using their $4.99 service, so I'm confident it's not the phone.

Has anyone been able to successfully access one of the free wap providers lately? (Like, as of tonight, for instance?)


Posted by: cadnyc

i'm experiencing the same problem lately. i cant connect on my a530. tried 3 wap ip's and still getting server not responding.


Posted by: theturbanator

anyone know how to do this for the a670, i tried the a530 way but the security key thing messes it up


Posted by: tigerjk1410

i would also like to know how to successfully set this up for the A670...doesnt seem to want to work.


Posted by: Andy84094

Hey,
is anyone still able to use Free Wap...I myself have been getting a "server not responding" error message for the past two weeks using various IP addresses that are in this treat and that previously worked.
Thanks,
Andy


Posted by: ginotech

i'm running my own WAP server, and it works fine. i hate WAP though.


Posted by: cadnyc

you hate wap and yet you have a wap server. how ironic....

Quote:
Originally posted by ginotech
i'm running my own WAP server, and it works fine. i hate WAP though.



Posted by: ADG

There are no replies to the inquires in this thread about the T-730. Does anyone know if there is a procedure for the t730? Thanks.


Posted by: royta

I was troubleshooting a WAP problem with my server and VX4400 this morning. From the "000000" WAP Settings, I chose option 6, "Reset Browser". This automatically rebooted my phone and reset all of the IP addresses for WAP to 000.000.000.000. It also defaulted the ports to 9203. So I input my IP address and changed the port to 9201. I tried to use WAP, but received the following message, "Internet service is not enabled". What's up with that?

Thanks. -Roy


Posted by: royta

one more thing - It doesn't even attempt to try connecting to the WAP server. It simply states "Internet service is not enabled". At least before, it would attempt to connect to the server.


Posted by: ginotech

Quote:
Originally posted by cadnyc
you hate wap and yet you have a wap server. how ironic....

no, it's really not. i can't get anything better-looking than WAP on my phone. if i could, i wouldn't use it.


Posted by: royta

Quote:
Originally posted by royta
I was troubleshooting a WAP problem with my server and VX4400 this morning. From the "000000" WAP Settings, I chose option 6, "Reset Browser". This automatically rebooted my phone and reset all of the IP addresses for WAP to 000.000.000.000. It also defaulted the ports to 9203. So I input my IP address and changed the port to 9201. I tried to use WAP, but received the following message, "Internet service is not enabled". What's up with that?

Thanks. -Roy


Well, I found out I have to have Link1-IP1, Link2-IP1, and Link3-IP1 populated with an IP address. I only populated Link1-IP1. I am still unable to connect to the server though. I scanned the IP address for an open port 9201, and it is certainly open. So, I'm not sure what the deal is. It worked fine when I had my 4500, but I don't recall if I ever got it to work again after swapping out to the 4400.





ginotech - You're right, it's not ironic at all. It's not much different than hating traffic, but owning a car.


Posted by: korn

Quote:
Originally posted by ginotech
i'm running my own WAP server, and it works fine. i hate WAP though.


what program are you using to do that?


Posted by: ginotech

the one that they use in the "WAP" guide in the lg forum. search is fun, fun for everyone.

http://www.howardforums.com/showthr...threadid=273744


Posted by: Daaz

Uhg, got everything to work, but, i cant seem to connect to anything... i'm trying www.goole.com/wml


and it just cant connect... im using proxy 2... the ip mentioned inthis thread... still.. nothing. uhg

edit: well, pinging the ip in post 2 solved that problem




Anyone know of any ip's that work right now?


Posted by: jabroni1m

Was wondering if anyone could answer this. If I follow these instructions someone sent me will it work for National Access on night and weekend or will it charge me data usage. I have a LG VX6000.

1. Change port speed to 230400, make sure phn is set to USB.
2. Connect phone to pc with usb cable.
3. Install drivers for USB Cable from download.
4. Use dial up networking to create the connection.
Use phone number #777, use 8181234567@vzw3g.com as user name if thats ur phn number and use vzw as password.
5. Connect and it should work fine.

I know this will work but what kind of charges will there be?


Posted by: ginotech

that isn't free WAP, that seems like you're using someone else's account. that seems like a bad topic for this forum, especially since you posted their password. i don't think whoever sent you that is very happy...


Posted by: royta

oh dear


Posted by: Daaz

Well, to update:

I desided to just run my own wap proxy.


I was tired today, and i kept using my private ip (to put into the phone) and it took me a good hour to figure out that i'm suposed to use the primary ip.



Hurrr :B


Posted by: jabroni1m

Why would someone use vzw as their password? And why would they share this information with me? I"m not going to use it just incase.

And if i'm using my phone number in there how could this be their acct.? Has anyone else connected like this?


Posted by: ginotech

so you posted your cell phone number on the internet?


Posted by: jabroni1m

NO, if you dial 8881234567 or whatever I put it doesn't dial to anyone.


Posted by: ginotech

okay, just making sure


Posted by: fishfuzz

*sigh* The information he posted was an _example_ number. It's not real.

Secondly, the password for the connection is vzw - for everyone. Makes no difference what your account password is.

I think the Rock would have something to say about these Jabroni.....


Posted by: ginotech

××××, i didn't even look at the number. nevermind!


Posted by: loud

yes ive tried all these awesome ideas you ppl have listed yhere. one question do i have to suscripe to mobile web to change wap setting and login cuz ive changed allsetting but it says "server not found" even with my own wml page. please heklp.. im on a vx6000


Posted by: thecynosureone

I did all the steps but what happens when i try to get access to the internet it says

" Network not respoding" or " Server not responding"

Im tryin to think of what i did wrong or what happend, but i did all the steps for the LG VX4400 and it isnt working, can someone help me with this please? Or show me a thread that has the same problem


Posted by: airkarol

What phone r u using?


Posted by: thecynosureone

lg vx4400


Posted by: airkarol

Instead of using WAPtunnel IP gateways, try using something like 3AM Labs, there are a lot of them out there.


Posted by: thecynosureone

what is a 3AM Lab and where can i get one at?


Posted by: airkarol

You can try sarching for WAP portals on google or something. I dont no their IP. I'm not using either of them.


Posted by: vols

i have free wap for my vx7000 but does anyone know how to get the Verizon Subscribe for $4.99 to go away?...


Posted by: ChuX

I just tried using wap on my VX-7000. I got to the yahoo wap site. But before it went to the Yahoo site, it showed the screen telling me to subscribe to mobile web. Does that mean I am only using up airtime minutes? I just want to make sure. I did not call CS to enable mobile web.


Posted by: airkarol

If you didnt use the hack, then you are being charged. If you used the hack, then it is normal for it to come up and you are only using airtime.


Posted by: compubuff

Was anyone able to set up free wap on the Audiovox 9900 since the forbidden 403 error -- other than just changing the homepage?


Posted by: aoLhaTer

i used to be able to get free wap on my vx4400 but it no longer works

ive tried two gateways but whenever i try to get to a webpage its says
Server not responding


did verizon block me from free wap or something?


Posted by: royta

same deal here.


Posted by: pal379

anything for the a-670? thanks!


Posted by: Ri0

Verizon has blocked it.


Posted by: FL1134

Quote:
Originally posted by Ri0
Verizon has blocked it.


No they haven't.

Pick a server from here if you have WAP 2.0:
http://www.publicproxyservers.com/


Posted by: compubuff

Quote:
Originally posted by FL1134
No they haven't.

Pick a server from here if you have WAP 2.0:
http://www.publicproxyservers.com/



THANK YOU!!



Posted by: jae77

i don't see any addresses there that specifically state they offer a WAP gateway.

can you post a specific ip that actually works?


Posted by: thomaconda

I've tried many different IPs and they all seem to work in some ways, but for my use I can't get into Yahoo for email or messaging 'cause it seems some of the listed proxies are in different countries..?? would anyone have a suggestion..I merely want to check my email once a day or so and maybe someone can help.. I found one a few weeks ago that you could log into Yahoo, but I can't seem to remember it or get it to work email me or Private message me !! tom tomsat(@)yahoo.com


Posted by: lets456

Finally got it with a little searching and fiddling:

First hit "menu" then 073887* (do it fast) and security code: 000000 (fill it up with zero's)

Then go to "Web sessions"

Change IP 1 to: 65.197.94.250

Change IP 2 to:63.226.96.241

Scroll to port 1 and port 2 and change both to: 80

I set my home page to: http://www.google.com/wml

Save it under your name and your on your way.

Also, there are field test modes and other goodies in here!!!!

Happy surfing!


Posted by: mean2u

Hey, lets456
The Gateway works like a CHAMP! I just got it set up on my V710 and it is flying, plus it supports WAP 2.0 browser.
I do have couple of questions for you though...
As we all know... all good and free stuff sooner or later comes to the end... So, do you who's gateway are we using? and even more important question, how long do u think it will stay up, b4 it'll be shut down?
I was too lazy to look up IP addresses on the net, so decided to aks you.





Posted by: lets456

Yep, I wondered the same thing. Anyway, this where I got it:

http://www.publicproxyservers.com/index.html


Posted by: mean2u

Hmmm.... Interesting...... this web page stopped working for me about a month ago, but I will have to admit that I haven't checked it since them.

Oh well, at least we got some public(coz nothing is free ) WAP 2.0 gateway up and running for now.

NOTE fot the Moderator:
Could u please move this thread to the FAQ under Sticky Free WAP Thread?

Thanks a lot!




Posted by: lets456

Your welcome....

Bye the way, my connection is at snails pace. Also, I have been getting alot of "timed out" errors. Any suggestions on this?


Posted by: frail

Quote:
Originally posted by mean2u
NOTE fot the Moderator:
Could u please move this thread to the FAQ under Sticky Free WAP Thread?

Thanks a lot!


Done.


Posted by: FL1134

Quote:
Originally posted by lets456
Your welcome....

Bye the way, my connection is at snails pace. Also, I have been getting alot of "timed out" errors. Any suggestions on this?


Don't forget these are FREE proxy servers. Some are dynamic and/or temporary and might have certain things blocked. You can try using whois and pinging the IP to see who owns the server and how reliable it is. You can also limit domains used (.com, .edu, etc) that should be more reliable.

Sites to try:

http://tools.rosinstrument.com/proxy/
http://www.atomintersoft.com/produc...oxy/proxy-list/
http://www.cybersyndrome.net
http://www.samair.ru/proxy/
http://www.stayinvisible.com
http://www.multiproxy.org/anon_list.htm
http://www.proxz.com
http://www.proxy4free.com
htttp://www.publicproxyservers.com
http://www.anonymitychecker.com


Posted by: urandom

Anyone knows how this works at a Sagem MY V-55 ?


Posted by: xeffu

Quote:
Originally posted by lets456
Your welcome....

Bye the way, my connection is at snails pace. Also, I have been getting alot of "timed out" errors. Any suggestions on this?


Switch proxies. I couldn't even connect to many sites for a few days when using the two IPs you listed, although it worked fine when I first began using them. So, I switched.

I'm now using

65.203.88.43 port 8080, and...
66.23.49.36 port 80

Tons faster and loads the pages I couldn't access with the old one. Good luck.


Posted by: onii

anyone know how to set up a d410 for this? I tried for half an hour and couldn't get it. There doesnt seem to be a port option. im on tmobile btw


Posted by: JenJen

Quote:
Originally posted by onii
im on tmobile btw


This is the Verizon Wireless forum.


Posted by: id4rox

Please reference people to this posting of mine in the future, as I am posting it here alone. It is valid for anyone who wants to use WAP on their phone, ie: anyone who ever needs/needed a 'free wap gateway'.

If you have a broadband internet connection that is "always on", with a computer that is always on, you can have free WAP on your phone (any phone that uses WAP, any providor) without worrying about switching "free gateway" IP's and trying to find working ones every week (or whenever). You can run your own WAP gateway on your windows computer, so that you have a permenant WAP gateway server for your phone to use and never have to worry about it stopping (so long as your internet and computer are both on).

Download now.wap from here:
http://www.nowwap.com/download/wapgw.exe

Install the program. When it is installed you open the program and hit the START button. Tick RUN AS SERVICE box. That is it. Configure your mobile phone to use your computer IP (www.whatismyip.com) for the gateway, and use port 9201. You now have your own WAP server that will never go down on you so long as you keep the computer on.

There are two more things to do to ensure smooth operation:

1) You need to make it so that now.wap is in the startup folder in start > programs, this is so when you restart your computer, now.wap is automaticlly started for you. Create a shortcut for the program, then drag the shortcut to the startup folder.

2) now.wap has a 30day trial limitation. This trick will let you sneak around the 30day limit by keeping your trial on 30 days remaining without decreasing.
a) Download www.livefromhawaii.com/nowwap_trial_reset.reg
b) place the reg file somewhere on your computer (I used the now.wap folder in program files) and then create a short cut for the reg file. Put this shortcut in the startup list. Now when you turn on your computer it will automaticlly run both the .reg file and the now.wap program with a fresh 30day trial limit.

That should be sufficient for anyone with a 24/7 internet and computer to get their own WAP and end the problem with "free wap gateways". Follow what I said above, and you will have it. This is your own private gateway, and unless you tell people your IP address, no one else will be able to use your gateway. No worries about it ever going down on you, having to change gateways (If your IP ever changes you just have to change the phone to your new IP), slow access, features being disabled, websites blocked, etc.

Enjoy it all, archive it somewhere, forward people here, I've seen enough of the same posts looking for / arguing over IP's, hopefully this helps.

Aloha


Posted by: thomaconda

Cant wait to get rid of this modem here in the middle of no where land..Maybe I'll find someone who will share their IP with me eh?


Posted by: justincase

id4rox ,

I did exactly what you said and I cannot connect. I am behind a zone alarm firewall, but I allowed full access for the nowwap program. Any suggestions?


Posted by: id4rox

Close zonealarm and try again. If it works, find out whats wrong with zone alarm. if you use a router, log in to it and forward port 9201. Verify port and address on the phone.


Posted by: justincase

OK, zone alarm was being a bit goofy, so I got rid of it and just installed the latest F-Secure. Then I allowed all traffic and I still couldn't get in. I'm just on home system with a cable modem using windows 2000, nothing fancy and no routers of any kind. Not sure what's up...


Posted by: id4rox

Sorry then, I don't know. I posted the info for people to get free WAP, but am not going to help everybody troubleshoot getting it to work on their computer. I told how to install and run the gateway and how to bypass the trial limit. After that, you are on your own to manage the computer and IP and programs access, and programming the gateway information in to your phone.

good luck to all.


Posted by: justincase

Final Edit: I finally figured it out. I used port 80 and other ports of 8080 and then created an allowance of a range of inbound IPs in F-Secure (since the phone's IP is dynamic) and all is good.

Thanks for the post though, it got me there! Just needed some tweaking from both my phone and computer's setup


Posted by: MadDogMike

Quote:
Originally posted by slantednet
I've gone through about 3 different wap ip's on my 4400 and they all return the same failure (Server not responding).


Ditto on my A530. I haven't been to the forum in a while, and I haven't used my mobile web in a long time either. Now I have a need to use it, and I can't get it working. This forum used to always get me going, but now it doesn't seem as useful. Is there some other source for good, free WAPs?


Posted by: vermouth

So the home page keeps resetting to the openwave.com address on my vx6000, and I get a 'server not responding' message. How do I get the page I want to stick?


Posted by: Dharmster

I just got my KX2 and in reading through the entire thread couldn't find instructions for my phone. Anyone know how to set the KX2?


Posted by: turtle2472

I have been seaching and not seen anything on the v710 setup. Would someone please share their settings with me on this one. I would love to get this up and running. I did get the WAP Gateway program to run on your home PC so you know it will never change, but I don't know how to configure my phone. Help please.


Posted by: FL1134

Quote:
Originally posted by turtle2472
I have been seaching and not seen anything on the v710 setup. Would someone please share their settings with me on this one. I would love to get this up and running. I did get the WAP Gateway program to run on your home PC so you know it will never change, but I don't know how to configure my phone. Help please.


after using string "v710 wap setting" revealed this:

**Free WAP for V710 tutorial***




vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser