vB Easy Archive - How to Remove Ngage QD cover

Pages: 1

How to Remove Ngage QD cover
(Click here to view the original thread with full colors/images)

Posted by: SuddleD

I found this while searching around the net, I didn't see any other instructions posted here, so excuse me if I missed them. I want to change my cover, as soon as I can find one for it....
_______------===------_________
The QD's cover is only held by the two clips you see behind the battery cover. Remove the battery and cover. Push on the two clips a bit to disengage the top part of the cover. Now turn the QD over, keypad side up.

Then, holding only onto the rubber edge, push down hard on the four-way controller, you'll hear a small click and the left side will open up, then do the same thing on the right side, pushing down on the number pad in the area corresponding to the directional pad (2/3/5/6 area) until you hear the click...

To get the cover back on:-

Looking at the front of the phone (keypad), pull the rubber flaps out of the way with your fingers for the power flap, and your thumbs for the card flap.

Line everything up, and push down. It should give you a few solid clicks as you press together the front and back around the edge. And then of course put your battery back in and replace the cover.

You're now ready to start again!