vB Easy Archive - Programming Codes

Pages: 1

Programming Codes
(Click here to view the original thread with full colors/images)

Posted by: vetteman82

here is a list of codes to get into various parts of the phone. can be very handy. be careful on some of them. u might have seen this list already.

##1111 - should display the amount of file space on the phone, but usually just fades out the screen. Press END to get back to normal.

##2773 - field test mode. The default SPC code, if prompted, is 000000.
Rx = Receive power measured in dB.
Tx = Send power measured in dB.
P_Rev Protocol Revision = 6 is 1x, 4 is regular CDMA.
Ec = A measure of how strong individual connections from the tower are compared to everything that the tower is transmitting. Compares the pilot signal to the overall level of traffic, but this is a good indicator of how your connection compares to the overall level of traffic from the tower. -3 dB to -8 dB is usually a “good” Ec. When Ec gets larger, like -10 dB or -15 dB phones will start having trouble maintaining their connections, even with full signal.
C = Channel. B side carriers start on 384. Will increase by 1.25MHz or 41 channels.

##20022002 - Be very careful! NAM programming menu. Under "Voice Option" you can also change your vocoder to 13K QCELP for a better sounding vocoder, but I'm not sure if Verizon supports it.

##2222 - display CDMA Automatic Gain Control and Low Noise Amplifier data

##2240 - S/W test. I don't know what any of this is, so be careful.

##2250 - RFNV Contents. Tons of options here. I have no idea what they do.

##2283 - Set the data port baud rate.

##7738 - Change P_Rev. Allows you to force CDMA (Select Rev 4)

##1122 - Test ringtone, vibrate, and colors. Adjust contrast and stuff.

##1133 - Be careful! Resets the phone back to factory settings.

##1144 - Change the length of the keypad tones. Navigation keys don't work here, use the numbers to change values.

##27752345 - Battery info and modification. Be careful!

##27732726 - Software tests and stuff. Displays the date/time of firmware. Lots of cool stuff in here.

2539** - Change authentication key. Be VERY careful!