vB Easy Archive - Eyesonly's Custom V398 Monster Pack

Pages: 1 2 3 4 5

Eyesonly's Custom V398 Monster Pack
(Click here to view the original thread with full colors/images)

Posted by: stj2000online

Quote:

Originally Posted by mushpop

guys guys guys...hmm..did you guys backup original Websession before putting in the eye's released MP? i don't think it is a bug. i've already used MMS with v1/2/3/4 and had none prob about that. I put back my original Websession file after flashing it. So, this is not a bug. Try this seem edit:

SEEM 010a_0001

**all offsets are HEX**

offset 00 - bit 0: GPRS auto-attach at power-on (1 on, 0 off)

This edit will make your GPRS is in auto attach when power on.....

1) i also don't have problems with MMS, as long as i'm using the correct operator settings in the websession file.
2) thanks to eyesonly_d we already have a menu option for GPRS auto attach at power on - it's under Office tools -> Engineering -> Phone capabilities -> GPRS auto attach.

Posted by: djdano

lploon: yes, you can now do that, but eyesonly wrote in the changelog: Master Clearing / Master Reset may still have some side effects. Works well enough on my phone at least.

save: you can change the Cust_Start~up.mp3 file from the /a/mobile/audio folder with one of your choice.

Posted by: mrQQ

im having this strange problem - im not sure what caused it, but perhaps i deleted some needed file..

anyway, when i go to multimedia meniu, all the icons appear fine.. but when i move cursor, the icon which was selected disappears..

then the next one disappears, and so on..

if i go out and back, they appear again.. this happens with all skins..

any ideas? :/

thanks..

Posted by: tvrtkod

Quote:

Originally Posted by mrQQ

im having this strange problem - im not sure what caused it, but perhaps i deleted some needed file..

anyway, when i go to multimedia meniu, all the icons appear fine.. but when i move cursor, the icon which was selected disappears..

then the next one disappears, and so on..

if i go out and back, they appear again.. this happens with all skins..

any ideas? :/

thanks..

Solution is very simle. turn of Animation in your Inital Setup menu

Posted by: mrQQ

it worked! what is that setting supposed to do?

Posted by: tvrtkod

Quote:

Originally Posted by mrQQ

it worked! what is that setting supposed to do?

when it works, and that is very rare, it produces a flashy effect when clicking on icons and confirming some actions while browsing your phone. And afcorse, ilast, but not least, it eats up you icons (very bad side effect)

Posted by: mushpop

stj2000online: Im sorry...i forgot about the option in the menu.

Thanks for correcting me

I think Animation option won't work correctly in E398. or maybe the alternate skins we use do work correctly with animation turned on. I think it should be turned off or removed in next coming MP. Not worth anything thou

Anybody have tried V3 with latest E398's re/flash file? Dont tell me about the menu speed. Overheard about it. Wanna hear about the pic quality, the sound quality, the bugs they have been fixed and stuff. Menu speed should be less compare to it's main functionality - "Multimedia phone" (correct me if im wrong

)

save: yes, you can

Change Cust_Start~up.mp3. remember to set it to attribute 4

Posted by: save

what do u mean by settin it to attribute 4

Posted by: realimpaq2

[QUOTE=mushpop]guys guys guys...hmm..did you guys backup original Websession before putting in the eye's released MP? i don't think it is a bug. i've already used MMS with v1/2/3/4 and had none prob about that. I put back my original Websession file after flashing it. So, this is not a bug. Try this seem edit:

SEEM 010a_0001

**all offsets are HEX**

offset 00 - bit 0: GPRS auto-attach at power-on (1 on, 0 off)

This edit will make your GPRS is in auto attach when power on.

About losing the messages, i don't have the problem too. many times i plug out the battery still have the messages intact. Try play around with this seem

SEEM 0032_0001

offset 40 - bit 6: SMS storage (0 for phone, 1 for SIM).

Good luck. Remember to restart your phone after modding it.

thanks 4 ur reply.

I used my back-up websessions. i can browse my carrier site and i can receive mms but i cant send mms.
im sure i have the correct settings. what d hell is wrong w/ my phone?!??!!?!?!?!

is there a way to LOCK the delete option in outbox sub-menu. Like when you try to delete messages
you`ll b ask to input the lock code. Like in "Lock application". :evileye:

by the way :thanx to eyesonly 4 this!!! mp

Posted by: pidyok

Quote:

Originally Posted by realimpaq2

problems in v398 mp

- messages stored on phone memory are erased when you remove the battery.

- MOST ANNoying thing on this firmware is when you try to send mms, you'll see a progress bar
then when its near completion "unable to send" message is displayed.

- it restarted once when im using gprs

can anybody help?

mga NOYpI jan 2long naman. nakakapagsend ba kyo ng mms sa mp n to weh?!

i once had that prob... ask globe/smart to email you the procedure... it has something to do with the step-y-step config of your gprs-then-msg-setup-then-mms set-up thing... kailangan sunod sunod yun... i cant email you the procedure since i don't have outgoing mail in the office... better yet, you ask frmo globe oprtr... and just make sure... you have enough (neer went below 25Php) prepaid credits (not psaload) for the past 24Hrs...

hope this could help you...

Posted by: realimpaq2

Quote:

Originally Posted by pidyok

thanks dude!!!

Posted by: originalgoast

im having a huge problem right now. i cant get reception at all. and if i do it is for like 2 sec then it is gone. what can i do and has this happened to anyone else

Posted by: mushpop

Quote:

Originally Posted by originalgoast

im having a huge problem right now. i cant get reception at all. and if i do it is for like 2 sec then it is gone. what can i do and has this happened to anyone else

Try adjusting Band, Type and Speed under Network Setup. You should try scanning your cell network too. Else, try disabling 850 network using this seem edit: - Seem 0025_0001: uncheck/disable/untick bit 1 and 2 at offset 00 ( 900/1800 and 1900 bands only )

Posted by: mushpop

Quote:

Originally Posted by save

what do u mean by settin it to attribute 4

Attribute 4 is system file attribute which it wont be deleted if you do Master Clear. If you used P2KMan, select the file and click on System File then press button Change attribute.

Posted by: binoy

I'm using V398 MP3 . considering MP4. My problem is when i forward a SMSM it shows
FW: From:<phone_number> MSG : <then the sms message>

I really do not need that. My original phone did not have it nor does any phone i have used. I have to manually remove it everytime. Will MP4 fix this. Or is there a seem edit to change this behavious.

Thnks,

Posted by: eyesonly_d

There is a seem edit to fix this behavior. I ran into it a couple of days ago while trying to find the camera length edit, unfortunately I don't have my notes in front of me. However a good place to look at is Xlr8's site or in the seem32 function editor in P2kAdvance. <THINKING TO SELF>Hrm, maybe this post doesn't help very much after all. Whatever, I'll just post this.</THINKING TO SELF>

Posted by: realimpaq2

is there a way to LOCK the "delete option" in outbox sub-menu. Like when you try to delete messages
you`ll b ask to input the lock code. Like in "Lock application". :evileye:

Is this possible???

Posted by: motoe398

Quote:

Originally Posted by binoy

I'm using V398 MP3 . considering MP4. My problem is when i forward a SMSM it shows
FW: From:<phone_number> MSG : <then the sms message>

I really do not need that. My original phone did not have it nor does any phone i have used. I have to manually remove it everytime. Will MP4 fix this. Or is there a seem edit to change this behavious.

Thnks,

Eyesonly_d ,could you please tell the exact seem to disable this option.I could'nt find it anywhere in P2k Advanced Menu Editor.

Congratulations on finding the seem ,BTW.

Posted by: deathstroke642

Quote:

Originally Posted by realimpaq2

use this http://www.myglobe.com.ph/portal/co...otorolaE398.pdf

Posted by: realimpaq2

Quote:

Originally Posted by deathstroke642

use this http://www.myglobe.com.ph/portal/co...otorolaE398.pdf

thanks !!!
ok! problem solve!!!

it takes a rocket scientist to figure it out. hehehe

Posted by: realimpaq2

Quote:

Originally Posted by motoe398

Eyesonly_d ,could you please tell the exact seem to disable this option.I could'nt find it anywhere in P2k Advanced Menu Editor.

Congratulations on finding the seem ,BTW.

heres the seem edit, use p2ktoolz seem editor

seem 0032_0001

offset 49 - bit 3: SMS forwarding header (prepends to subject
when forwarding a message)
(1 add header, 0 no header)

taken from xlr8's site. gud luck! this is my first useful post. :rolleyes2

Posted by: motoe398

Original and UN manipulated, Read straight from phone.Header is still there.

Maybe it's something else.
Please help me out

Posted by: realimpaq2

Quote:

Originally Posted by motoe398

Original and UN manipulated, Read straight from phone.Header is still there.

Maybe it's something else.
Please help me out

just turn on bit 3, then write to phone then restart ,maybe its inverted! gudluck

Posted by: binoy

Quote:

Originally Posted by realimpaq2

Thanks, Thanks .... it works
(0 add header, 1 no header)

Posted by: realimpaq2

Quote:

Originally Posted by binoy

Thanks, Thanks .... it works
(0 add header, 1 no header)

ok. and im not stealing anybodys THUNDER.

Posted by: Goldfingiz

Anyone have a working link? I scrolled through a bunch of pages but couldn't find anything

Posted by: djdano

Quote:

Originally Posted by Goldfingiz

Anyone have a working link? I scrolled through a bunch of pages but couldn't find anything

a working link for the MP? here ya go:

http://www.motov398.tk/
or
http://motov398.tk/

Posted by: Goldfingiz

Quote:

Originally Posted by djdano

a working link for the MP? here ya go:

http://www.motov398.tk/
or
http://motov398.tk/

Thank you sir!

Posted by: UmmaDoMe

ok i have e398 and mine is unlocked will this flash do anything to lock my phone by any chance

Posted by: soopah256

does anyone have problems accessing GPRS?
i'm using Cingular, and am trying to access MEdia Net...
i put in all the proper settings (obtained from Cinglar.com and Cingular Customer Support).

but everytime i try to access the web, it goes through the progress bar, and ends with a "GPRS Network not available"

does anybody know how to fix this?
thanks!
-soopah

Posted by: UmmaDoMe

is this file locked or unlockedd??

Posted by: motomaverick

Quote:

Originally Posted by mardosv300

is this file locked or unlockedd??

This flash does not lock you to any service. Also all major seem edits are done so not much modding required. Njoy!

Posted by: UmmaDoMe

thank you for answering my question now when i open multiflashflex tool and do all the steps and press start another box comes and says uknown super file version should say yes to continue to flash ??

Posted by: xsaint19

Flashed my E398 with eyesonly's V398 MP v4. Worked fine initially but since i normally turn off phone at night, noticed that white screen appear when power on in the morning. Worried but after a few tries + removing battery, managed to get the Moto screen displayed and working fine. Then for safety precaution, i proceed to power on and off a few times in between and everything's A-ok. Ignored it but on this fine day, it decided to just show me the dreaded white screen. Keypad works fine, eventlights are blinking, can hear sound (it even has startup sound when i enter my PIN - presumably it went to prompt for PIN page). But just a blank, white display..

Decided to flash with another MP (95R_A/GSKE398T673BZ100) using MFF but no bootloader screen displayed except for white screen. MFF say Flash Successful. But white screen problem persist when power on. Found errors in error log:

08:21:40, June 03, 2005
Line: 139
ERROR: C:\Downloaded Filez\Motorola Stuffs\Flash & Flex Filez\95R_A MP\e398a\E398_R372_G_0E.20.95R_A_PDS001_LP0015_DRM 0001_JPJAVA_G_0E_E398_05_03R_GSKE398T673BZ100_BOOT 07E0_1FFRAMDLD.smg was not found.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio. cpp

08:21:52, June 03, 2005
Line: 139
ERROR: C:\Downloaded Filez\Motorola Stuffs\Flash & Flex Filez\95R_A MP\e398a\E398_R372_G_0E.20.95R_A_PDS001_LP0015_DRM 0001_JPJAVA_G_0E_E398_05_03R_GSKE398T673BZ100_BOOT 07E0_1FFRAMDLD.smg was not found.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio. cpp

Help guys? Any would be appreciated right now..

Posted by: djdano

Quote:

Originally Posted by mardosv300

thank you for answering my question now when i open multiflashflex tool and do all the steps and press start another box comes and says uknown super file version should say yes to continue to flash ??

reading the thread might have cleared that up for you. or a quick search...

make sure that the "override existing phone software even if it is newer..." box is checked. the other 3 boxes below should be unchecked.

also, "enable flash" - checked, "enable flex" - unchecked.

Posted by: UmmaDoMe

i flashed it succesfully works great but the only problem im having is reception problems im not able to make a phone call it always says call failed and im not able to receive phone calls even though my reception is full and then it just drops when im driving or jsut outside anyone know whyy ???

Posted by: abugibugi

Flashed with MonsterFlash v4. The phone works much better afterword. However, I did lose the Chinese language option in the process. Is there anyone to only flash the language pack back?

Posted by: abugibugi

After expending EYESONLY's mosterspack, I saw 8 files. Which one of these is the language pack? I have the LP0014 file. I know that I will also need to edit the checksum and address information in file number 0. Has anyone does this before?

Posted by: rivvah

Quote:

Originally Posted by abugibugi

After expending EYESONLY's mosterspack, I saw 8 files. Which one of these is the language pack? I have the LP0014 file. I know that I will also need to edit the checksum and address information in file number 0. Has anyone does this before?

eyes just started a new thread the other day with a brand new revision of his SHX modding guide; I suggest you head on over here:

http://www.howardforums.com/showthread.php?t=648198

hth, he's put in a lot of time with this.

Posted by: longwei

Quote:

Originally Posted by rivvah

hmm any idea where can i get a chinese language pack for this?

Posted by: rivvah

Quote:

Originally Posted by longwei

hmm any idea where can i get a chinese language pack for this?

I've only seen language 0014, 0015, and 0016 for firmware 95R (not 95R_A which is in the V398 pack) as standalone reflashes. Go over to mobile-files.com and look for these:

R372_G_0E.20.95R_lang0014_reflash.shx.rar
R372_G_0E.20.95R_lang0015_reflash.shx.rar
R372_G_0E.20.95R_lang0016_reflash.shx.rar

There is also one known monster pack of 95R_A that has 0015 that you could look for:

E398_R372_G_0E.20.95R_A_PDS001_LP0015_DRM0001_JPJA VA_G_0E_E398_05_03R_GSKE398T673BZ100_BOOT07E0_1FF. rar

No, I don't have these to give you before you ask.

There's a thread over there on mobile-files called 'E398 All Version' that has a lot of the links to the files.

Posted by: rivvah

Quote:

Originally Posted by longwei

hmm any idea where can i get a chinese language pack for this?

There's a thread over there on mobile-files called 'E398 All Version' that has a lot of the links to the files.

Posted by: UmmaDoMe

this monster pack does not work on the rogers network can u fix it by any chance??

Posted by: abugibugi

After following EYESONLY's document on making SHX files, I was able to build a 0014 (Complex Chinese) language pack. The pack flashes just fine. However, I did discover one possible bug or configuration issue. When I am in Chinese mode, the phone would pause indefinitely when I go into phone book with "Please Wait" message on the screen. It doesn't have this problem in Automatic or English mode.

Any idea?

Posted by: sav2003

does anyone knows why MultiFlashFlex can't find my e398 ? windows find it . . .

Posted by: D3LM3L

Why is that none of links I've tried that go to motov398 or the monster pack, just don't work??? Does anyone have a working link to the most recent one? I'm not going through 22 pages just to find it...

Thanks to anyone who provides a link

Posted by: djdano

Quote:

Originally Posted by sav2003

does anyone knows why MultiFlashFlex can't find my e398 ? windows find it . . .

make sure that the drivers are properly installed and that PST and p2ktools can connect to your phone.

Posted by: sav2003

I solve the problem . . thanks

Posted by: djdano

Quote:

Originally Posted by D3LM3L

Why is that none of links I've tried that go to motov398 or the monster pack, just don't work??? Does anyone have a working link to the most recent one? I'm not going through 22 pages just to find it...

Thanks to anyone who provides a link

which 22 pages are you scrolling through, the first 22 or the last 22? :rolleyes2 kidding...

the answer to your question is on the very first page of this thread.

Posted by: AdrianPL

hmmm...
I flashed my e398 to this whole V398 and my question is....
when i want to instal on it a lang pack i use those for the E398 or V3 ??

this maybe sound stupid but i,m a begginer in this matter...

sorry for my english

Posted by: stj2000online

Quote:

Originally Posted by AdrianPL

hmmm...
I flashed my e398 to this whole V398 and my question is....
when i want to instal on it a lang pack i use those for the E398 or V3 ??

this maybe sound stupid but i,m a begginer in this matter...

sorry for my english

You use those for E398. I don't know if a V3 LP works on E398.

Posted by: abugibugi

V3 language pack does work on E398 for the most part. The exception I found was Chinese Complex 0014 and 0016 does break the phonebook.

Posted by: mantolini

Quote:

Yeah i am having the same problem with the link. And i am talking about the one on the very first post.

Posted by: stj2000online

mirrors #2, #3 and #4 at www.motov398.tk ARE working. at least for me...

Posted by: hammerjit

Frist of all...I thought GIKE with 99R was good...but when I took up the risk by flashing with V398...all I can say thank lord there is a genius among us. And also a special thanks to eyesonly.

Now for my issues.

i) How do I extract the skin inXenonAB from v398 and put in another e398 which I intend to keep the original flash & flex.

ii) How do I change the date and time in inXenonAB to be at top center (the same as Techno in v398)

iii) This issue I would really like if someone could help me out. The backlight I have choose as 20seconds but each time power down power up (usually happens when the battery emptied) it will go back to 60 secs. Any way to force it to stay at 20secs?

iv) Now you would ask me why u wait till ur battery runs out...well the thing is that I am heavy user of the GPRS, so my problem is the backlight will be on for quite long time....I can finish up using my fully charge battery less than 16hrs....so the next issue is when using GPRS and staying idle at one site...the backlight will be on for quite some time...I think a min or more...is there no way to make it go off like 20-30secs?

v) How to remove the 3 square button beside the strength indicator. I already tried the engineering->Phone Capabilities-> Gp Auto Attach-> set to on but the icon is still there.

vi) How to remove the red line at the right end (you can see it when you browse through your phone book.

vii) Why don't you remove all the Web Sessions. I mean like for ppl from another country, this web sessions are not required.

Ok now for a general question which puzzles me....if this phone can play stereo music, why can't it play stereo video? why we have to stick with the AMR-NB mono stuff. I always show off the mp3 capabilities when comparing my friends nokia phones...but for videos I dare not...since I think videos are a bit choppy playing on e398...even though with v398...but I do wish can play video with stereo support...e1000 perhaps???

Thanks again eyesonly...and who ever who can help with me issues.

Posted by: mantolini

Quote:

Originally Posted by stj2000online

mirrors #2, #3 and #4 at www.motov398.tk ARE working. at least for me...

Yeah i got it working finally! on mirror number 2...it was the security settings in my firewall. Now all i have to do it work out how to get it onto my bloody phone! Any help from step 1 to end would be greatly appriciated

I think my problem is that i dont have Product Support Tools...mainly because i have searched from one side of the internet to the other and cant find a download for it. grrrr. If someone could tell me just exactly what to search for that would be great

Posted by: djdownhill

Quote:

Originally Posted by mantolini

Motorola _ _ _

hint in Bold ^^^^^^

Posted by: textus

How do i get the English/Simplified Chinese back into the V398 after flashing? Are there any consequences like breaks in the phonebook or something? Thanks!

Posted by: aborrero

I just flashed my phone with Eyesonly's Custom V398 Monster Pack, great job much better than the stock software. One thing though, before the flah when I hooked my phone up to my computer with the USB cable, Windows would show me a new drive letter so I could navigate through the transflash card but now when I hook it up I doesnt recognize it. The speed wasn't great, but now I have to remove the card to read and write directly to it with the SD adapter. I know I'm gonna end up breaking it, it;s way to fragile to be going in and out of my phone all the time Any suggestions?

Posted by: djdano

Quote:

Originally Posted by aborrero

I just flashed my phone with Eyesonly's Custom V398 Monster Pack, great job much better than the stock software. One thing though, before the flah when I hooked my phone up to my computer with the USB cable, Windows would show me a new drive letter so I could navigate through the transflash card but now when I hook it up I doesnt recognize it. The speed wasn't great, but now I have to remove the card to read and write directly to it with the SD adapter. I know I'm gonna end up breaking it, it;s way to fragile to be going in and out of my phone all the time Any suggestions?

1. try formatting the card from the phone menu and see if it works.

2. use Mobile Phone Tools to access the card and copy on it. the program will be able to access the card even though you can not see it as a drive.

Posted by: Slowpoke SS

Quote:

Originally Posted by aborrero

Check if "USB Settings" is available under Office Tools. If so, then change the setting from Data/Fax to Memory Card.

Posted by: pidyok

ive got 1 problem with v398 v4... ive flashed my phone by eye's v398 and have long been using this for the past few weeks... however, just recently, after removing battery to clean my phone, all messages from my INBOX were deleted including the locked messages... ichecked it out using benzol's and checked phone memory to store msgs and yet my sms were lost after removing battery...

anybody know how to solve this problem of mine??? er, seem edit my that'll maintain msgs at the inbox even if the battery was removed...

thanks!

Posted by: jonakic

i have the v398 mpv4.anyone know if the v635 firmware work to E398?

Posted by: GuInHoW

Quote:

Originally Posted by pidyok

ive got 1 problem with v398 v4... ive flashed my phone by eye's v398 and have long been using this for the past few weeks... however, just recently, after removing battery to clean my phone, all messages from my INBOX were deleted including the locked messages... ichecked it out using benzol's and checked phone memory to store msgs and yet my sms were lost after removing battery...

anybody know how to solve this problem of mine??? er, seem edit my that'll maintain msgs at the inbox even if the battery was removed...

thanks!

Mine have this problem too.. i've made a seem edit to store sms in the SIm card. By this way your sms wont gone after you remove the battery. Work for me

Posted by: djdano

Quote:

Originally Posted by jonakic

i have the v398 mpv4.anyone know if the v635 firmware work to E398?

no, it doesn't, don't even think about it.
the only firmware that works on e398 is R372.

Posted by: xchevyxtc

http://motov398.tk/ is down. Anyone know of an alternative for someone late to the party??

Posted by: djdano

Quote:

Originally Posted by xchevyxtc

http://motov398.tk/ is down. Anyone know of an alternative for someone late to the party??

the site works fine. at least it does with IE 6.0

Posted by: shaneus

Works fine with forefox aswell, i think u need to get a new ISP,

Posted by: Curlykicker

I'm also having trouble loading that site. I get the same basic message in both IE and Firefox: "www.motov398.tk could not be found. Please check the name and try again." I'm using Time/Warner Road Runner from S. California as my ISP.

Posted by: Curlykicker

From my ISP:

We understand you are unable to access .TK websites. This issue is a known issue with .TK websites. The host of these sites only accepts requests from a specific IP range of Road Runner customers. In order for their sites to be accessed on the Road Runner network, they must be configured to accept more requests. Unfortunately, this is not something Road Runner will be able to resolve as it is an issue with the actual server that is hosting these sites. Essentially, although they do accept some requests from Road Runner customers, whether you will be able to access the site or not is a Lottery. If you wish to have this issue resolved, you will have to contact the dot.tk host directly.

Posted by: Curlykicker

I asked the ISP help desk why I have problems with only .TK sites and they said: "Because the ip addresses do not change the same as they do on .TK domains."

Hmm, I don't quite understand that. Anyway, does anyone want to email the file or point me to another site where it's hosted?

Posted by: ya_saya

Find an anonimous proxy.

I use firefox, tab > option > general > connection setting > manual proxy configuration > fill that with new/ a new proxy.

Posted by: Shadoxity

Hey all, recently flashed with the v398 SOOOO MUCH FASTER

neway i dont know if i am just blind or if it was removed or what but...

i cant find out how to get the phone book to display names AND numbers???

HELP please

Posted by: deathstroke642

Quote:

Originally Posted by Shadoxity

Hey all, recently flashed with the v398 SOOOO MUCH FASTER

neway i dont know if i am just blind or if it was removed or what but...

i cant find out how to get the phone book to display names AND numbers???

HELP please

of course it will be erased when you flash the phone so if you did not backed up the entries, there's no way you can find it.

Posted by: Shadoxity

Quote:

Originally Posted by deathstroke642

of course it will be erased when you flash the phone so if you did not backed up the entries, there's no way you can find it.

no no no no no
im talking about the phone book listing...

like i have all of my contacts there, but i used to have it set out so that it would display the name with teh number below it, but now it just displays a list of names, and i cant find out how to change it...

thanx

Posted by: Shadoxity

AHHHH FOUND IT

it is called view by picture now... it said name/number on my old flash...

Posted by: sphinxter

Another thanks to eyesonly and the guys who contributed to the great V398 MP. Just flashed my phone and I'm totally satified with it, like most of the members who tried this v398 flash. I've also made some seem editing for personal preferences...

I just have one question that somebody might know the answer. Before I flashing, I backed up first the contents of the phone using p2ktools, every single file within the main directory and it's subdirectories. The reason is that I want to put back the sms stored in the phone before I flashed it. Does anyone know the file I can copy back to the phone to achieve this?

Thanks in advance!

Posted by: di0ck

ok, my flash worked great with one BIG exception.

I've lost all functionality of the [END] button!

Posted by: cstaves

Hey!
I just flashed my e398 with this Monster Pack, and everything worked great. Thanks a lot Eyesonly for making it so **** easy! Now, the only problem is this:

Before flashing it, I was able to sync to my Mac using iSync over Bluetooth. I could sync Contacts AND Calendars. Now I have lost all iSync capability. I can connect to my computer via BT, but iSync doesn't work with it. Is there any way around this? I really want to have iSync over BT but I also want VoiceRecord and all the other spiffy features of V398!!!

Also, is there something I have to change to make my phone see the Cingular network? I am in NY, and it always connects to AT&T Wireless. I guess they're the same company so it shouldn't matter, but still... Any thoughts?

Thanks!

Posted by: di0ck

i have a network issue like that, but mine always connects to Cingular, when i am a Tmobile user, and as far as network priority, the first 20 of em are tmobile and it ends up on #22 - cingular wireless..... been that way ever since i got the e398 outta the box... and my tmobile bill is still the same, no roaming or anything.

has anyone had problems after the flash where they lose all functionality of the [END] button? I can not end calls myself, I cannot turn my phone off or on, I cannot hang up on voicemail EVER, and I cannot exit to the desktop with one-hit from any menu! I have to back out with the softkeys to go back/back/exit to the desktop.

Posted by: shaneus

I don't have that problem, but u should redownload it, and reflash your phone with the copy you just downloaded. If this doesnt work one of the gurus will help you out with a seem edit, if the button doesnt have an issue.

Posted by: di0ck

Quote:

Originally Posted by shaneus

I don't have that problem, but u should redownload it, and reflash your phone with the copy you just downloaded. If this doesnt work one of the gurus will help you out with a seem edit, if the button doesnt have an issue.

thanks for the response... it was sort of noob sounding the way i put it. i pretty much knew all i could do is reflash it and try again, but i was seeing if anyone else has had this.

Posted by: shaneus

Sorry if it was inturperated as if i was talking down to you, that wasn't the intension at all. After reflash let us know the result, let's hope it isn't an issue woth your button.

Posted by: di0ck

Quote:

Originally Posted by shaneus

Sorry if it was inturperated as if i was talking down to you, that wasn't the intension at all. After reflash let us know the result, let's hope it isn't an issue woth your button.

no worries... i was not offended, but i really appreciate you caring about my problem...

i was looking into how to perform the flash last night, but havent done it yet.
I have to download all the appz still... since the flash was performed on my phone by a friend with his laptop on the first go... i'm on my own this time.

Posted by: cstaves

So, anyone have any idea why I wouldn't be able to use iSync anymore after flashing with V398? I hope it's not a stupid question, but I searched around quite a bit and couldn't find any reference to iSync and this Monster Pack. Any ideas would be appreciated. Can I flash back to an earlier one that will work with iSync? (It worked perfectly with iSync before I flashed, so I assume that it's not working now because iSync no longer recognizes my phone as a model it supports)

Thanks!

Posted by: goofy17

Hi there,
Can somebody using the eyesonly's v398 monster post the original seems 0032_0001; 005b_0001; the plmn_text_table.bin and mma_ucp... and even other seems. now i am experimenting with a new software on my phone and i upgraded from v398 to 9cr and GSKE398T674TL107 but i forgot to backup the customizations of the v398. so now i'll have to do them on my own or save up that time if some helpful guy posts that seems and other stuff for me.
thanks in advance

Posted by: TimVFR

I have found the same problem with attemting to use iSync on my Mac after flashing to the V398-V4. It also worked just fine using my bluetooth for iSync, I can now only send/receive files to my V398. I would be very interested in fixing this issue. Any ideas?

Posted by: deathstroke642

Quote:

Originally Posted by TimVFR

I have found the same problem with attemting to use iSync on my Mac after flashing to the V398-V4. It also worked just fine using my bluetooth for iSync, I can now only send/receive files to my V398. I would be very interested in fixing this issue. Any ideas?

What Issue?

Posted by: TimVFR

Quote:

Originally Posted by deathstroke642

What Issue?

I forgot to quote the previous messsage. I am unable to sync my V398 contacts/calender using bluetooth (or cable). But, I can use bluetooth to send/receive files from/to my Mac. This occured after flashing to the V398-V4.

Posted by: pidyok

Quote:

Originally Posted by GuInHoW

Mine have this problem too.. i've made a seem edit to store sms in the SIm card. By this way your sms wont gone after you remove the battery. Work for me

yup, before i had 2 options, one to save my messages over my SIM and the second over my phone... problem with saving your messages over sim usually depends on your SIM capacity... which idont think for me is enough...

before I've upgraded to Eye's v398 v4, i store my SMS in my phone's memory but messages stays there even if i have removed the battery...

anybody can help me with this??? thanks!

Posted by: Dinalli

Im having a few problems since ive flashed this. Even though ive had flash succesful once its been programmed.

The phone will not swtich on but always goes to bootloader straight away.

Boot Loader 070.0
SW Version : R372_G_0e.20.8.BR

Is there a way to fix this ? or have i fried it ?

Posted by: mrQQ

seems i'm not the only one having problems with keyboard lights when using V4

im not sure if it's caused by this pack, dont remember how was it with original flex..

original thread here

Posted by: vikna

Download Mirrors

1.ftp://v398.newfreehost.com:motov398...A_MP_FULLv4.zip

2.http://www.m8racing.co.uk/V398_A_MP_FULLv4.zip
thanks to m8racing for provdeing a mirror

3.http://motov398.dantok.com/V398_A_MP_FULLv4.zip
Thanks Daniel for provideing a mirror

4.http://www.zirrio.it/e398/V398_A_MP_FULLv4.zip
Thanks Sirio Romagnoli for provideing a mirror

Posted by: stj2000online

Quote:

Originally Posted by mrQQ

seems i'm not the only one having problems with keyboard lights when using V4

im not sure if it's caused by this pack, dont remember how was it with original flex..

original thread here

Yes, I can confirm there is a probem with the keypad lights in MP V4. I just took apart my phone and indeed there is a light sensor but it's not functioning properly. I made some experiments and figured out it's a software problem, the lights are working fine with other firmware.

Posted by: stj2000online

Can anyone using Eyes MP V4 please tell me how to make the phone to show date on idle screen? I know how to do it and I made all the necessary seem edits for this (seem 01a8_0001) but it's not working. The phone shows date with every other firmware but the V4. I guess this is something caused by those new skins but I'm not good in skin editing stuff... thanks

Posted by: skypa

I flashed the V4 Monsterpack and it worked like a charm. Well, close to a charm I guess. I live in Germany with T-Mobile Germany as a provider. Problem is, my phone will not connect nor find _any_ networks since I flashed the phone. I tried to add "T-Mobile D" to the custom networks list, did not work either.

I also tried setting the phone to different bandwidths (you know.. 850 and stuff) but that didn't help.
I'm sorry if that problem already been solved on one of the 40 pages before, I could not find a solution to my problem. *sniff*

regards,
skypa

Posted by: djdano

Quote:

Originally Posted by stj2000online

Can anyone using Eyes MP V4 please tell me how to make the phone to show date on idle screen? I know how to do it and I made all the necessary seem edits for this (seem 01a8_0001) but it's not working. The phone shows date with every other firmware but the V4. I guess this is something caused by those new skins but I'm not good in skin editing stuff... thanks

download all the skin files from the skin you are using, use motoskin to open the ski file, set the opacity for "Date text" to 0, set the desired color, use "outline count" if you want to...

you can also change the coordinates on the screen.

Posted by: djdano

Quote:

Originally Posted by Dinalli

Im having a few problems since ive flashed this. Even though ive had flash succesful once its been programmed.

The phone will not swtich on but always goes to bootloader straight away.

Boot Loader 070.0
SW Version : R372_G_0e.20.8.BR

Is there a way to fix this ? or have i fried it ?

it seems that the flashing was not succesful, you still have the old s/w version. try reflashing the monsterpack.

Posted by: stj2000online

Quote:

Originally Posted by djdano

thank you, but i just figured out it's not because of the skins. i flashed back to 95R_A monster then uploaded all my seem backups from eyes' V4 and the phone does not display date again. it just ignores whatever is saved in seem 01a8_0001 and always displays 2 times carrier name but not date. strange...

Posted by: Simuki

I've flashed my e398 to v398 v4 month ago....after i made some seem edit to make it suitable for me i had no problem with phone's function. This flash is very good........eyesonly_d did great job........although i've seen many problems here on forum i have none of them.....

Pozdrav from Serbia

Posted by: longwei

Quote:

Originally Posted by Simuki

I've flashed my e398 to v398 v4 month ago....after i made some seem edit to make it suitable for me i had no problem with phone's function. This flash is very good........eyesonly_d did great job........although i've seen many problems here on forum i have none of them.....

Pozdrav from Serbia

yeah i just flash it too....feeling totally differnet but what i only need is a chinese language and it seems like the links in mobile files is don

Posted by: Soul814

one year too scared to flash n today i got bored so i was like what the hell, lol if it didnt work my mom woulda killed me for wasting 270 for the phone, bought it a year ago, got it 34R, lol i flashed it w/ the v4 monster pack and its looking nice =D its like playing with a new phone for the first time, gotta do some minor tweaks here and there not that bad though =), whats the USB connectiong thing? connections >> usb? I read about it when one of the flashes had it but I never cared to follow it since I wasn't going to flash.

I changed seem 01a8_0001 and removed the gprs n date and uploaded yet the date still shows?

Posted by: Neo519

So far this is the best MP I have ever tested. But one big problem I have is I can't send txt or make any calls. They all get dropped. I get full bars and stuff on reception, even checked FTS and I'm getting 76-80db. I am on rogers, and one of my tests is to call my voicemail, which is dialing my own number. I have never been successful completing a call since the flash yesterday. Yeah its nice and stuff, but a phone is nothing when you can't get call or receive calls, same with txts.

Does anybody know a remedy for this? I know the 850mhz is on by default, could this be the culprit? If so, any instructions on where to edit this out and have just 1900? I don't think mine is one of those rare quadband e398's, as long as I can receive and send calls.

Posted by: skypa

There might me the possibility, that outgoing calls are blocked. Look into your security menu, call barring or something like that.

Posted by: Neo519

Nope I have tried that, I do get calls sometimes, but gets dropped. 1 out of 10 calls, I get or make only 1. Same goes with text msg. Does anybody know the number to dial to check voicemail? I know you can dial your own number, but there is another number its a 416er.

Phone is useless if I can't make or receive calls and txts

Posted by: Soul814

its working fine for me lol =D flashed it today n im happy =D cept for the fack that i've given it water damage already lol

Posted by: mcferrari

I've already done a flex backup of my E398 99R firmware using Motokit 1.06. Lets say I flashed to v398 v.4 MP and I want to reflash back to 99R is it fine..

Thanks.

Posted by: pidyok

Quote:

Originally Posted by pidyok

anybody can help me??? please... thanks!

:rolleyes2

Posted by: Neo519

I don't remember what I did but, I was using P2KTools to disable some stuff. And now my menu is all list, I can't get back to the icon way. The setting says icons, but it is still in list view.

I did not seem edit anything, just used P2Ktools to disable all the IM stuff cuz I dont use that stuff.

Anyone have a clue?

Posted by: skypa

Quote:

Originally Posted by Neo519

I don't remember what I did but, I was using P2KTools to disable some stuff. And now my menu is all list, I can't get back to the icon way. The setting says icons, but it is still in list view.

I did not seem edit anything, just used P2Ktools to disable all the IM stuff cuz I dont use that stuff.

Anyone have a clue?

Yeah, your MainMenu has to have 9 Items to be shown in full Icon View.

Posted by: k3nnis

Hi guys,

i just flashed the V4 on my e398

So far so good. But it don't show the network name on my main screen anymore... How do i get it back?:P i.e. showing T-mobile or whatever your network is.

I know its no big deal but was just curious

Regards,
Kenn.

Posted by: Soul814

i use a program called seemplayer cause I don't know how to edit seems, its seem 01a8_0001 I believe

Posted by: Neo519

Yeah I had to enable at least one of the IM's to get back the icon menu.

But looks like I have to revert back to my old flash. I can never make or receive calls nomore. I missed over 30 calls this past weekend, and they were pretty important. All my calls get dropped and all my texts get can not send. But sooner or later (6-8 hours later) the texts go through.

Does anybody have a link to the 96Ra flash I think thats what it was.

I already tried to seem edit the 850mhz option, and that was worse I got no reception at all.

So please anybody with the link to the reflash for 96Ra, thanks.

Posted by: djdano

Quote:

Originally Posted by Neo519

So please anybody with the link to the reflash for 96Ra, thanks.

there you go >>> 96R_A reflash hacked by Eeyesonly

Posted by: k3nnis

Hi Guys,

I am located in sydney australia and am using thr eyesonly flash v4. Now there are no problems so far but 1 little thing. When you dial a phone number, i.e. 93117368, it comes up as 931-173-68

How do i get rid of the dashes?

Cheers,
Kenn.

Posted by: sirboost

Hey everyone,

ive got the software, ive got the fone, ive got the V4 V398 file ready to flash

but computer wont detect my fone, altho i can connect it and add pics/etc etc

just duno whats going on

my specs are:

p4 3g HT
windows xp pro v. 2002
1500mb dual channel ram
256m vid card
120g sata
20g ide

any ideas.

kennis u are from australia too, im from brissie mate.. if u could email me @

lithium_expl0si0n@hotmail.com and give me a hand doing this, that'd b great....thanks champ

Posted by: djdano

Quote:

Originally Posted by sirboost

ive got the software, ive got the fone, ive got the V4 V398 file ready to flash

but computer wont detect my fone, altho i can connect it and add pics/etc etc

make sure you have the drivers installed and make sure that you have the connection set to "data/fax" (not memory card) under connection menu in settings.

Posted by: sirboost

Quote:

Originally Posted by djdano

make sure you have the drivers installed and make sure that you have the connection set to "data/fax" (not memory card) under connection menu in settings.

fixed it all up

flashed it...

worked fine

thanks very much for all the pointers that everyone had along the way

V4 ROCKS! good on ya peeps

Posted by: TeSt DrIvE

Great support here in the moto forum!

anways I just got my e398 and flashed the software, now everything is fine, but i cant make calls or recieve them? any ideas. should I reflash?

Posted by: TeSt DrIvE

Nevermind just did a phone reset (through the phones menus) and it worked...

edit no it didnt, any ideas?

Posted by: TeSt DrIvE

Anyone please? Phone is perfectly fine except for the fact that i cant make calls or recieve them, please help

Posted by: Soul814

eh after u use v4 dont master reset

Posted by: TeSt DrIvE

so just master clear or nothing?

Posted by: Neo519

Quote:

Originally Posted by djdano

there you go >>> 96R_A reflash hacked by Eeyesonly

the file seems to be corrupt when i unzip it

Posted by: Neo519

Quote:

Originally Posted by Neo519

the file seems to be corrupt when i unzip it

Anybody else have this link? I really need my phone to get back to work.

For all of you who are having reception problems and connecting to network. Where was your phone made and what flash did it originally come with?

Mine is:
Made in Singapore
96R_a <slow but worked>

Maybe the newer phones are having problems with the v398 MP4?

Anyways, please someone post a full flash or reflash to 96R_a.

Posted by: Soul814

i remember in the v4 pack the readme FAQ was like dont do a master clear / reset

Posted by: shanku

Just change your skin .....

Quote:

Originally Posted by k3nnis

Hi guys,

i just flashed the V4 on my e398

So far so good. But it don't show the network name on my main screen anymore... How do i get it back?:P i.e. showing T-mobile or whatever your network is.

I know its no big deal but was just curious

Regards,
Kenn.

Posted by: IronRush

Hello everybody !
I want congratulation Eye to MP v4. It´s almost perfect.
I dont like only one thing. I take a picture with him, but when I put how wallpaper, they not stay fullscreen anymore. Have a way to fix it ??
Thank you.

Posted by: deeps7

wikkid! this is great!!! just a few questions

I put in v4...

1)Now, i don't seem to have the option for sms in phone, or sim... it is only sim i believe? looked through all the menu's in the msgs section. what am i missing

2)any chance of an auto-keylock in the next version?

3)also, when i press menu. by default, it goes to the middle icon. on one of the skins from before, it started default on the top left. i'm used to that..is it possible to get that back via a seem edit or someting?

4) The voice record is really handy, but is there a way to make it playback, via speakerphone? instead of just softly?

Nice work none the less! Keep it up!

Posted by: djdano

Quote:

Originally Posted by deeps7

wikkid! this is great!!! just a few questions

I put in v4...

1)Now, i don't seem to have the option for sms in phone, or sim... it is only sim i believe? looked through all the menu's in the msgs section. what am i missing

2)any chance of an auto-keylock in the next version?

3)also, when i press menu. by default, it goes to the middle icon. on one of the skins from before, it started default on the top left. i'm used to that..is it possible to get that back via a seem edit or someting?

4) The voice record is really handy, but is there a way to make it playback, via speakerphone? instead of just softly?

Nice work none the less! Keep it up!

1) seem 0032_0001, offset 40, bit 6: SMS storage (0 for phone, 1 for SIM)

2) no, I don't think so

3) I also have v4 and it goes to top left. but I use a different customized skin... I'm not sure on this one

4) no

Posted by: k3nnis

Quote:

Originally Posted by shanku

Just change your skin .....

Hi.

Thanks for that.

Cheers,
Kenn.

Posted by: deeps7

Quote:

Originally Posted by djdano

1) seem 0032_0001, offset 40, bit 6: SMS storage (0 for phone, 1 for SIM)

so there is no way to get it to come up as a menu option?!

Posted by: deeps7

Quote:

Originally Posted by deeps7

so there is no way to get it to come up as a menu option?!

also wondering

1) what is "TTY Setup"?

i have a few options

voice
TTY
VCO
HCO

what are theY??

2)also, what exactly does battery save do?? I realise, it saves battery... but how?

3) What is the default security code for the e398? ..and just out of curiosity..how many attempts do u get at the security code? what hapens after? i know for a sim card, u get 3 attempts? and then u need a PUK..after which they lock u out of the sim. surely they don't lok u out of a phone?

Posted by: wutupscott

ei i want to flash my v398 ver.3 to v398 ver.4 but pst cant detect my e398...mpt can detect my phone but not with pst6.7... what should i do?

Posted by: deeps7

Quote:

Originally Posted by wutupscott

ei i want to flash my v398 ver.3 to v398 ver.4 but pst cant detect my e398...mpt can detect my phone but not with pst6.7... what should i do?

another thing, that would be very hadny and likely easy to implement...is the ability to have a shortcut to the flash.

I use it as a flashlight sometimes, and it'd be really easy to just press "menu+5" for example, to light up...instead of pressing camera...waiting for it to laod, and then goin through the menu.

Posted by: djdano

Quote:

Originally Posted by deeps7

shortcuts can be assigned by holding the menu button while the item menu is highlighted. i don't know if you can assign a shortcut for the flash, my phone is charging at the moment

as far as I remember from older threads, the battery save option has something to do with the earpiece volume... a search here on HoFo might clear that up for you.

as for the sms storage, i don't think that you can put a entry in the menu; you might try though using p2kmenueditor...

wutupscott - make sure you have the drivers properly installed; as a last resort, try unistalling PST and the drivers for motorola and then reinstall the program.

EDIT: wow, 50 pages. cheers once again, eyesonly

Posted by: deeps7

Quote:

Originally Posted by djdano

shortcuts can be assigned by holding the menu button while the item menu is highlighted. i don't know if you can assign a shortcut for the flash, my phone is charging at the moment

nope, it says shortcut can't be assigned for this item :S

it'd b very handy imo... some nokia's have it , so that if u hold down star, the torch lights up.

shoudl be easily accessible imo

Posted by: deeps7

Quote:

Originally Posted by deeps7

nope, it says shortcut can't be assigned for this item :S

it'd b very handy imo... some nokia's have it , so that if u hold down star, the torch lights up.

shoudl be easily accessible imo

guys, this is urgent...my mate has SP2 installed, and i remember reading somewhere, that you can't install it with SP2 installed..is this correct???

is there a loophole?

Posted by: IronRush

Hey mates...
I dont like only one thing. I take a picture with him, but when I put how wallpaper, they not stay fullscreen anymore. Have a way to fix it or not ??
Thank you.

Posted by: teknek

My computer wont connect to my phone - I started having when I upgraded my computer from xp home to xp pro. To try to fix this, I removed all three programs (MPT, PST & P2KTools), and uninstalled the phone from Device Manager and also removed it from Modems.

Then I have installed in the following order, MPT, PST, & P2KTools; I connected the USB cable to the phone and then to the computer - It finds the phone, installs the drivers - The phone connects in MPT and in 'AT Mode' on P2KTools. The phone doesn't connect in 'P2K Mode' and in PST. I tried a V300 on my computer and that works fine - fully connects/flashes and works in MPT, PST, & P2KTools.

When I connect the E398 (after installed as a modem) I open P2Ktools, and it shows the install hardware icon and fails to install some driver - When I go to Device Manager, I see some driver has not been installed properly and it gives me "USB Composite Device"

I tried to replace the 'usber.sys' file as mentioned in some guide, but that didnt help. Anyone got any help they can give me?

Posted by: abugibugi

V4 is a great monsterpack. However, here are the issues I found:

1. I seems to lose all my picture & voice Name configuration in phonebook from time to time. I can't narrow down what triggers it but taking out the battery doesn't make it happen.

2. After flashing with Complex Chinese language pack, the phone hangs in "Please wait" mode when I try to go into phonebook in Chinese mode.

Posted by: Neo519

In another thread, it looks like canadian users are having problems connecting to Rogers or Fido with the v398 mp.

Can anyone confirm this? Today I got -42db while driving to work using the country roads. But I still couldn't make a call.

Posted by: djdano

Quote:

Originally Posted by IronRush

Hey mates...
I dont like only one thing. I take a picture with him, but when I put how wallpaper, they not stay fullscreen anymore. Have a way to fix it or not ??
Thank you.

settings >>> personalize >>> wallpaper >>> layout = fit-to-screen

Posted by: djdano

Quote:

Originally Posted by deeps7

guys, this is urgent...my mate has SP2 installed, and i remember reading somewhere, that you can't install it with SP2 installed..is this correct???

is there a loophole?

i know some people that have succeeded installing both p2kman and PST. try searching the threads for any clues on special stuff you have to do.

Posted by: deeps7

Quote:

Originally Posted by djdano

i know some people that have succeeded installing both p2kman and PST. try searching the threads for any clues on special stuff you have to do.

problem with the search function here is, that if i type in sp2 , or even service pack 2.. it wil tell me the THREAD that it is mentiond.

unfortunately, these threads are 50 pages each, which is a real hassle to look through to find this tiny bit of info!

unless there's a modified search which i'm unaware off?

Posted by: catchmeda

hi there..

juz now i flashed the v398 monster. its pretty good.. i got a problem with the mp3 player located in the GAMES & APPS group.

when i start the mp3 player program...it says..LOADING...after that it says UPDATING MUSIC DIRECTORY.. the program stands there forever. not moving to the next level..

what should be the problem?
when i flash it it doesnt gives any error..

???
thiyags

Posted by: djdano

Quote:

Originally Posted by catchmeda

hi there..

juz now i flashed the v398 monster. its pretty good.. i got a problem with the mp3 player located in the GAMES & APPS group.

when i start the mp3 player program...it says..LOADING...after that it says UPDATING MUSIC DIRECTORY.. the program stands there forever. not moving to the next level..

what should be the problem?
when i flash it it doesnt gives any error..

???
thiyags

the mp3 player is not so good, there are some bugs, it searches for audio files on both phone and card. use the default sound player, it's much better. you can make playlists, minimize it and it takes almost no time for loading.

Posted by: djdano

Quote:

Originally Posted by deeps7

try searching for "install PST" or "installing PST" or "install p2k".

also make sure you check the "display results as posts" so you can easily see if that post is good for you.

the instructions on installing PST are the same for most new Motorola models, so don't worry if you find the instructions on a V300 or V635 thread.

Posted by: catchmeda

Quote:

Originally Posted by djdano

hi ..thanks for your response.

i think its trying to synch from the trans and thats why its hanging out there..
let me try the best

byebye

Posted by: lica

Hi ,
I have a 398 too, and I want to make the upgrade. Please if somebody can help me with the pst 7.1 patched file, I don find on the net. and the steps....

Thanks.
laurentiu.opritescu@medist.ro

Posted by: IronRush

Quote:

Originally Posted by djdano

settings >>> personalize >>> wallpaper >>> layout = fit-to-screen

Thank you so much man.

Anyone knows about the Monster Pack v5 release day ??

Posted by: djdano

Quote:

Originally Posted by IronRush

Thank you so much man.

Anyone knows about the Monster Pack v5 release day ??

IMO it will not be any time soon, cause the v4 is very good so far. and i believe that eyesonly is on vacation at the moment...

Posted by: IronRush

Quote:

Originally Posted by djdano

IMO it will not be any time soon, cause the v4 is very good so far. and i believe that eyesonly is on vacation at the moment...

You are right man. MP v4 is really good.

Posted by: catchmeda

Do i need a driver after enabled the USB Memory Card settings?

coz i plugged the 398 in my friend machine.. its asked for the driver.

what do i do for that?

thiyags

Posted by: yvliew

I don't think u need driver. I've tried it on my PC which I never installed any PST or motorola stuffs.. It works right away... Detect as removeable drive.... WinXP

Posted by: djdano

Quote:

Originally Posted by catchmeda

Do i need a driver after enabled the USB Memory Card settings?

coz i plugged the 398 in my friend machine.. its asked for the driver.

what do i do for that?

thiyags

if you want to access the memory card then you don't need a driver, just plug the cable while the usb setting is set to "memory card" and you should be able to access it either through MPT or see it as a separate drive.

if you want to acces the phone through PST or p2k programs then you have to install the drivers that came with these programs.

Posted by: catchmeda

Quote:

Originally Posted by djdano

thanks for the replys..
it works fine with XP not with Win98.
also when i forward a SMS..the phone automaticaly adding the letter
"FWD: MSG:" in the beginning of the message.. how do i disable it?

Posted by: loko__loko

hi, anybody tested a 256mb TF on their e398 v4?

seem i cant get it to work

thanks

Posted by: stj2000online

Quote:

Originally Posted by catchmeda

...it works fine with XP not with Win98...

Quote:

Originally Posted by loko__loko

hi, anybody tested a 256mb TF on their e398 v4?

seem i cant get it to work

thanks

I can't test it because I don't have one, but I think somebody here on HoFo posted you need to format the card through the phone menu after installing it. Better search the forums...

Posted by: TimVFR

Quote:

Originally Posted by stj2000online

In order to make it work on Win 98 you need the USB port drivers installed on your system (supplied with your mainboard) and you must restart the PC every time after plug in the USB cable in the phone because Win 98 is not able to automatically detect/install new drives.

I can't test it because I don't have one, but I think somebody here on HoFo posted you need to format the card through the phone menu after installing it. Better search the forums...

I have the V4 flash in my E398, and have installed a 256MB transflash card without any problems. I even forgot to format it in the phone, but it is working.

Posted by: loko__loko

the mp3 are in the TF, but once i place the TF inside the phone, the mp3s cannot be detected.

ill try to find a way to format the TF using the phone

thanks

Posted by: Splint-R

Hmmss, I live in the Netherlands and i have an T-Mobile E398 With T-mobile stuff on it, so can i flash it with this pack??

Posted by: Neo519

Hi All,

I can make calls sometimes now, it is weird. Someone have the mod to disable 850 support? I tried the Xlr8 guide, the "50" offset isn't really clear to me. Or can someone just post the seems with the edits done. This is the only seem edit that I can't get working, I get no reception when I do this mod.

Thanks

Posted by: catchmeda

This V398 stuff stored almost 80 sms's... i removed the sim card to copy the address books from my old sim. after changed the sim..the SMS which i had in the mobile is gone. only it showed me 22 SMS's which was stored in SIM.

???
THIYAGS

Posted by: Simuki

Anytime you put new sim card in your phone it will erase all sms stored in phone memory. Sony ericcson phones have that problem too. You can change sms storage to sim or like it happened you ll loose sms if u change sim.

Posted by: savaa

Good one Eyesonly ..
I recently upgraded to Monster PAck V4. Its amazing and thanks to Eyesonly.

I have two issues.. i think the battery back seems to be less that what i had before.

My headphone doestwork with phone . I can listen to songs but i can't pick up calls using it. Any Idea.

What is TTY setup in the settings? What is that used for?

Next one; What is mobile QQ is for?

Posted by: shanku

Quote:

Originally Posted by savaa

Good one Eyesonly ..
I recently upgraded to Monster PAck V4. Its amazing and thanks to Eyesonly.

I have two issues.. i think the battery back seems to be less that what i had before.

My headphone doestwork with phone . I can listen to songs but i can't pick up calls using it. Any Idea.

What is TTY setup in the settings? What is that used for?

Next one; What is mobile QQ is for?

Yes I am also face this problem .. Another problem is engineering at office tool menu ... any one tell me what is this ????
please... thanks

Posted by: Splint-R

I Flashed my Dutch T-Mobile e398 and everything went good. It is much faster now

Thanks Eyesonly for this Monster Pack

Posted by: Splint-R

I flashed my phone with the new V4.

When i start my phone the ''intro sound'' is too long, the sound is still playing when everything is loaded, is that normal ?

When i shutdown my phone the ''shutdown sound'' cant play till the end, i hear it 2 seconds and then my phone is off ??

Am i the only one with this ''sound problem''?

[Edit]

I Found Another thing on my phone when i go to the personal settings and presh screen saver, nothing happens i just goes 1 menu back ?

Posted by: gunther3

I have the same issue. but i think its normal. i flashed when it first came out.. (thank you eyes) and i love it. anyhow i was wondering since i am a newbie on this forum there is another thread saying this e398 9cr monster pack was better..
anyone can confirm this?
thanks

ref: http://www.howardforums.com/showthread.php?t=669308

Posted by: djdano

Quote:

Originally Posted by shanku

Yes I am also face this problem .. Another problem is engineering at office tool menu ... any one tell me what is this ????
please... thanks

read this and things might clear up a bit

Posted by: djdano

Quote:

Originally Posted by gunther3

I have the same issue. but i think its normal. i flashed when it first came out.. (thank you eyes) and i love it. anyhow i was wondering since i am a newbie on this forum there is another thread saying this e398 9cr monster pack was better..
anyone can confirm this?
thanks

ref: http://www.howardforums.com/showthread.php?t=669308

for the menu speed and overall performance, both monsterpacks are about on the same level. some people say that the 9CR MP is a bit faster, but the problem is that you will have to seem edit to have all the extra options that you get as default on the V398 MP. so if you have no or little experience in seem editing and file management, stick with the V398.

Posted by: Splint-R

How can i fix the '' Personal Settings > Screensaver '' Thingy?

And the ''Sounds'' Thingy?

Posted by: gunther3

Quote:

Originally Posted by djdano

thanks for clearing things up. hopefully eyes will come up with a v398 v5. and that would settle things once and for all! thanks eyes you the man!!
i also ended up seem editing a few things to make it more personal on my v398. also the skins i changed three out of the six that were included. so aside from moto, invXenonAB, and light blue, i have included on my phone motomodders 1.0, blu 3.0, and nviadia. obviously changing the wp and ss to some more that i thinks matches..

Posted by: djdano

Quote:

Originally Posted by Splint-R

How can i fix the '' Personal Settings > Screensaver '' Thingy?

And the ''Sounds'' Thingy?

i think you have deleted some images and sounds... and not in the correct manner, too.

i you have backed up the files, you're lucky. just put them back where they where, then go read how to safely delete sounds/pics and then proceed to deleting.

if you don't have a backup, search how to fix your phone, there are a few threads on this subject, and there is more than one solution.

good luck.

Posted by: sav2003

hello,I upgrade my e398 to v398 and unicode in sms is enabled..I am not able to disable it with P2Ktools.So,i am debited the cost of an SMS every 70 characters....Before the updrage was 160 characters ...

Posted by: BeneJoe

Quote:

Originally Posted by sav2003

hello,I upgrade my e398 to v398 and unicode in sms is enabled..I am not able to disable it with P2Ktools.So,i am debited the cost of an SMS every 70 characters....Before the updrage was 160 characters ...

Yes, the same problem here...that's vhy i've just deleted it.
Plus i had no receipt function when sending an sms . Is it possible fix these little problems by seem editing?

Posted by: sav2003

The reciept function can be enabled with P2Ktools........But unicode in SMS so that i i am not debited the cost of an SMS every 70characters,but every 160,cannot be disabled with p2k...You said u have deleted the upgrade ?how? you installed again the older version?Where did u find it ?

Posted by: BeneJoe