vB Easy Archive - cf62t housing removal

Pages: 1

cf62t housing removal
(Click here to view the original thread with full colors/images)

Posted by: russellbeermann

anyone know how to remove the housing of a cf62? thanks

Posted by: Paolo

to take apart the CF62, follow this:
Take off the 3 screws, one is covered by a rubber plug, then threre is clips on the side, which come off by just pressing the housing be carefull not to press too hard, you can crack it, then it just peels right away, for the LCD its a bit tricky, take off the plate where the fido logo (may be a different logo for US) and there is 2 screws behind it as well, take them out, and just slowly pry it open untill you see where the clips are, they are arround the LCD, one is on the top, and about 2 on each other side, then bam, its out.

Posted by: CellularCid

Also note that Siemens use torx 5 screws, not torx 6 like most other cellphones. So you'll need a torx 5 screwdriver to get it open.

Posted by: ednacell

Quote:

Originally Posted by russellbeermann

anyone know how to remove the housing of a cf62? thanks

Goto http://people.itu.int/~emartine/how...mens_phones.htm How to open almost all Siemens fones you will find pictures with instructions.