vB Easy Archive - OPCode Menu?

Pages: 1

OPCode Menu?
(Click here to view the original thread with full colors/images)

Posted by: Scotsman828

Anyone here familiar with the OPCode Menu? I need some instructions how this works and what type of changes can be made with this feature. Thanks to anyone who can help.

Posted by: SharkExE

OPCode Menu is a special menu for entering opcodes which can make changes in your seem's or test phone in different ways(for example turn all pixels on, turn on vibro)
To enter opcode menu press MENU button and then quickly 048263*. There will be Opcode menu on display.
Now enter some of these codes:
for all these codes first enter 54*
54* Suspend Required for all Operations

0*0*0 Select tone 0

0*0*1 Select tone 1

0*0*2 Select tone 2

0*0*3 Select tone 3

0*0*4 Select tone 4

0*0*5 Select tone 5

0*0*6 Select tone 6

0*0*7 Select tone 7

0*0*8 Select tone 8

0*0*9 Select tone 9

0*0*124 Select tone 1 KHz

0*0*125 Select tone 2 KHz

0*0*126 Select tone 3 KHz

0*0*127 Select tone 4 KHz

0*1*X Disable tone X

3*0*1 Enable vibrator

3*0*0 Disable vibrator

4*3*1 Enable speech coder full rate

4*3*0 Disable speech coder full rate

4*4*1 Enable speech coder enhanced full rate

4*4*0 Disable speech coder enhanced full rate

4*5*1 Enable speech coder half rate

4*5*0 Disable speech coder half rate

5*0*0 Set audio level 0

5*0*1 Set audio level 1

5*0*2 Set audio level 2

5*0*3 Set audio level 3

5*0*4 Set audio level 4

5*0*5 Set audio level 5

5*0*6 Set audio level 6

5*0*7 Set audio level 7

5*0*8 Set audio level 8

5*0*9 Set audio level 9

5*0*10 Set audio level 10

5*0*11 Set audio level 11

5*0*12 Set audio level 12

5*0*13 Set audio level 13

5*0*14 Set audio level 14

5*0*15 Set audio level 15

6*2*2*0*0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute

6*4*6*0*0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute

10*0*3 Set band GSM 900

10*0*4 Set band DCS 1800

10*0*5 Set band PCS 1900

10*0*6 Set dual band GSM 900 / 1800

10*1*0 Read band (3= GSM 4= DCS 5= PCS 6 =GSM/DCS)

18*0 Initialize non volatile memory (Master Reset)

18*1 Initialize Non volatile memory (Master Clear)

20*X*0 Load Channel number X

20*1*0 Load channel number 1 GSM Low channel

20*62*0 Load channel number 62 GSM Mid channel

20*124*0 Load channel number 124 GSM High channel

20*512*0 Load channel number 512 DCS Low channel

20*700*0 Load channel number 700 DCS Mid channel

20*885*0 Load channel number 885 CDS High channel

20*512*0 Load channel number 512 PCS Low channel

20*661*0 Load channel number 661 PCS Mid channel

20*810*0 Load channel number 810 PCS High channel

55*2*001 Test Display. All pixels ON

55*2*000 Test Display. All pixels OFF

55*2*002 Test Display. Checkerboard pattern A

55*2*003 Test Display. Checkerboard pattern B

55*2*004 Test Display. Border pixels ON

And one of the codes which can make changes in seem's:
TURN ON "FEM"
Opcode "47" "OK"

Field 1 "50" "OK"

Field 2 "1" "OK"

Field 3 "68" "OK"

Field 4 "1" "OK"

Field 5 (D) "183" "OK"

After this opcode you must restart the phone.
Now you have an ingeneering menu on your mobile.

If there will be questions, ask....

Posted by: rivvah

Wow, thanks for the great list -- best I've seen yet. Do you know of any other OpCode "47" entries to edit more seems? I didn't even know you could do that...

Posted by: Paolo

very informative post

Posted by: 30585

newb question, what phone/ s does this work with?

Posted by: Scotsman828

Thanks alot! great info. Unfortunently the 47 opcode doesn't work on my V810 CDMA phone. Any ideas how to get the engineering menu on CDMA phone? My idea was to use opcode to enable USB tranfer of ringtones and images on my phone. I cannot get any of the software programs to read my V810's filesystem.
This should be made a sticky!

Posted by: Scotsman828

Anyone else wanna add to this? This would make a great knowledge base.

Posted by: SharkExE

I Know a lot of Opcodes for moto, but unfortunately i have no time now to post them all...
Maybe later when exams at school will end...
Wait and add smth to my information!!
WAIT...

Posted by: Scotsman828

OK, I'm waiting.

Posted by: bobzilla2

me too

Posted by: Aircraft800

O.K. This ALL looks very interesting. Now, can someone please add some detail on what this exactly does? I can get into the OPCode Menu, and enter the OP Codes, ex. 54*0*0*0 … hit OK, and it says SUCCESS. What does that mean? “Select Tone 0” is a SUCCESS? It works properly? I didn’t hear anything or see anything? Do I need to disable anything when I am done? Phone restarts itself afterwards and everything seems O.K.

Did I miss something?

Posted by: shugasmax

How quickly do you have to press the keys?
I've tried this enough times to where I feel like I'm playing Mortal Kombat on my razor

Any hints on what I'm doing wrong. All I want to accomplish (for the time being) is reseting the 4-digit unlock code (I forgot a four digit pin *lame*)

Posted by: sigloIV

Quote:

Originally Posted by shugasmax

How quickly do you have to press the keys?
I've tried this enough times to where I feel like I'm playing Mortal Kombat on my razor

Any hints on what I'm doing wrong. All I want to accomplish (for the time being) is reseting the 4-digit unlock code (I forgot a four digit pin *lame*)

you dont need opcodes to reset the unlock code if you know the security code, just go through the change pw menus like normal, change unlock code, and then when you have to type in the existing one, press the menu button and it will switch to "enter security code", put in the security code, OK, and then your new unlock code.

Posted by: DJester

Quote:

Originally Posted by sigloIV

Security code is by default 000000 (for most phones/providers)

Posted by: tequanne

Quote:

Originally Posted by SharkExE

I Know a lot of Opcodes for moto, but unfortunately i have no time now to post them all...
Maybe later when exams at school will end...
Wait and add smth to my information!!
WAIT...

waiting...

Posted by: cvill

Quote:

Originally Posted by tequanne

waiting...

What he said.

Anyway, does this work on the L6 as well? I've tried but can't get the opcode menu. The C651 did, no problem.

Posted by: kintamanate

13 posts from 2005?

Don't hold your breath guys, I don't think he's coming back.

Maybe he failed his exams, got kicked out of school..had to move back to the countryside where there is no internet. Maybe he really did want to help, but with all the cows and chickens to tend to, had no time to go into the city to upload those 'lots of op codes' that he knows.

Posted by: jet2006

hi, the opcode works on some models, there is a seem to enable it, look at the seem table list. I think it works under certain firmware also, it works on my v635 when i last played about with it. the opcode fun only lasts a while and its easier with p2k progs. since u need to have the list of codes anyhow for modding to hand.