vB Easy Archive - Need assistance...

Pages: 1

Need assistance...
(Click here to view the original thread with full colors/images)

Posted by: StMaSi

I just finished flexing and flashing my V300 to V3 (I used SE7495AXXH1082.hs for the flex and TRIPLETS_G_0B.09.45R_reflash.shx for the flash) and all appeared to go well with no errors, but I have run into a bit of a snag. I have no volume on any of my audio files. When I press the buttons on the side of the phone, I can hear the beeps and when I move the volume up and down, I can hear the increase and decrease beeps, but when I call my phone, no ringtone will work. In addition, when I go into my sounds and attempt to listen to any sound, I can see the progress indicator moving from left to right as if the audio file was playing, but no sound. Also, when I make a call, I cannot hear anything at all. Could it be something as simple as a corrupted gain table or something like that? Help?! Any assistance will be greatly appreciated! Thanx.

Posted by: 01oo001

yeah sounds like a busted gain_table.bin file, just replace it from a backup!

Posted by: StMaSi

Crap.

Deleted the gain_table.bin and restored from backup, but still not working.

Any other ideas?

Thanx.

Posted by: gunther3

try edit your gain tables with motokit or similiar.
try turn it off then back on. does the start up work?
why not use back up to reverse the problem and try reflashign again. i dont have a 300 so never heard of the MP. has anyone else exp this .. check the thread

Posted by: StMaSi

Well...with motokit, I'm only able to find a Chinese version (I think), so, needless to say, don't want to just click on buttons and see what happens.

Edited my gain table, but no difference.
Turned it off and back on. I hear the startup sound, I can hear the volume increase and decrease sounds. Even though I can hear those sounds, I am unable to hear any ringer sounds. It appears to be the earpeice speaker that is producing no sound.

Tried restoring, but to no avail...still same problem.

Tried reflexing and reflashing. Although I still get no errors and it succeeds, I cannot fix my sound problem.

Any other ideas?

Thanx.

Posted by: gunther3

um there is a language change option in moto kit.. forgot where it is.. but try do a search in hofo i recall someone made instructions how to change it to english.

anyhow click on the third option from the left. go the the second option then select the first option. that should change it to english.

so
alt o
alt l
then you should see english.. you gotta play around with the prog.. cant help you everytime buddy.

Posted by: tritiumdotca

alright, I have the same problem right now, I flashed with the latest 75r triplets, and flexed with the same v3 bare. I've been looking into this problem for a couple hours and tried a number of things, unfortunetely none have worked. Here is what I have tried, right after flex/flash i used motokit to fix ringtones, that's when I noticed the issue, after reset and upload of ringtones, none of the ones I added back seemed to work (used MPT) even though I had them all on my phone before. There where 4 basic RT (classic continental, att., siren) that where there from the flex and they play fine. I tried deleting the tonedb, etc. using both pk2tools and commander, and re-adding sounds, nothing. They seem to show up in the multimedia section under sounds, but again they play but with no sound, in fact I can hear the sound of the stop button (down arrow while playing) but not the ring tone. I'm thinking it's not a simple corruption from the fact that OP reflashed. I'm going to throw another flex on (maybe v600) and see how it turns out.

Oh yes and OP if you solved this, let me know how I like the amount of free space and simplicity of the V3 bare