I'll keep it short because i went ballistic when i fryed my phone. There are several methods (i know 3):
Usable only when windows will give you "Usb device not recognised..." crap
1.Unplug the data cable, remove the battery, put the battery back and press *, # and power all together.
2. If the phone won't start with the above combination than:
a). remove the battery
b). create a short circuit between pins 4 and 5 from the phone's bottom
(counting starts from right to left, keypad up).
Slide slowly the battery in its place but DON'T put it back in yet. MAke shure you have the shortcircuit in place and than push the batter slowly inside. Keep the short circuit in place for a few more seconds . You'r phone booted in flash mode now.
3."- Remove the battery, then plug in USB cable with MFF running.
- Hold the buttons on *+#+ON (same as accessing bootloader mode).
- Without releasing those buttons, slight the battery in and wait for few seconds.
-The bootloader screen will turn on. "
Good luck .. you'll need some if you are using this stuff.
Posted by: RamSet
Btw it works on all p2k motorola phones
Posted by: tvrtkod
Quote:
Originally Posted by RamSet
Btw it works on all p2k motorola phones
I'm not beying picky or something but can you explain where can i find pins 4 and 5 on the V3, V360 and V635.
So i would say it does not work on all p2k phones.
Posted by: RamSet
true .. my bad. So i guess it works on p2k motorola phone with pins :P Sorry .. I was so excited that i resurected my phone that i typed soething wrong .. editing it right now
