vB Easy Archive - V3i MEdia Net & MMS Success--Instructions & Settings Here!

Pages: 1

V3i MEdia Net & MMS Success--Instructions & Settings Here!
(Click here to view the original thread with full colors/images)

Posted by: stream

I got my unlocked/unbranded V3i last week and since it appears to be set up for a Chinese cellular service, internet connectivity and multimedia messaging wouldn't work. I decided I wasn't adventurous enough (yet...

) to use P2Ktools, etc. so I first went to the Cingular site referenced elsewhere on this site where you input your phone number and you're supposed to get a text message with MEdia Net settings, and another for MMS. It didn't work for me--and I tried it a few times.

I called Cingular customer support and spoke to a very helpful woman who said 50% of the people don't have success with that text message thing, and sent me to this site:
https://onlinecare.cingular.com/dev...r&deviceId=7410

This site has tutorials on lots of different topics, by phone.

For MEdia Net (and general browser connectivity), select browser/internet as category, and browser settings as tutorial. Instructions are in the box below on that page, but the menu navigation on my phone was a bit different. Go to main menu, extras, web access, web sessions. My phone had half a dozen selections that were set up for another network, which is why I couldn't connect. Select new entry and populate with the following:

* Name: MEdia Net
* Homepage: http://device.home
* Service Type 1: WAP
* Proxy 1: 66.209.11.61
* Port 1: 9201
* Domain 1: Blank
* Service Type 2: WAP
* Proxy 2: 000.000.000.000
* Port 2: 9201
* Domain 2: blank
* DNS 1: 000.000.000.000
* DNS 2: 000.000.000.000
* Timeout: 15 minutes.
* CSD No 1: blank
* Username: blank
* Password: blank
* Speed (Bps) 1: 9600
* Linetype 1: ISDN
* CSD 2: Blank
* Username 2: Blank
* Password 2: Blank
* Speed (Bps): 9600
* Line Type 2: ISDN
* GPRS APN: wap.cingular
* Username: WAP@CINGULARGPRS.COM
* Password: CINGULAR1
The last 2 items are in all caps. Then save the web session, and set as default (access that menu with the - key, which is between the 2 soft keys at the top of the keypad).

For MMS settings, select picture messaging as category, and configure MMS settings as tutorial. I've listed the settings below, and since most of them are the same as the MEdia Net settings, I copied the MEdia Net web session to a new one called MMS and then only had to modify a few of the settings, rather than input them all again. To copy, navigate to your MEdia Net web session, press the - button, copy entry, and copy it to MMS). Then select the MMS web session, press the - button, then select edit, and modify the appropriate values (the items in bold below are the only ones you need to modify).

*Name: MMS
*Homepage: http://mmsc.cingular.com
*Service Type 1: WAP
*Gateway IP: 66.209.11.61
*Port 1: 9201
*Domain 1: blank
*Service Type 2: WAP
*Gateway IP 2: 000.000.000.000
*Port 2: 0
*Domain 2: blank
*DNS 1: 000.000.000.000
*DNS 2: 000.000.000.000
*Timeout: 10 Minutes
*CSD no 1: Blank
*Username: 1: blank
*Password 1: blank
*Speed (Bps) 1: 9600
*Line Type 1: ISDN
*CSD no 2: blank
*User Name 2: blank
*Password 2: blank
*Speed (Bps) 2: 9600
*Line Type 2: ISDN
*GPRS APN: wap.cingular
*User Name: WAP@CINGULARGPRS.COM
*Password: CINGULAR1
Then complete the remaining steps in the tutorial (I needed to modify a few more settings on my phone).

You should now have MEdia Net (and general browser) access, and MMS capability.

Being a noob at cell phone modding, I felt more comfortable doing this manually instead of using P3KTools.

If anybody has a link to a tutorial on how to use P2KTools, seem editing, etc. please provide it for the benefit of us noobs.

Posted by: OmegaWave

I think all of these settings have been posted in the Cingular FAQ forum for quite awhile now.

Posted by: XxDustin82xX

AWESOME!! I tried forever to get my internet and MMS working and had no luck. I did something like what you did before but I had no luck. The settings were different but the ones you have worked perfect thanks alot

Posted by: djdownhill

Quote:

Originally Posted by OmegaWave

I think all of these settings have been posted in the Cingular FAQ forum for quite awhile now.

Yup. Old news and this has been posted dozens of times in these Moto forums as well.

As for P2ktools look in the Wiki for some guides. But you have to use P2KTools 8.0.6 in order to see all the partitions of the V3i.

Posted by: scottjhl

Quote:

Originally Posted by djdownhill

Got a link that I can download that from...?

AND YES THIS HAS BEEN POSTED WAY TOO MANY TIMES... PLEASE SEARCH NEXT TIME BEFORE POSTING A NEW THREAD...omg...lol sorry for the rant

Posted by: djdownhill

Quote:

Originally Posted by scottjhl

Got a link that I can download that from...?

http://www.motox.info/

Look in the Hacking Reloaded forum in the Motorola Software Downloads sticky!

Posted by: phoneilliterate

I tried this, but it doesn't work. I suspect that it is because I am a legacy AT&T customer with an AT&T SIM - not a Cingular SIM. Does anyone have experience with that? Are there different user names/passwords?

Thanks!

Posted by: dsburto

Well I got all that stuff loaded and my MMS is working and so is my MEdia...however my standard text messaging will not work...what gives with that?

Posted by: yodicken

phoneilliterate,
I had the same prob. I was a legacy ATT wireless customer and bought an unlocked V3. The ATT card will not work for internet and MMS with the V3. You need to switch to a Cingular card.

Posted by: troyboy30

not too bad just 6 months or so late?

Posted by: sugill

I bought an unbraded V3i and tried to use my at&t sim, everything worked except internet browsing. these are the settings i used to get it to work.

Name: Mmode
Homepage: http://home
Service Type 1: WAP
Proxy 1: 10.250.250.250
Port 1: 9201
Domain 1: <blank>
Service Type 2: WAP
Gateway IP 2: <blank>
Port 2: 9201
Domain 2: <blank>
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes
CSD No.1: <blank>
User Name 1: <blank>
Password 1: <blank>
Speed (Bps): 9600
Line Type 1: Modem
CSD No. 2: <blank>
User Name 2: <blank>
Password 2: <blank>
Speed (Bps) 2: 9600
Line Type 2: Modem
GPRS APN: proxy
User Name: <blank>
Password: <blank>

Posted by: julsan

Sugill those directions for setting up mmode worked for my unlocked RIZR Z3 too - thanks, I had to try @ 4 different settings before I found these. Now I just need to locate the right mms settings - joy...I can actually find the power button and much more

Posted by: outsider

I hate to bump and old topic, but I just got a cingular branded RAZR V3i and I'm trying to use the old AT&T Blue sim and these settings arent working... has something changed?

Quote:

Originally Posted by sugill

I bought an unbraded V3i and tried to use my at&t sim, everything worked except internet browsing. these are the settings i used to get it to work.

Name: Mmode
Homepage: http://home
Service Type 1: WAP
Proxy 1: 10.250.250.250
Port 1: 9201
Domain 1: <blank>
Service Type 2: WAP
Gateway IP 2: <blank>
Port 2: 9201
Domain 2: <blank>
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 15 minutes
CSD No.1: <blank>
User Name 1: <blank>
Password 1: <blank>
Speed (Bps): 9600
Line Type 1: Modem
CSD No. 2: <blank>
User Name 2: <blank>
Password 2: <blank>
Speed (Bps) 2: 9600
Line Type 2: Modem
GPRS APN: proxy
User Name: <blank>
Password: <blank>

Posted by: REAL

are those settings for mmode or media net because it says mmode but it should be for media net?

* Name: MEdia Net
* Homepage: http://device.home
* Service Type 1: Wap
* Proxy 1: 66.209.11.32
* Port 1: 80
* Domain 1: Leave Blank
* Service Type 2: HTTP
* Proxy 2: Leave Blank
* Port 2: 0
* Domain 2: Leave Blank
* DNS 1: 000.000.000.000
* DNS 2: 000.000.000.000
* Timeout: 5 minutes
* CSD No 1:Leave Blank
* Username: Leave Blank
* Password: Leave Blank
* Speed (Bps) 1: 9600
* Line Type 1: ISDN
* CSD 2: Blank
* Username 2: Leave Blank
* Password 2: Leave Blank
* Speed (Bps) 2: 9600
* Line Type 2: ISDN
* GPRS APN: wap.cingular
* Username: <leave blank>
* Password: <leave blank>

i got these from atts web site and they dont work

http://www.wireless.att.com/answer-...utionId=KB65160

i got the settings from the first post to work but the pages dont load right jus t weird text

Posted by: REAL

ive used every setting that i could find. http://www.wireless.att.com/answer-...utionId=KB65160

i used this and these still dont work. can anyone help?