Page 1 of 2 1 2 LastLast
Results 1 to 15 of 16

Thread: v3c help

  1. 04-05-2007, 12:31 PM #1
    bigdaddy911
    bigdaddy911 is offline I can dial without looking
    Join Date
    Apr 2007
    Posts
    8
    Phone
    razr v3c
    Carrier
    US cellular
    Feedback Score
    0

    Exclamation v3c help

    I went to update my Us cellular phone. I went to motorola's website to get the update software and when I went to update it, about 92% through the phone went to the helomoto screen and then back to the regular background screen and now it won't boot up, it will go from the hellomoto screen to the regular screen then the keys will lock up and it will then go back to the hellomoto and so on....... I took it to US Cellular today and the guy (who recomended me to this site) told me I need to do a completely re flash my phone to get it to work. someone please helm me get this to work as it is a work phone and no one can get ahold of me.
    Reply With Quote Reply With Quote
  2. 04-05-2007, 09:50 PM #2
    Mark_Venture's Avatar
    Mark_Venture
    Mark_Venture is offline Post Machine
    Join Date
    Dec 2002
    Location
    Wilmington, DE
    Posts
    14,269
    Phone
    Personal - Too Many.. see link in my signature
    Carriers
    Personal - Verizon Wireless (CDMA) |
    Feedback Score
    0
    Unless you have a US Cellular V3C MONSTER, you might not be able to recover. I haven't seen a US Cellular monster leaked yet.

    The Alltel firmware is very similar... and there is an Alltel V3C Monster at -> http://www.humpa.com/vzw/

    then see -> http://mark.cdmaforums.com/HowToFlash.htm

    THere is a US Cellular V3C UPGRADE available, so maybe flash the Alltel monster to recover, then the US Cellular upgrade?? NOT SUre.. I haven't done it so... proceed with caution... then again, since your phone doesn't work now.. I guess it can't get any worse??
    Verizon Wireless Customer Council Member
    Verizon PHONE Hacking Info & How To's click -> HERE, <-- If you have suggestions PM me
    Need Help? PLEASE POST IN THE FORUMS instead of PM'ing me!!
    Read -> An Open Letter to those who PM me for help!

    New to forums? -> Posting and you! <-a MUST Watch for all!!

    Equipment I Have/USE click here, Phone Labs Dock-N-Talk...
    Reply With Quote Reply With Quote
  3. 04-06-2007, 10:20 PM #3
    a1b2c3d4e5
    a1b2c3d4e5 is offline My antenna is smaller than yours
    Join Date
    May 2005
    Posts
    381
    Feedback Score
    0
    Bigdaddy, recovery is built into MSU. While turning on the phone, hold down * and # before you hit end/power, you should get into the bootloader (blue Motorola logo screen). Then start MSU again, it should ask you to start from scratch.
    Reply With Quote Reply With Quote
  4. 04-07-2007, 05:47 AM #4
    bigdaddy911
    bigdaddy911 is offline I can dial without looking
    Join Date
    Apr 2007
    Posts
    8
    Phone
    razr v3c
    Carrier
    US cellular
    Feedback Score
    0
    Quote Originally Posted by a1b2c3d4e5
    Bigdaddy, recovery is built into MSU. While turning on the phone, hold down * and # before you hit end/power, you should get into the bootloader (blue Motorola logo screen). Then start MSU again, it should ask you to start from scratch.
    I downloaded the file and my PC tell me that it is an unknown file and to look onto the web and I don't know where to go from there.
    Reply With Quote Reply With Quote
  5. 04-07-2007, 10:05 PM #5
    a1b2c3d4e5
    a1b2c3d4e5 is offline My antenna is smaller than yours
    Join Date
    May 2005
    Posts
    381
    Feedback Score
    0
    What? You downloaded what file?
    Reply With Quote Reply With Quote
  6. 04-08-2007, 02:46 AM #6
    bigdaddy911
    bigdaddy911 is offline I can dial without looking
    Join Date
    Apr 2007
    Posts
    8
    Phone
    razr v3c
    Carrier
    US cellular
    Feedback Score
    0
    the alltel flash. it is an SHX file and my Pc does not recognize that file.
    Reply With Quote Reply With Quote
  7. 04-08-2007, 08:13 AM #7
    Mark_Venture's Avatar
    Mark_Venture
    Mark_Venture is offline Post Machine
    Join Date
    Dec 2002
    Location
    Wilmington, DE
    Posts
    14,269
    Phone
    Personal - Too Many.. see link in my signature
    Carriers
    Personal - Verizon Wireless (CDMA) |
    Feedback Score
    0
    Quote Originally Posted by bigdaddy911
    the alltel flash. it is an SHX file and my Pc does not recognize that file.
    Correct. .SHX is a Moto firmware flash file, and your PC wont have any native support for it. You need to have the correct software installed, and even then that extension wont get associated. i.e. You'll have to launch the software, and then do a "File -> Open"... you'll never be able to just "double click" on a .shx file...

    The software you're going to need to flash with is copyright/warez... so don't ask for links to it, as its against the forum rules... But Google is your friend...

    See -> http://mark.cdmaforums.com/HowToFlash.htm

    Again... while the Alltel firmware appears to be SIMILAR... it may not be exactly the same as the US Cellular firmware... So, you might be able to recover, but the question remains... will you be able to get the phone active, and have all features working on US Cellular's service?

    Note: I'm unaware of anyone who has flashed the USCellular Upgrade firmware on top of the Alltel firmware... i.e. flash Alltel Monster to recover, then flash the US Cellular upgrade to get back to US Cellular's default firmware.
    Reply With Quote Reply With Quote
  8. 04-09-2007, 01:24 PM #8
    a1b2c3d4e5
    a1b2c3d4e5 is offline My antenna is smaller than yours
    Join Date
    May 2005
    Posts
    381
    Feedback Score
    0
    Bigdaddy, my recommendation is to try to restore using MSU. If you flash the Alltel load on your phone, MSU will probably not ever work again unless it also recognizes the Alltel load that you found..
    Reply With Quote Reply With Quote
  9. 04-09-2007, 01:57 PM #9
    bigdaddy911
    bigdaddy911 is offline I can dial without looking
    Join Date
    Apr 2007
    Posts
    8
    Phone
    razr v3c
    Carrier
    US cellular
    Feedback Score
    0
    how do I do this, since it is against the site rules can you please PM me the info?
    Reply With Quote Reply With Quote
  10. 04-09-2007, 03:27 PM #10
    Mark_Venture's Avatar
    Mark_Venture
    Mark_Venture is offline Post Machine
    Join Date
    Dec 2002
    Location
    Wilmington, DE
    Posts
    14,269
    Phone
    Personal - Too Many.. see link in my signature
    Carriers
    Personal - Verizon Wireless (CDMA) |
    Feedback Score
    0
    Quote Originally Posted by a1b2c3d4e5
    Bigdaddy, my recommendation is to try to restore using MSU.
    Not sure MSU can recover properly from a bad flash... I guess it depends on how wrong the flash process went...

    and I'm not sure if the UPGRADE type flash will be enough...

    Bigdaddy,
    MSU can't be used to flash .SHX files that it doesn't download from motorola... i.e. You can't go on your own and get a flash file linked from say -> http://www.humpa.com/vzw and use MSU to flash that firmware onto your phone... If you can... I haven't seen the writeup of how to yet... that is where the WAREZ programs I alluded to earlier come into play... they can flash your phone with these other firmwares.

    Right now... your first thing to try is like a1b2c3d4e5 suggested... Put the phone into boot loader mode, (by pressing/holding * and # keys while using the power button to turn the phone "on"... if that doesn't work... disconnect the USB cable, remove the battery, and hold those keys down while plugging the USB cable in.) Then try MSU and see what happens... hopefully it will try and flash your phone again with the proper firmware, and be succesful.
    Last edited by Mark_Venture; 04-09-2007 at 03:33 PM.
    Reply With Quote Reply With Quote
  11. 04-10-2007, 03:49 PM #11
    a1b2c3d4e5
    a1b2c3d4e5 is offline My antenna is smaller than yours
    Join Date
    May 2005
    Posts
    381
    Feedback Score
    0
    Quote Originally Posted by Mark_Venture
    Not sure MSU can recover properly from a bad flash... I guess it depends on how wrong the flash process went...
    I don't think you can get a build from MSU that could ever brick your phone. If the flashing process fails, the phone should boot up straight into the bootloader (even without *-#-PWR, at least on 3G/GSM), at which point MSU can still reflash the phone again.
    Reply With Quote Reply With Quote
  12. 04-10-2007, 04:01 PM #12
    Mark_Venture's Avatar
    Mark_Venture
    Mark_Venture is offline Post Machine
    Join Date
    Dec 2002
    Location
    Wilmington, DE
    Posts
    14,269
    Phone
    Personal - Too Many.. see link in my signature
    Carriers
    Personal - Verizon Wireless (CDMA) |
    Feedback Score
    0
    Quote Originally Posted by a1b2c3d4e5
    I don't think you can get a build from MSU that could ever brick your phone. If the flashing process fails, the phone should boot up straight into the bootloader (even without *-#-PWR, at least on 3G/GSM), at which point MSU can still reflash the phone again.
    MSU just does "upgrade" flashes.. not "Monster" type flashes on the CDMA side, or Flashes/flexes in the GSM world..

    US Cellular, the provider in Bigdaddy's profile, is CDMA.... and we've seen UPGRADE flashes brick CDMA phones before when using RSDLite and MultiFlashFlex... so anything is possible

    Just hope for the best... and try boot loader.
    Reply With Quote Reply With Quote
  13. 04-10-2007, 08:54 PM #13
    bigdaddy911
    bigdaddy911 is offline I can dial without looking
    Join Date
    Apr 2007
    Posts
    8
    Phone
    razr v3c
    Carrier
    US cellular
    Feedback Score
    0
    when I do a MSU it will get to 82% and the phone says flashing phone code then it will start up the phone before the update is complete.
    Reply With Quote Reply With Quote
  14. 04-11-2007, 07:32 AM #14
    Mark_Venture's Avatar
    Mark_Venture
    Mark_Venture is offline Post Machine
    Join Date
    Dec 2002
    Location
    Wilmington, DE
    Posts
    14,269
    Phone
    Personal - Too Many.. see link in my signature
    Carriers
    Personal - Verizon Wireless (CDMA) |
    Feedback Score
    0
    Quote Originally Posted by bigdaddy911
    when I do a MSU it will get to 82% and the phone says flashing phone code then it will start up the phone before the update is complete.
    Is that even when you try putting the phone in Boot Loader mode first? (by pressing/holding * and # keys while using the power button to turn the phone "on"...)
    Reply With Quote Reply With Quote
  15. 04-11-2007, 09:15 AM #15
    bigdaddy911
    bigdaddy911 is offline I can dial without looking
    Join Date
    Apr 2007
    Posts
    8
    Phone
    razr v3c
    Carrier
    US cellular
    Feedback Score
    0
    Quote Originally Posted by Mark_Venture
    Is that even when you try putting the phone in Boot Loader mode first? (by pressing/holding * and # keys while using the power button to turn the phone "on"...)
    Yes, I have no other way to do it but put it into boot loader mode because when I turn the phone on the keys will lock and the phone will go back to the hellomoto screen then back to the hellomoto screen etc.
    Reply With Quote Reply With Quote
Page 1 of 2 1 2 LastLast
« Previous Thread | Next Thread »

Bookmarks