Thanks all... Everything works great EXCEPT... VZ NAV... it says "There was a problem initializing the GPS. Please exit and restart VZ Navigator" i need that nav I have the premium plan... please guys...
i am having the same problem
maybe because we used the gps file when restoring with rsd cdma general
if this is the case, could someone (mark lol) please host the gps off their phone. thanks!!
to be honest i was very excited and misread and ended up restoring everything. lucky for me, everything is still working fine except that menu. would u be able to maybe supply me with your features file and then i can just put that one on my phone. again, im really new at this, so im unsure if that would be possible. is it possible anything else got messed up that i havent noticed? thanks again mark!!
WHEN EVER DOING SOMETHING LIKE THIS YOU MUST ALWAYS ALWAYS ALWAYS TAKE YOUR TIME AND FOLLOW THE DIRECTIONS (every word, even the fine print if there is any...) [edit] even those i spelled wrong [/edit]
There is a Reason to do it exactly as the guide states.
Some of the backups made with RSD CDMA General contain "user" SPECIFIC information... and a "generic" version can not be posted....
SORRY!!!!!
okay, so do u suggest i reflash and start from scratch?
also, is the gps file user specific because i am getting that same gps error.
thanks mark. sorry for not reading ALL THE WORDS!!!!
Thanks all... Everything works great EXCEPT... VZ NAV... it says "There was a problem initializing the GPS. Please exit and restart VZ Navigator" i need that nav I have the premium plan... please guys...
i am having the same problem
maybe because we used the gps file when restoring with rsd cdma general
if this is the case, could someone (mark lol) please host the gps off their phone. thanks!!
I need to talk to KBMAN some more (he has the phone)... this may be related to using the older (02.0B.09P) firmware...
Until then... You're welcome to try the process using the newer usc_v9m_02.0c.12p_prinn13635_monster_01.shx.zip and see if that fixes it... BUT You'd have to start the process over again...
okay...are there any known negatives to using this flash over the older one. everything other than the menu issue and gps is fine so i dont want 2 hav other problems with the newer flash. thanks for everything mark
okay...are there any known negatives to using this flash over the older one. everything other than the menu issue and gps is fine so i dont want 2 hav other problems with the newer flash. thanks for everything mark
KNown.. no... BUT as stated earlier... the unsuccessful EVDO data attempts done at KBMAN's house were with the .12 firmware... the successful attempts done at MY house were with the .09...
that is why the guide calls for .09.
Unknown to us at this point... was it something in the different firmware version? different software versions on his pc vs mine (I had older RSD CDMA General and older QPST.. not sure about the others)... or that I have GOOD EVDO both inside & out at my place.. EVDO at his place is "spotty" inside... so he had to go outside to get good EVDO signal...
BUT we did NOT know about the 275A hack for the M.IP when working with the .12 then... so that may FIX the .12...
in theory... you should be able to start at section 2. just re-use your QPST, RadioComm, and RSD CDMA Gen backups...
has any1 confirmed yet that the gps nav not only downloads but works. this is an important feature for me.
It did work on the .12 firmware, but when 1x data only was working... EVDO wasn't... (read the original thread disucssing the leak of the USCellular Monster firmware..)
thanks mark. can kbman confirm that the evdo data is working after that seem edit u discovered. i am willing to flash over to the newer version if evdo data is working and vznav is aswell. tahnks guys, u truley are the BEST
thanks mark. can kbman confirm that the evdo data is working after that seem edit u discovered. i am willing to flash over to the newer version if evdo data is working and vznav is aswell. tahnks guys, u truley are the BEST
No, I know he can not... he has not re-flashed to anything since we were successful...
We just spoke last night... our next step was to rule out variables in the unsuccessful EVDO data attempts... that meant... either 1. trying the process exactly as written using the .12 firmware... OR 2. un-installing all software from his PC... and installing the EXACT versions I have, then trying again...
BUT with both of us getting slammed at our jobs.. we're having difficulties getting together to work on this more... (he lives 30-35min drive, one way, away from me...)
okay, well im new at this so please if u cood explain exactly the evdo data. ino that i have evdo all the time because of the ev icon on my phone. will i not get the ev icon anymore? will data just be slower or not usable? im willing to step up and do it so....
also, how wood i no that evdo data is not working? thanks mark
You would know that EvDO isn't working if, when you have an EvDO signal(icon shows EV), your mobile web will give an Authentication failed error and will attempt to connect several times and then drop back to 1x(icon may or may not switch) and then connect.
kbman
Droid Bionic does GSM on US bands! (And open MIP profile too! )
If we knew what we were doing, they wouldn't call it research. - Albert Einstein
okay, and u think the seem edit cood potentially fix this. btw phone is flashing to newer firmware rite now on my other computer. so do the seem edit, and then select hybrid mode? evdo mode? how else shoodi test? thanks guys, ill keep u posted
okay, and u think the seem edit cood potentially fix this. btw phone is flashing to newer firmware rite now on my other computer. so do the seem edit, and then select hybrid mode? evdo mode? how else shoodi test? thanks guys, ill keep u posted
Run the process exactly as written.... only differnce.. the firmware version.
then when you have it all done.. try mobile web and see what happens...
Bookmarks