I'd swear I saw the file locations for this flash at http://mark.cdmaforums.com/FileLocs.htm a couple of days ago, with some of the graphic locations noted as unknown. Now the Verizon Razr2 V9M (USCC firmware) list is gone. Did we figure where all the usual graphics and sounds are yet or still looking?
NO TRACE of USC is what I am looking for also. As close as we can get to a "Special Edition" Verizon phone, with the Motorola UI of course.
I had not add them to the FileLocs page, but the Graphic and ring tones locations are the SAME as the E815 due to the Moto UI...
I still need to confirm a few things, like music file location, MicroSD locations, where are sounds/voice notes saved... and what folder names do you see when using BT OBEX FTP.
You sure your not thinking of what you saw on the bottom of -> http://mark.cdmaforums.com/FlipGraphic.htm
where I do state "not found" as USC isn't making use of custom versions of the startup/shutdown sounds or shutdown graphic... BUT based on other Moto UI phones... they should be the same... and if you place files named properly in those locations, the phone should probably use them...
Oh, and I wont call it Verizon V9M (USCC firmware)... I'll call it V9M (USC Firmware).... because basically we ARE using a V9M from US Cellular since we're using their Monster Flash file...
well i owe it to u guys, this phone is almost perfect in my eyes. iv looked and been unable to find, im sure u guys can help me with this last thing, and then i can help every1 and give back like u guys. i want to use the following public wap: http://wap.humpa.com/. iv been looking and cannot find anywhere how to configure this properly for the v9m. how can i add this to the websession in rsd general, i no 2 put it in the 3rd one, but how do i no wat to fill in for the rest of the info. thanks in advance. i cant say it enuff, u guys are amazing. im looking forward to helping others like u guys have!
were you using a "FREE" public proxy before?
If so, you'll have to set that back up again. So you'd need to know the proxy name and information...
For example.. I run my own HottProxy at home... so I have the values for User ID, Password, Gateway URL, and port... to enter into my BROWSER Settings file in RSD making the 3rd web session... when I use this web session, it points me to my WAP home page...
I haven't used Verizon's "pay for" Mobile Web yet... so I can't speak to using that with a custom WAP home page....
When I click in to the browser, it takes me to a page to enter either My Account, or sign up for wireless web. I then can't connect, even by telling it I want to sign up again. It gives me an unable to process request error.
Also, when I try to restore my RTT file, it says that it's an unrecognized file type, as with the other files before (the generics all work?).
My RTT gives me primary and secondary DNS 0 0 0 0
Username %M@vzw3g.com
Sorry I'm needing so much help.
btw, Sorry, I don't think i got to respond but... two of the 3 files you emailed to me were corrupted and unable to open/restore with RSD CDMA Gen...
IF the RTT Data is one that was corrupt and could not be properly restored... that is a BIG problem...
there is information at the bottom which is important and User/Phone specific... a Generic one will not work.
Has anyone used a different version of QPST besides v2.7 Build 231? I can not for the life of me find this version/build. I did however find v2.7 Build 247. Just wondering if anyone has had success with any other versions... Thanks!
You sure your not thinking of what you saw on the bottom of -> http://mark.cdmaforums.com/FlipGraphic.htm
where I do state "not found" as USC isn't making use of custom versions of the startup/shutdown sounds or shutdown graphic... BUT based on other Moto UI phones... they should be the same... and if you place files named properly in those locations, the phone should probably use them...
Oh, and I wont call it Verizon V9M (USCC firmware)... I'll call it V9M (USC Firmware).... because basically we ARE using a V9M from US Cellular since we're using their Monster Flash file...
Yes indeed, you're correct I did see V9M (US Cellular firmware) noted on the FlipGraphic.htm page, instead of FileLocs.htm.
So if the E815 is the same file structure, I am not sure how it would separate music (with genre, album art, artist, etc.) from basic sound clips on the MMC. On the phone, Ringtones & Music are comingled in the same folder? The E815 wasn't really a 'Music Phone' was it?
Motorola V710, E815
In Phone's memory....
Pictures /motorola/shared/pictures
Ringtones&Music /motorola/shared/audio
Videos /motorola/shared/video
Voice Record (sound) /VoiceDB/All/Memos
On MicroSD... (aka MMC)
Pictures /motorola/shared/pictures
Music /motorola/shared/audio
Videos /motorola/shared/
Well, you did say "BUT based on other Moto UI phones... they should be the same..." So I think the music folders are probably a bit different, based in the link you provided to pictures of the phone, the Music Player has album art, etc.
Well, you did say "BUT based on other Moto UI phones... they should be the same..." So I think the music folders are probably a bit different, based in the link you provided to pictures of the phone, the Music Player has album art, etc.
Like I said....
Originally Posted by Mark_Venture
I still need to confirm a few things, like music file location, MicroSD locations, where are sounds/voice notes saved... and what folder names do you see when using BT OBEX FTP.
yeh i never set it up on the razr2 because i new i wood be flashing soon enough so no point to waste the time. i used this on my chocolate, but with the lg we used a file, dont remember the exact name, but it something parmatable. i dont believe the motos use this file. im gonna contact humpa because its his wap so he could probably give me the info. thanks guys
just load the free session from the free wap sticky thread.
i actually have these files both savd to my computer. do i need 2 use both, or is it either or? thanks kb
also, we discussed rewriting a file to remove that warning about authorization in the browser. i did not rewrite that file because after running the browser a few times today, i have not received the warning. seems it only comes up the first time. not gonna do something that isnt necessary
I'm having a weird issue. I think it's a hardware problem, but I'm not certain. This may be just a coincidence, but since flashing to USCC, I've noticed the left external screen button (Recent Calls on USCC, Camera on VZW UI) varies in sensitivity, usually depending on what menu you're in. I've got a $5 plastic protective case on it, with a faceplate that leaves the screen exposed, allowing me access to the screen buttons. When I'm trying to use the button to activate the recent calls menu or click the check box in the music player to scan for new music, I almost always have to remove the protective faceplate, maximizing my fat finger's surface area over the button for it to work. This is never necessary for the other two buttons, but again, it also never seemed necessary when the button was used to activate the camera button on VZW UI. Also, it appears that when the button is used for other things (paging through menus, hitting back arrow in the music player), removing the faceplate is never necessary. If I leave the faceplate off completely, the button works reliably, though sometimes, I do still have to press a little harder for it to work.
I think it's probably a hardware issue, but the fact the faceplate always needs to be removed for the button to work on some menus but not others has me scratching my head - not to mention, I didn't seem to remember having any problems with it while it served as a camera button with the VZW firmware. I guess I was just wondering any of you running USCC firmware have also noticed any kind of sensitivity issues with that button. I was going to send it Motorola for service (no other warranty, AFAIK - bought it through an ebay merchant). I was able to open up an RMA, but I guess I'm worried a) they'll say the warranty is void because I'm running USCC firmware on a VZW phone, and I don't want to risk not being able to revert to USCC if I send it in with the VZW Monster on there, and b) the button will work well enough without the protective faceplate that they'll tell me it's fine. I guess I could also just live with it, but damnit, it's a new phone and I shouldn't have to.
yeh i never set it up on the razr2 because i new i wood be flashing soon enough so no point to waste the time. i used this on my chocolate, but with the lg we used a file, dont remember the exact name, but it something parmatable. i dont believe the motos use this file. im gonna contact humpa because its his wap so he could probably give me the info. thanks guys
If you used it on your chocolate... you had/have those values... On the LG you put them in the paramtable1.fil
AND you can always check those values on the chocolate's menu....
From the phone's menu, press 0, for Service Code enter 000000.
Select WAP Settings.
You'll see choices for...
Under Proxy Address Setting, the Primary and Secondary IP Address (or host name) to your proxy server example: 9.99.99.99
Port Setting... the Primary and Secondary Port to your proxy's port... example: 9201
User Name... the USER NAME for your proxy server... example: 8005551212
User Password.. the PASSWORD for your proxy server.. example: vzw
Now, take those and use them to setup a proxy in the BROWSER settings file in RSD CDMA General...
yes, i no how to do that, and thanks. my problem is that i did not make the parmatable file, i just uploaded it, so i never new the values. i sold my chocolate when i got the razr2 so i have no way of checking. is there a way 2 decode or read the parmatable file?
Originally Posted by wnrussell
Reply With Quote
Bookmarks