Page 1 of 7 1 2 3 4 5 6 7 LastLast
Results 1 to 15 of 93

Thread: UTStarcom TXT8010 / Verizon Blitz, QPST/ etc NV download fail.

  1. #1
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0

    UTStarcom TXT8010 / Verizon Blitz, QPST/ etc NV download fail.

    So I tried downloading the NV backup to QCN on my verizon blitz,
    using the software download utility, and after 80%, the phone reboots
    and only a 135KB file is created. Here is what happens:

    NV File: D:\Program Files\QPST\bin\BlitzDefault.qcn
    Status: Memory Backup Failed
    Errors: Could not Communicate in Diagnostic Mode
    Files: 80%

    However, the RF NV Manager, when I save those items as a QCN
    it is also 135KB, no error or whatever.
    Is there any way I can read the other 20% ?
    Is it not possible, or how can I have it not error?

    So confused.

  2. #2
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Ok, on build 264, it gets to 73% , with a 142-145kb file, but it doesn't view the same
    things in the NV viewer. (build 231 or 234 previously)

  3. #3
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Ok... it won't work with BitPim either tried different com-ports , rates, etc... has anyone had luck viewing this thing in any file-tree type of software? Wondering if it may just be the drivers...

    Something interesting to note... even if i don't connect, EFSExplorer auto closes, and when i do hit connect, the green light never turns on.

    Managed to download NV 0 with build 215, as later versions don't even show,
    my esn is all 0's, but prob so is my meid, assuming they aren't located in the same file... and the verizon store won't repair prepaid not activated phones. This is getting lame.
    Last edited by Guest 211; 12-09-2008 at 03:35 AM.

  4. #4
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Just got this BitPim readout using the 1.07.2 beta, from the log file, on the modem port:

    6:25:46.500 COM3: Opening port COM3, 115200 baud, timeout 3.000000, hardwareflow 0, softwareflow 0
    6:25:46.500 COM3: Open of comm port suceeded
    6:25:46.500 Other CDMA Phone: Taking phone offline
    6:25:46.515 Other CDMA Phone: Now in brew mode
    6:25:49.312 Other CDMA Phone: Listing subdirs in dir: ''
    6:25:49.312 Other CDMA Phone: X recurse=0
    6:25:49.328 Other CDMA Phone: subdir=.efs_private
    6:25:49.342 Other CDMA Phone: subdir=CGPS_ME
    6:25:49.358 Other CDMA Phone: subdir=CGPS_PE
    6:25:49.375 Other CDMA Phone: subdir=DMU
    6:25:49.375 Other CDMA Phone: subdir=FOTA
    6:25:49.390 Other CDMA Phone: subdir=MMS
    6:25:49.405 Other CDMA Phone: subdir=T9
    6:25:49.421 Other CDMA Phone: subdir=VoiceDB
    6:25:49.437 Other CDMA Phone: subdir=brew
    6:25:49.453 Other CDMA Phone: subdir=camera
    6:25:49.453 Other CDMA Phone: subdir=cert
    6:25:49.467 Failed to read filesystem
    Anyone else figure out anything? It seems to have read the subdirs just fine and then
    i'm not sure what happened... did UTstarcom / pantech make a similar cdma phone I
    can test the settings with? Also is there a way to force bitpim into brew mode?

  5. #5
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Ok, after seeing the settings other programs use, I'm currently working on a Blitz only edit of bitpim based on the dec 15th beta release so it will finally work (it sort of works now, but fails because of the most lame error checking i've ever seen out of a python script, damn brew).

    Still looking to repair my ESN / MEID (both are zeros) if anyone knows the exact offset locations it would be most helpful.

  6. #6
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Apparently PT-SURF6300-ZRF6300 (blitz) isn't supported by the QPST service programming tool.... does anyone know a work-a-round?

  7. #7
    Join Date
    Sep 2008
    Location
    PHX area
    Posts
    161
    Device(s)
    dare
    Carrier(s)
    Cricket
    Feedback Score
    0
    have you tried the the blitzpst or utstarcom pst ca I have it works
    $5 CRICKET ESN changes ,mdn changes, account refreshing, mms/wap refresh, unhotline esn, etc etc. $5 each pm me or faster call/text (480)270-1882 fast turn around

  8. #8
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Yes, however they lack certain features that QPST has.

    My main goal is to repair my esn/meid which are all 0's after i loaded the updated PRL
    file so i wouldn't have to register the phone until after I already had page plus on nam1,
    so I could put inpulse on nam2 (one nam for phone, one for the internet, etc).

  9. #9
    Join Date
    Nov 2007
    Posts
    6
    Device(s)
    txt8010 blitz
    Carrier(s)
    verizon
    Feedback Score
    0

    Blitz on bitpim

    I have got blitz to work on bitpim using chocolate 3 phone can read file system but when i try to place ringtones it says access to this directory has been blocked by phone provider i'm pretty sure it has something to do with the 16 digit diag code if anyone has it or has seen it please reply

    Also works on LG-VX9100 enV 2
    Works with most Lg for file sysem

    To bring up phone info works with Katana 1 + 2
    Says sanyo model also brings up esn and lock code

  10. #10
    Join Date
    Nov 2007
    Posts
    6
    Device(s)
    txt8010 blitz
    Carrier(s)
    verizon
    Feedback Score
    0

    TXT8010 on bitpim

    picture transferred directly to phone in file system a small step in the right direction

  11. #11
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    According to the PST, this phone has no 16 digit code.
    What folder / Settings for picture transfer, and you can do this normally from a memory card anyways...

  12. #12
    Join Date
    Nov 2007
    Posts
    6
    Device(s)
    txt8010 blitz
    Carrier(s)
    verizon
    Feedback Score
    0
    that's weird what pst did you use, maybe not looking in the right place for it maybe, it says file/folder been blocked by phone provider. It was lg vx9100 in the mmc1-my pix had to be in service mode on diagnostic port and spc was sent to the phone before hand don't know if that's why or not won't let me write in it any other way

  13. #13
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    http://www.howardforums.com/forum/sh...ad.php?t=92664

    The second link.

    I'll have to try it, so far nothing will allow you to overwrite the brew folders, etc.

    By the way, from what you typed above, you said you could see where the esn/meid was located in the file system? What phone settings / com type (modem port or diag port), and folder location did you discover them at?

    By the way, to the PST automatically puts the phone in 'service mode',
    however you can also put the phone in 'factory test mode' by typing this in
    on the phone: #46484258# and going down to "factory test" and clicking ok,
    it'll reboot into FTM.
    Last edited by Guest 211; 01-12-2009 at 08:27 PM.

  14. #14
    Join Date
    Jan 2009
    Posts
    18
    Feedback Score
    0

    Unhappy

    Borborygm: i have this same phone. mine (was) a verizon prepaid though. i entered the numbers you mentioned and now i cant dial out..it says "this phone is in offline". i was only hoping to get into the phone and add the video recording feature that is disabled because im prepay i guess. please help me get my phone working again i just bought it 2-3 days ago lol

    \m/Thor\m/

  15. #15
    Join Date
    Jan 2008
    Posts
    210
    Feedback Score
    0
    Oh, just redo the same thing(code), or restart it after taking out the battery.

    Oh, and soooo sick, the QPST service programming tool works
    with the blitz in version 2.7 build 301 as it supports that
    late of a chipset
    Last edited by Guest 211; 01-13-2009 at 03:14 AM.

Page 1 of 7 1 2 3 4 5 6 7 LastLast

Bookmarks