WARNING - Taking apart your cellular device WILL void your warranty and any insurance policies you may have. Neither myself nor LG-DARE.COM are responsible for any damage incurred before, during, and after the execution of this tutorial. If you have a problem with your device, i'd advise first to have a qualified VZW technician examine the phone to determine if there is a possible solution to your problem. Please proceed with caution.
6 piece precision screw driver set (phillips head, .1" blade = big blade, .04" blade = small blade)
Soft cloth (preferably microfiber)
- [li]Place your phone face down on the soft cloth. Remove the battery by pushing down on the release button located at the bottom.[/li]
[li]Using your small blade screwdriver, remove the covers indicated by the 5 arrows. The 6th arrow is a screw that can be removed without removing a cover[/li]
- [li]Use your phillips screwdriver, remove the 6 screws underneath those covers very carefully as indicated by the red arrows[/li]
- [li]Open up your phone. At the top of the inside screen, use the small blade screwdriver to remove the four covers found in the corners of the screen, as indicated by the red arrows. Be careful not to scratch your screen, not much force is necessary. Underneath those covers are screws. Use your phillips screwdriver to remove these carefully[/li]
Note: You should have 10 small screws by now. Be sure to store them in a safe place so that you will not lose them