Sprint Treo pro (850) on Pageplus (need help with data setup)

[cheetah9026]

I recently got my treo pro working with pageplus with the following steps:

copy pageplus EDVO.prl file onto microflash memory card
put memory card into phone
press send enter ##775# (##prl#)
enter six digit unlock code that I got from sprint when I activated my phone
select update prl
select menu -> edit
browse for .prl located on memory card

voice and sms works however the web browser can not connect and *22890 will not program my phone

I have modified Power Vision settings found in connections in connections tab under settings from start menu as follows
number to be dialed: #777
username: (myphonenumber)@vzw3g.com
password: vzw

I did not specify a domain or any ip address and thinking this could be causing the trouble. I'd appreciate any help that could shine some light on this problem.

[cheetah9026]

I did get *22890 to program the phone after doing the following steps:
download CDMA workshop
download qualcomm diagnositc drivers
connect phone to computer running xp via usb (vista may work)
press send ##3424# (##diag#) then directed xp to folder containing drivers
open CDMA workshop, selected com5, connect
went to security tab and typed in unlock code then clicked spc - read
typed in 000000 then clicked spc - write
pulled battery out of phone and put in back in

dialed *228 then dialed 1 to program phone and 2 to update prl
phone did both successfully when the spc or unlock code was changed to 000000 however I cannot pull up a webpage in internet explore via pageplus with the following settings:

number to be dialed: #777
username: (myphonenumber)@vzw3g.com
password: vzw

or

number to be dialed: #777
username:
password:

[cheetah9026]

For everyone who is in the same boat as I was:

copy dcd Verizon Carrier 20081031.cab to phone and run it

send ##778# for EPST settings

MIP Profile
Number of profiles: 6
Active user profile index: 0
MIP_MODE: Mobile IP Prefered
MIP Reg Retries: 2
MIP Reg Retry: 1750 ms
MIP Pre-Reg Timeout: 0
Mobile Node-HA: Enable
Send A Reg: Disable
Dormant Handoff Opt: Enable

MIP Default Profile
Enable Profile: Enable
NAI: mynumber@vzw3g.com (MDN@vzw3g.com)
DUN NAI: MDN@vzw3g.com so you can tether without a tethering package or

MDN@dun.vzw3g.com if you want paid tethering
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling: Enable
Home Address: 0.0.0.0
HA Shared Secret: should be garbled characters (clear these fields)
AAA Shared Secret: should be garbled characters (clear these fields)
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Pub Key: 10
MN Authenticator: 0

Security
HDR AN AUTH User Id = MDN@vzw3g.com
PPP USER ID = MDN@vzw3g.com

Run QPST -> EFS Explorer
copy 10.key to DMU folder

open Internet Explorer and enjoy!

[ET_Fone_Home]

cheetah9026, I will be going through the same setup process shortly. Thank you for posting your helpful results, I will do the same.

[nofxdan]

Thanks for taking the time to share.

[flyer123]

does any one have a link where I can download qualcomm diagnositc drivers
thanks for any help

[wingnutc141a]

does any one have a link where I can download qualcomm diagnositc drivers
thanks for any help

Sure, Here's a Qualcomm Drivers Link :

http://download.driverguide.com/driv.../d1767099.html

On My Win XP Laptop : Drivers came up in Device manager After I entered ##3424# Which put's My Palm Treo
Pro In diagnostic Mode if that helps ..........

Here's a link to the latest Qualcomm QPST Phone Programmer I found so far :

http://www.x-drivers.com/catalog/fla...pst/12051.html

[Sedare]

im still stalled on the part that says the #777 login doesnt work. I cant connect the data. Everything else is working except pictures and internet.

[vistazifta]

i know this is really old but where do i get a 10.key from?