Please note: I am NOT the sole creator of this and credit does not go to me alone for creating this solution. There was a large number of contributers along the way that all played a part in getting this up and going.
Special thanks and credit should go to
gijoey1980
Tracphonejunkie
whiterabittorg
To0
Insaincain (For the nv items. You are a legend, and credit is due where credit is due)
Admin (For all sites. PERIOD)
Myself and many others.
If you were involved and I didn't mention you please let me know and I will ad your name to the list
If anyone notices a step I may have missed please let me know so I may edit the tutorial, thanks.
I do not claim responsibility if you damage your phone, proceed at your own risk.
You will need to root the phone, key here is to make sure the kernel you load supports iptables.
Open RSD Lite 4.6, Power on phone holding down the up arrow and pressing power, this will put you into bootloader mode.
Open RSD Lite 4.6
Flash the SPRecovery_ESE81.sbf file with RSD Lite.
After the phone reboots, mount the sdcard and place the Smoked Glass rom in the root of the sdcard.
Turn the phone off.
Boot into recovery by holding down "X" and pressing power.
Once in recovery, choose install, install from sdcard, install smoked glass. When you are prompted with all the options, you can choose any you like with the exception of a few listed here. Make sure you choose the stock shell, you wipe all data and apps, you wipe the cache, and you install WI-FI tethering. All the other options is up to you but those 4 have to be chosen or you will have problems later on.
Now, once install is finished, hit power to exit back to recovery main menu then select reboot.
Once the phone is completely rebooted, power it off.
Hold down “T” on the keypad and power on phone.
Plug into computer and open HW Virtual Serial Port
In HWVS set the IP address to 192.168.16.2 and the port to 11008, choose the com port you wish to use and click connect. (For this tutorial we will use COM3)
Open CDMA WS 3.5 and connect to COM3.
On security tab send SPC 000000.
Go to tab labeled “Other” and write prl. For Cricket, 38515 is recommended.
Go to NAM and enter MIN and MDN and click write.
Goto “Memory” tab and click write under NV items, find the downloaded NV items and select them. (Thanks again to insanecain)
It should then say, 5 NV items were successfully written to phone.
On this tab do not change to simple ip, you must leave it on Mobile IP + Simple IP.
Go to Main tab and click mode reset.
You can now close HWVS and CDMA WS and open cmd.exe on your computer.
Once phone reboots go to the market using WI-FI and download and install Autostart.exe.
Open the Voice Dialer on the phone and say “Open APNs” and click open.
Click on the Verizon and edit everything to match below:
Name - Cricket
APN internet
Proxy wap.mycricket.com
Port 8080
Username yourphonenumber@mycricket.com
Password cricket
Server wap.mycricket.com
MMSC http://mms.mycricket.com/servlets/mms
MMS Proxy wap.mycricket.com
MMS Port 8080
MCC 310
MNC 004
Authentication Type PAP or CHAP
APN type <Not set>
Now click the menu button and click Save.
Before starting the next step make sure you have the u2nl file in your this folder c:/android/tools and also that you have you autostart.sh file in this folder c:/android/tools.
Now go to command prompt and type the following commands,
cd c:\android\tools
adb shell
mkdir /data/opt/
exit
adb remount
adb push c:\android\tools\u2nl /system/bin/u2nl
adb push c:\android\tools\autostart.sh /data/opt/autostart.sh
Now:
adb shell
chmod 0755 /system/bin/u2nl
chmod 0755 /data/opt/autostart.sh
reboot
Now, once your phone has rebooted, you should have working web, mms, app, gps, and all. If you don’t go back and check all the steps to insure you did everything exactly right.
It was confirmed that WS 2.7 worked in the previous thread. The NV items for 2.7 that white rabbit generates were first confirmed to work by me. You can also use QPST to confirm that the NV items stuck and write a PRL. That is all that needs to be done with QPST. For those that think they need to add a password in the QPST MIP & PPP tabs you don't. It's not needed. Also I noticed that you didn't link to the whiterabbit site, why? I know there must be a reason...
edited 7/24/2010
Last edited by whitey10tc; 07-25-2010 at 12:14 AM.
I would just like to say thank you to all the hardwork put into this awesome solution. Special thanks to SyZTYm GiJoey To0 and 'specially insance cain...you guys are all so helpful and deserve the credit for so many solutions.
Working on custom rom and .sbf to make this real easy, make take a while thou.
No I will not teach you or tell you how to flash a phone.
Yes I will help you if you educate yourself first then ask reasonable questions.
Nothing in life is free so don't expect to get all the answers for free.
Motorola Droid Full Solution Updated
Reply With Quote
Originally Posted by johnlena
Bookmarks