Motorola Droid X2 flashed to metropcs... got a problem...

[metromajik]

OK here goes...
Got a Droid X2 and flashed it into metro
i used hw serial to create a port then used cdma workshop and provisioned my data and nam settings... I used the 02004.prl for this device and rebooted it and tried to make a call but call just fails... ok well i thought maybe the PRL might be corrupt so itried a couple others (02003.prl, 02001.prl, 01004.prl...etc). Still nothing...

Thought maybe I could flash a custom rom to see if that could make a difference...

Rooted the phone with Gingerbreak.apk
flashed a recovery to the device and flash MinimalX Rom to the device...
double checked my Nam and Data and still calls fail...

what am i doing wrong here. Is the frequency different on the X2
is there possibley a radio patch i can use???
any ideas??? the help is much appreciated.

[metromajik]

issue resolved

[mattcarpenter]

I actually have a Motorola droid 3, and I had the EXACT same problem... I connected via HW SERIAL and used CDMAWS to flash the nv items and uploaded the 03022 prl for blazing internet speeds...

For 5 minutes, I had 3G internet and incoming and outgoing picture messaging... Then, ALL OF A SUDDEN, THE 3G disappeared... WTH? It shows FULL signal bars, but the calls don't go through... I try to make a call and it just hangs for about 50 seconds, and then just call fails... I can't even dial 911..

Then every once in a blue moon, a call will connect..

So finally, I had to run an SBF bat, and restore it to normal... I did the *22804 activation and got it on Metro PCS again.. So I doubt it's the prl.. cause I reconnected, and installed 3022 prl, and it worked perfectly fine.. So I concluded, it can't be CDMAWS either...

So then it MUST BE the NV Items, right?? The NV Items I had were for the droid 1... could it be that those aren't compatible with the droid 3? Please help.. I don't want a droid 3 with only talk and text..

[metromajik]

use d2g nv items

[mattcarpenter]

Do you know possibly where I could find these Metro PCS NV Items for the Droid 2 Global? If you have them, I would greatly appreciate it..

carpenter.mathew@gmail.com

[metromajik]

email sent

[giarc1]

you got everything to work? i had some supposed "cell expert" tell me it was IMPOSSIBLE! kind of a noob here, but could you please post a link, or tutorial for this? thanks!

[xjohnnyskax]

email sent

Meromajik,can you email me those nv items too.I might need them for future flashing.Thank you.

xjohnnyskax@yahoo.com

[Perry.Saints]

How did you resolve the issue? I'm about to attempt to flash a DX2 over to metro pcs also. Any info or links would be helpful as I am having difficulty finding info on this process. I have qpst experience + the software on my computer as well thee other required software. Where douglass be s good reliable guide?

[xjohnnyskax]

Find a guide for the Droid X and follow that.Only difference is the way you put it on diagnostic mode i believe.

[Perry.Saints]

Find a guide for the Droid X and follow that.Only difference is the way you put it on diagnostic mode i believe.

thanks I appreciate it. Btw I hate to sound redundant ,but I too can't find the NV items for D2g; can someone please email me a copy as well?

I'm new so I can't post my email directly so I hope you can fill in the blanks


perry.saints.ps
gmail.com