This is how i flashed the Thunderbolt to Cricket. Not sure if there is another thread of this but if there is mods delete this, if not you have permission to edit this Thread to make it more clean. First thread for me.
-Lovehatehero123
aka
Oriax123 in other Forums
Cdma workshop 2.7 will work but if you have 3.5 or later is better.
Qpst DOES work if you dont read from the phone. Just write.
Codes i know:
##778# send
##PROGRAM# send
##DIAG# send for Diag mode i use "GScript" because it doesnt require you to reboot your phone everytime.
##3242#send
You can use Greenk45 with this, tried Apnbackup but doesnt seem to help much.
PRL:*228 will not work for the Thunderbolt. (at least for me)
1.connect the phone to cdma workshop but do not read (used gscript for diag mode, itll only show the cdma port)
2.Send Spc code to the Phone.
3.go to the "Other" tab and navigate to "R-UIM" and click read.
4.Change it to "NV Only" and write to phone. It should say Successful
5.Now you can pick the Prl you want to use and write it.
Reboot.
I usually reboot using adb commands but i made a GUI program for all my rooting,cricket data,reboot and recovery needs.
Now you all already know how to write everything else to the phone,
User:MDN@mycricket.com
Pass:cricket
MIP
UM
AN
and so on and so forth.
*If you cant get QPST to work or dont have CDMA workshop 35. or later you can just do ##PROGRAM# and edit from the phone itself.
Also do a ##778# send then to Modem settings.
Go down and pick “Rev A“
choose enable , hit the menu button and then “Commit Modifications.”
and reboot.
dial *#*#4636#*#* go to phone info, then set preferred network type to CDMA auto (PRL) ---will stop phone from looking for LTE signal
Hit thanks if i helped.
Why pay for something when you can do it for free?![]()



Htc Thunderbolt 4G Flashing To Cricket


Reply With Quote



Bookmarks