Results 1 to 3 of 3

Thread: Android Easy Backtrack 5 and Ubuntu install (Tested with Samsung Galaxy S3)

  1. #1
    Join Date
    Feb 2011
    Location
    Akron
    Posts
    149
    Carrier
    Revol (Flashed myself)
    Feedback Score
    0

    Android Easy Backtrack 5 and Ubuntu install (Tested with Samsung Galaxy S3)



    So, I downloaded backtrack for android and had a lot of issues trying to get it to work on the Samsung Galaxy S3 (l710).
    I compiled a img of Backtrack 5 for android. Made easy for installing and setup for a android device.


    BT5 Torrent Zip:

    Allinone torrent Download (torrent): http://z4cellforums.webs.com/apps/fo...ck-5-made-easy

    _____________________________________

    Includes (zip):
    _____________________________________

    Backtrack IMG (ALREADY HAS msfupdate UPDATED)
    Config files
    Android Vnc Viewer APP
    Terminal Emulator APP
    Busybox app
    Complete Linux Installer
    Now, I'm making it easy to just unzip, copy and run.
    No rar files
    No special unzipping software. Unless you use a basic file manager.


    What you need:

    *Rooted Galaxy S3
    *The torrent file above (BT5 Torrent Zip)
    *Loop Device
    (I would use a CM10 Kernel, I used Liquid Smooth mr1 rom. *Which I will add a link below for liquid. So mostly anything CM10)

    _____________________________________

    Quick install guide:
    _____________________________________

    Gain root:

    Download my ALLinone torrent:

    Allinone torrent Download (torrent): ALLinone torrent Download HERE

    *Unzip and install
    *Samsung galaxy s3 toolkit
    *Install drivers
    *Turn on debug and unknown sources in settings
    *Run the toolkit and follow what it tells your and gain root.
    *Don't forget to install recovery.
    (Not gonna go into much detail about it...)

    _____________________________________

    Liquid Smooth (l710 only):
    http://goo.im/devs/liquidsmooth/d2sp...-RC1-d2spr.zip
    Gapps:
    http://androidjinn.com/download-late...ogle-apps.html

    _____________________________________

    * Place both zip file on your rooted s3 sdcard.
    * Wipe all and install liquid then gapps.
    * Reboot
    (Not going into detail anymore then that.)

    If you have root and a CM10 rom, just skip the steps above.



    _____________________________________

    Installing and running BACKTRACK 5 for Galaxy S3:
    _____________________________________

    1) Download the torrent above.
    2) Unzip BT5 Torrent Zip.
    3) Place the BT5 folder on the root of your extsdcard.
    (Could not get it to work on the internal SDcard.)
    4)Place on sdcard and Install:
    * VNC Viewer (To view BACKTRACK)
    * Terminal Emulator (To Start Backtrack)
    * Busybox installer (Just needed)
    * Complete Linux Installer (To auto type the commands in Terminal Emulator)

    5) Once you have everything installed, copied, rooted, and flashed, you should be ready for the next steps.
    6) Open VNC Viewer (androidVNC) and fill in the following info:


    * Nickname: root
    * Password: backtrac (not backtrack or toor or toortoor)
    * Address: localhost
    * Port: 5900
    * Username: LEAVE BLANK
    * Color Format: 24-bit color (4 bpp)
    * Check Local Mouse Pointer
    * Force full-screen bitmap: auto

    7) Now that's all set up, hit home and open Complete Linux installer.
    Click Launch on the side bar.

    9) Change Ubuntu to Backtrack.
    10) Click setting, and edit.

    11) Find your Backtrack img and click save changes.
    12) Go back and click Start Linux. (Terminal will open)
    Should look like this
    (You may have to input the resolution. which you just type 1280x720 then enter):


    13)Finally if everything is setup right. Just click home leaving Terminal open, RUN VNC Viewer. Just click connect.
    WELCOME TO BACKTRACK 5.


    _____________________________________


    NOTE: If you want internet, just make sure you are connected before you run Complete Linux Installer.



    So recap....
    If you have root, and a CM10 kernel or loop.
    Just skip down to (((Installing and running BACKTRACK 5 for Galaxy S3)))


    To run each time just:
    Open Linux installer and Launch it.
    Open Vnc viewer and connect.
    Enjoy. (This should work with other devices)

    To gain root:
    Open Terminal in backtrack.
    Type:
    sudo su (enter)
    password: backtrac (enter) Now your in root. You need to have this to install anything like aircrack or run aircrack.
    I will be posting up a new copy of the Backtrack 5 IMG when I can with new tools and updates.
    _____________________________________




    Ubuntu setup:

    Same basics as backtrack

    1) Download and unzip
    2) Copy Ubuntu folder to extsdcard
    3) Open linux installer and find and start ubuntu
    4) vnc veiwer:
    * Nickname: (blank)
    * Password: ubuntu
    * Address: localhost
    * Port: 5900
    * Username: LEAVE BLANK
    * Color Format: 24-bit color (4 bpp)
    * Check Local Mouse Pointer
    * Force full-screen bitmap: auto

    Connect and done.

    Ubuntu android pack here:
    http://z4cellforums.webs.com/apps/fo...tu-12-04?next=

  2. #2
    Join Date
    Feb 2011
    Location
    Akron
    Posts
    149
    Carrier
    Revol (Flashed myself)
    Feedback Score
    0

    Click here to enlarge image

    Ubuntu 12.04 v2 (Torrent):
    http://z4cellforums.webs.com/apps/fo...tu-12-04?next=

    _______________
    Change logs:
    _______________


    Added:<BR>
    QBittorrent
    Aircrack-ng
    Wicd (When booted ignore errors. Just needed to get airmon-ng to find the wireless card)
    build-essential
    libssl-dev
    Reaver 1.4 (wps cracker)
    libpcap-dev
    sqlite3
    libsqlite3-dev
    libpcap0.8-dev
    Subversion


    I still cant get the 'Galaxy S3 into monitoring mode but this is a big step up. Note you can use this same Img and setup on other android devices. Just note you will have to get your own drivers for your own wireless cards or get a external micro usb to 5 pin female usb+wireless card.
    I will update if I come into anything.


    Quote Originally Posted by fifiknw View Post


    So, I downloaded backtrack for android and had a lot of issues trying to get it to work on the Samsung Galaxy S3 (l710).
    I compiled a img of Backtrack 5 for android. Made easy for installing and setup for a android device.


    BT5 Torrent Zip:

    Allinone torrent Download (torrent): http://z4cellforums.webs.com/apps/fo...ck-5-made-easy

    _____________________________________

    Includes (zip):
    _____________________________________

    Backtrack IMG (ALREADY HAS msfupdate UPDATED)
    Config files
    Android Vnc Viewer APP
    Terminal Emulator APP
    Busybox app
    Complete Linux Installer
    Now, I'm making it easy to just unzip, copy and run.
    No rar files
    No special unzipping software. Unless you use a basic file manager.


    What you need:

    *Rooted Galaxy S3
    *The torrent file above (BT5 Torrent Zip)
    *Loop Device
    (I would use a CM10 Kernel, I used Liquid Smooth mr1 rom. *Which I will add a link below for liquid. So mostly anything CM10)

    _____________________________________

    Quick install guide:
    _____________________________________

    Gain root:

    Download my ALLinone torrent:

    Allinone torrent Download (torrent): ALLinone torrent Download HERE

    *Unzip and install
    *Samsung galaxy s3 toolkit
    *Install drivers
    *Turn on debug and unknown sources in settings
    *Run the toolkit and follow what it tells your and gain root.
    *Don't forget to install recovery.
    (Not gonna go into much detail about it...)

    _____________________________________

    Liquid Smooth (l710 only):
    http://goo.im/devs/liquidsmooth/d2sp...-RC1-d2spr.zip
    Gapps:
    http://androidjinn.com/download-late...ogle-apps.html

    _____________________________________

    * Place both zip file on your rooted s3 sdcard.
    * Wipe all and install liquid then gapps.
    * Reboot
    (Not going into detail anymore then that.)

    If you have root and a CM10 rom, just skip the steps above.



    _____________________________________

    Installing and running BACKTRACK 5 for Galaxy S3:
    _____________________________________

    1) Download the torrent above.
    2) Unzip BT5 Torrent Zip.
    3) Place the BT5 folder on the root of your extsdcard.
    (Could not get it to work on the internal SDcard.)
    4)Place on sdcard and Install:
    * VNC Viewer (To view BACKTRACK)
    * Terminal Emulator (To Start Backtrack)
    * Busybox installer (Just needed)
    * Complete Linux Installer (To auto type the commands in Terminal Emulator)

    5) Once you have everything installed, copied, rooted, and flashed, you should be ready for the next steps.
    6) Open VNC Viewer (androidVNC) and fill in the following info:


    * Nickname: root
    * Password: backtrac (not backtrack or toor or toortoor)
    * Address: localhost
    * Port: 5900
    * Username: LEAVE BLANK
    * Color Format: 24-bit color (4 bpp)
    * Check Local Mouse Pointer
    * Force full-screen bitmap: auto

    7) Now that's all set up, hit home and open Complete Linux installer.
    Click Launch on the side bar.

    9) Change Ubuntu to Backtrack.
    10) Click setting, and edit.

    11) Find your Backtrack img and click save changes.
    12) Go back and click Start Linux. (Terminal will open)
    Should look like this
    (You may have to input the resolution. which you just type 1280x720 then enter):


    13)Finally if everything is setup right. Just click home leaving Terminal open, RUN VNC Viewer. Just click connect.
    WELCOME TO BACKTRACK 5.


    _____________________________________


    NOTE: If you want internet, just make sure you are connected before you run Complete Linux Installer.



    So recap....
    If you have root, and a CM10 kernel or loop.
    Just skip down to (((Installing and running BACKTRACK 5 for Galaxy S3)))


    To run each time just:
    Open Linux installer and Launch it.
    Open Vnc viewer and connect.
    Enjoy. (This should work with other devices)

    To gain root:
    Open Terminal in backtrack.
    Type:
    sudo su (enter)
    password: backtrac (enter) Now your in root. You need to have this to install anything like aircrack or run aircrack.
    I will be posting up a new copy of the Backtrack 5 IMG when I can with new tools and updates.
    _____________________________________




    Ubuntu setup:

    Same basics as backtrack

    1) Download and unzip
    2) Copy Ubuntu folder to extsdcard
    3) Open linux installer and find and start ubuntu
    4) vnc veiwer:
    * Nickname: (blank)
    * Password: ubuntu
    * Address: localhost
    * Port: 5900
    * Username: LEAVE BLANK
    * Color Format: 24-bit color (4 bpp)
    * Check Local Mouse Pointer
    * Force full-screen bitmap: auto

    Connect and done.

    Ubuntu android pack here:
    http://z4cellforums.webs.com/apps/fo...tu-12-04?next=

  3. #3
    Join Date
    Feb 2011
    Location
    Akron
    Posts
    149
    Carrier
    Revol (Flashed myself)
    Feedback Score
    0



    Ubuntu 12.04 V3: http://z4cellforums.webs.com/apps/fo...tu-12-04?next=

    _______________
    Change logs:
    _______________

    Gedit
    mtpfs
    libusb
    yum
    tcpdump
    Added backtrack repo
    libmtp-dev
    metasploit (NOT TESTED and not fully working)
    S.E.T. (NOT TESTED and not fully working)


    There are still some bugs and missing programs for set and metasploit.
    I will be working it.

    ______________________________________



    Quote Originally Posted by fifiknw View Post


    So, I downloaded backtrack for android and had a lot of issues trying to get it to work on the Samsung Galaxy S3 (l710).
    I compiled a img of Backtrack 5 for android. Made easy for installing and setup for a android device.


    BT5 Torrent Zip:

    Allinone torrent Download (torrent): http://z4cellforums.webs.com/apps/fo...ck-5-made-easy

    _____________________________________

    Includes (zip):
    _____________________________________

    Backtrack IMG (ALREADY HAS msfupdate UPDATED)
    Config files
    Android Vnc Viewer APP
    Terminal Emulator APP
    Busybox app
    Complete Linux Installer
    Now, I'm making it easy to just unzip, copy and run.
    No rar files
    No special unzipping software. Unless you use a basic file manager.


    What you need:

    *Rooted Galaxy S3
    *The torrent file above (BT5 Torrent Zip)
    *Loop Device
    (I would use a CM10 Kernel, I used Liquid Smooth mr1 rom. *Which I will add a link below for liquid. So mostly anything CM10)

    _____________________________________

    Quick install guide:
    _____________________________________

    Gain root:

    Download my ALLinone torrent:

    Allinone torrent Download (torrent): ALLinone torrent Download HERE

    *Unzip and install
    *Samsung galaxy s3 toolkit
    *Install drivers
    *Turn on debug and unknown sources in settings
    *Run the toolkit and follow what it tells your and gain root.
    *Don't forget to install recovery.
    (Not gonna go into much detail about it...)

    _____________________________________

    Liquid Smooth (l710 only):
    http://goo.im/devs/liquidsmooth/d2sp...-RC1-d2spr.zip
    Gapps:
    http://androidjinn.com/download-late...ogle-apps.html

    _____________________________________

    * Place both zip file on your rooted s3 sdcard.
    * Wipe all and install liquid then gapps.
    * Reboot
    (Not going into detail anymore then that.)

    If you have root and a CM10 rom, just skip the steps above.



    _____________________________________

    Installing and running BACKTRACK 5 for Galaxy S3:
    _____________________________________

    1) Download the torrent above.
    2) Unzip BT5 Torrent Zip.
    3) Place the BT5 folder on the root of your extsdcard.
    (Could not get it to work on the internal SDcard.)
    4)Place on sdcard and Install:
    * VNC Viewer (To view BACKTRACK)
    * Terminal Emulator (To Start Backtrack)
    * Busybox installer (Just needed)
    * Complete Linux Installer (To auto type the commands in Terminal Emulator)

    5) Once you have everything installed, copied, rooted, and flashed, you should be ready for the next steps.
    6) Open VNC Viewer (androidVNC) and fill in the following info:


    * Nickname: root
    * Password: backtrac (not backtrack or toor or toortoor)
    * Address: localhost
    * Port: 5900
    * Username: LEAVE BLANK
    * Color Format: 24-bit color (4 bpp)
    * Check Local Mouse Pointer
    * Force full-screen bitmap: auto

    7) Now that's all set up, hit home and open Complete Linux installer.
    Click Launch on the side bar.

    9) Change Ubuntu to Backtrack.
    10) Click setting, and edit.

    11) Find your Backtrack img and click save changes.
    12) Go back and click Start Linux. (Terminal will open)
    Should look like this
    (You may have to input the resolution. which you just type 1280x720 then enter):


    13)Finally if everything is setup right. Just click home leaving Terminal open, RUN VNC Viewer. Just click connect.
    WELCOME TO BACKTRACK 5.


    _____________________________________


    NOTE: If you want internet, just make sure you are connected before you run Complete Linux Installer.



    So recap....
    If you have root, and a CM10 kernel or loop.
    Just skip down to (((Installing and running BACKTRACK 5 for Galaxy S3)))


    To run each time just:
    Open Linux installer and Launch it.
    Open Vnc viewer and connect.
    Enjoy. (This should work with other devices)

    To gain root:
    Open Terminal in backtrack.
    Type:
    sudo su (enter)
    password: backtrac (enter) Now your in root. You need to have this to install anything like aircrack or run aircrack.
    I will be posting up a new copy of the Backtrack 5 IMG when I can with new tools and updates.
    _____________________________________




    Ubuntu setup:

    Same basics as backtrack

    1) Download and unzip
    2) Copy Ubuntu folder to extsdcard
    3) Open linux installer and find and start ubuntu
    4) vnc veiwer:
    * Nickname: (blank)
    * Password: ubuntu
    * Address: localhost
    * Port: 5900
    * Username: LEAVE BLANK
    * Color Format: 24-bit color (4 bpp)
    * Check Local Mouse Pointer
    * Force full-screen bitmap: auto

    Connect and done.

    Ubuntu android pack here:
    http://z4cellforums.webs.com/apps/fo...tu-12-04?next=

Similar Threads

  1. Replies: 0
    Last Post: 11-24-2012, 10:36 AM
  2. Replies: 3
    Last Post: 07-09-2012, 05:08 PM
  3. Replies: 3
    Last Post: 03-27-2008, 02:39 AM
  4. Replies: 2
    Last Post: 09-19-2005, 08:13 AM
  5. How to transfer Ringtones and Wallpaper from PC with Samsung A650
    By crazyitalian in forum Windows Phone/Mobile
    Replies: 2
    Last Post: 09-19-2005, 08:13 AM

Tags for this Thread

Bookmarks