Thanks to RyoS for posting this in the UIQ forum. I have edited the thread to make it easier to read and thought this would be a good addition to the Cingular forum.
The original thread can be seen here
Setting Up GPRS Internet Access + WAP + MMS with Cingular Wireless on Sony Ericsson P800/P900
==================================================
01) Go to Control Panel
02) Click on the "Connections" tab
03) Click on "Internet Accounts" and make sure you are under the "New" tab
04) Click on "New."
05) Enter any name for your new account, for example "Cingular WAP."
06) Under "Connection Type", choose "GPRS"
07) Click on Advanced and under the "Server" tab, do the following:
- a) Check the box that says "Username and password required:"
- b) Enter the following information...
Username: WAP@CINGULARGPRS.COM (All Capital letters)
Password: CINGULAR1 (All Capital letters)
Address: wap.cingular (All small letters)
08) Click on the "Log In" tab and make sure that:
- a) The "Get IP address automatically" box is CHECKED.
- b) The "Get DNS address automatically" box is CHECKED.
09) Click on the "Proxy" tab and make sure that:
- a) The "Use Proxy Server" box is UN-CHECKED
10) Click on the "Other" tab and make sure that:
- a) The box "Enable PPP extenstions" is CHECKED.
- b) Under the "Authentication" drop-down menu, choose "Secure."
11) Click on the QoS and make sure that:
- a) The "Header compression" box is UN-CHECKED.
- b) "Precedence" is set to "Subscribed."
- c) "Delay" is set to "Subscribed."
- d) "Reliability" is set to "Class 3."
- e) "Peak rate" is set to "Subscribed."
- f) "Mean rate" is set to "Subscribed."
12) Click "Done" twice to go back to the "Internet Accounts" window.
13) Click on the "Other" tab:
- Set "Dialup timeout" to "Never"
- Set "GPRS timeout" to "Never"
- Set "Preferred mode" to "Automatic"
14) Then click "Done" once to go back to the "Control Panel" window.
15) Make sure you are under the "Connections" tab.
16) Click on "Messaging Accounts."
17) Click the "MMS" tab.
18) Under "Service Center Address" type "mmsc.cingular.com" (All lower case).
19) Set "WAP account" to "Cingular WAP" (which we created in the above steps).
20) Make Sure that "Automatic" is set to "On."
21) You can set "Download size" to "No restriction" if you want (optional).
22) Click on "Advanced."
23) Under the "Send" tab, make sure that:
- a) "Validity period" is set to "Maximum."
- b) "Priority" is set to "Normal."
- c) "Conformance" is set to "Normal."
- d) The "Hide number" box is UN-CHECKED.
- e) The "Read report" box is UN-CHECKED.
- f) The "Delivery report" box is UN-CHECKED.
- g) The "Reply with history" box is UN-CHECKED.
24) Click on the "Receive" tab and make sure that:
- a) The "Allow delivery notification" box is CHECKED.
- b) The "Allow read notification" box is CHECKED.
- c) The "Advertisements" box is UN-CHECKED.
- d) The "Information" box is UN-CHECKED.
- e) The "Anonymous senders" box is UN-CHECKED.
25) Click "Done" twice to go back to the "Control Panel" window.
26) Make sure you are under the "Connections" tab.
27) Click on "WAP Accounts" and make sure you are under the "Basic" tab.
28) Click "New."
29) Enter the following information:
- a) Account Name "Main WAP Account"
- b) Set "Internet account" to "Cingular WAP."
- c) Make sure the "Use Proxy" box is CHECKED.
- d) Enter the following:
Address: 66.209.11.61
Port: 9201
Username: WAP@CINGULARGPRS.COM (All upper case)
Password: CINGULAR1 (All upper case)
30) Click "Done" to go back to the "WAP accounts" window.
31) Click on the "Preferred" tab.
32) Make sure that the "Use WAP account" is UN-CHECKED (optional, I prefer it).
33) Click "Done" and Congratulations you really are DONE !!!
Reply With Quote
Bookmarks