Early Christmas Gift

Well here it is finaly for all you V3c/V3m hackers that have been waiting so long for this Telus firmware. It's not the newer 06.08.00R but it's better than nothing. Telus File System backup also included for the java system files. Tested by me and fully working but don't flash from a Verizon V3c/V3m firmware. Go from Alltel, Generic, MPC, Vivo anything but Verizon. My 275a MIP unlock edit works on secondary profile only not the primary.
Enjoy

Note: V3m will still lose transflash capability


TLS_V3c_06.04.00R_PRIhh70382_CUSTOMER_UPGRADE_01

http://rapidshare.com/files/7621418...hx.zip.zip.html

thank you but when i flash with pst i get this error:

calculated superfile checksum does not match checksum in last s7 record

You are the man. Thanks a bunch.

Real quick tho, I'm guessing we should follow the k1m Telus guide Mark_V has on his site. Or is there something different we need to do.

Ya same thing except you need to make a seconday MIP profile with QPST for the 275a hack to stick

Coolio, thx for the info bud.

I thought I would never see the day this happened! Looks like I may end up getting a new battery for my V3c and hanging on to it for a while.

Thanks GoldMembr!

EDIT: I assume going to this from the Bell firmware would not be wise? Any opinions on what the best "springboard" firmware would be?

Martian21

Going to this flash from Bell is fine and you won't have to do the java fixes.

Are there any significant differences between Bell and Telus firmwares?

Many like Bluetooth OPP, Verizon Web, Dial Up Networking just to name a few

Here is my 2742 and 275a seems from my Telus V3c because this upgrade flash doesn't update those 2 seems so you need to upload mine with P2KSeem. They have every edit done that needs to be done including the MIP unlock edit.


Seem 2742 Bytes 0000 Record 0001
Seem 275a Bytes 02d0 Record 0001

http://rapidshare.com/files/76356776/seems.rar.html

i flashed with this got it to work, i had the generic flash prior (dt) still java didnt show and still had DT settings. so i flashed to alltel monster then this telus flash still its brew not java. any suggestions?

I told you you have to upload my 2 seems and the java files for the filesystem for java to work. Upload my 2 seems with P2KSeem first. Do the 2742 first then 275a then open the filesystem dump included with the flash and use P2KCommander to upload every thing in "brew/mod/jeodek" and "motorola/shared/jeodek" to the same place on your phone. Then java will be working.

Here is my mma_ucp and mma_dcp instead of using the Telus ones for the filesystem dump. The Telus ones have to much extra junk. Mine say Java for Java and Webaccess Browser and WebSessions.

http://rapidshare.com/files/7640907...cp_dcp.rar.html

thank you i did not notice your buttom add on. yes i got everything working what is this mip profile 2 you mention? what would it allow us to do?

Get EVDO data working. If you don't do it only 1X will work and you will have to reset the 1XRTT Settings every time you restart the phone.

Can you please explain what we have to do to create that MIP 2 file....thanks

Not to get off topic, but curious on your opinion Goldmembr before I spend the time flashing my v3c

I've got a v3c flashed currently with the Alltel 4.04 customer upgrade on it from ages ago, and it's fully working. Being I have my v9m flashed to USCC which flash in your opinion would be better to go with for functioning and ease of getting everything to work. Obviously we have 2 choices this one or the Bell, I'm just kinda curious as to your opinion between the 2 seeing as I've not had any of my phones flashed to date that would have Java in the end, and by the looks of it you are using both setpus on your different phones.