V3C Premade 2742 Seem???

[spence2028]

Does anyone have a seem with all the main features unlocked... kind of like the ones Mark has for the v710 and e815 at the bottom of this page
http://www.v710.org/mark/V710_SeemEdit.htm

[Mark_Venture]

I don't have a V3C, and no one has sent me one yet...

Btw, its not too difficult to do the edits yourself... The guide on my seem edit page is not that difficult to do...

Is there a reason you want someone elses? It would only save you about 5min or less... and, depending on who edited it.. you might not know exactly what edits were done... Doing it your self, you can be sure exactly what changes were made...

[GoldMembr]

Here you go this is for the Verizon firmware V3c and Mark you can add this one to your pages if you want to. List of seems edited below.

http://rapidshare.de/files/18711705/2742_0001.rar.html


Seem 2742 Bytes 90 Record 0001

Offset 003f, bit 6 - on, Enables Call Barring Settings > Security > Restrict Calls > Outgoing Calls
Offset 007d, bit 5 - on, Changes backlight times to 20, 40, 60, seconds
Offset 000a, bit 7 - on, Enables Settings > Initial Setup > Backlight > Continuous - Dims Backlight instead of shutting off
Offset 007b, bit 3 - off and bit 4 - on, Gives you Vib+Ring option
Offset 007b, bit 2 - off and bit 7 – on, Gives you Moto ring control (instead of low thru high, you get 1 thru 7)
Offset 006a, bit 3 - on, Enables the Menu: Security > Data Connection - it has the 1XRTT Settings and Service Type
Offset 006a, bit 0 - on, Allows Bluetooth or USB file transfer in MPT(Sometimes OBEX)
Offset 000c, bit 1 - on, Enables scroll missed calls when flip closed
Offset 0006, bit 1 - on, Enables "Siren" Alert
Offset 0038, bit 1 - on, Enables "Continental" Alert
Offset 0038, bit 2 - on, Enables "Classic" Alert
Offset 0038, bit 3 - on, Enables "Attention" Alert
Offset 003b, bit 0 - on, Enables "Moonlit Haze" Alert

[jsrunnels]

It would be great for this to go on the Wiki as well. Of all the things I have done to my phone, seem editing makes me the most nervous.

I don't really understand what I am doing; it doesn't seem like any change is taking place; I never quite knew if I needed to upload after each change or just each seem. etc.

I would have loved to have this predone seem!

[dhl]

The problem with the wiki now is that people are not realizing that the wiki for the Alltel should not be cluttered with stuff for the Verizon firmware. I believe seperate wikis should be started for the different firmwares. There are several seem edits that are useless for the Alltel firmware and can actually have adverse affects.

[Mark_Venture]

Here you go this is for the Verizon firmware V3c and Mark you can add this one to your pages if you want to.

Thanks I will add this afternoon, with a link to your post (just like I did with Humpa's 2742 seem)

[spence2028]

It would be great for this to go on the Wiki as well. Of all the things I have done to my phone, seem editing makes me the most nervous.

I don't really understand what I am doing; it doesn't seem like any change is taking place; I never quite knew if I needed to upload after each change or just each seem. etc.

I would have loved to have this predone seem!

This is pretty much the same reason I wanted it. Thanks so much for making it.

[galliguy]

The problem with the wiki now is that people are not realizing that the wiki for the Alltel should not be cluttered with stuff for the Verizon firmware. I believe seperate wikis should be started for the different firmwares. There are several seem edits that are useless for the Alltel firmware and can actually have adverse affects.

I totally agree... I was about to say something as well

[Mark_Venture]

It would be great for this to go on the Wiki as well. Of all the things I have done to my phone, seem editing makes me the most nervous.

how much Verizon V3C stuff is NOT on my pages yet? let me know, I'll add it.

I don't really understand what I am doing; it doesn't seem like any change is taking place; I never quite knew if I needed to upload after each change or just each seem. etc....!

You will never get any kind of feed back during the seem edit process. Even using a pre-made seem.

as for upload after each change...

From my seem edit page...

(Note: if making multiple edits to the SAME seem file, you do not have to click "save to phone" for each individual edit you make unless you want to. You can wait until after you have made all of your desired seem edits to that file and then click Save To Phone.)

[lostthrone]

Here you go this is for the Verizon firmware V3c and Mark you can add this one to your pages if you want to. List of seems edited below.

http://rapidshare.de/files/18711705/2742_0001.rar.html


Seem 2742 Bytes 90 Record 0001

Offset 003f, bit 6 - on, Enables Call Barring Settings > Security > Restrict Calls > Outgoing Calls
Offset 007d, bit 5 - on, Changes backlight times to 20, 40, 60, seconds
Offset 000a, bit 7 - on, Enables Settings > Initial Setup > Backlight > Continuous - Dims Backlight instead of shutting off
Offset 007b, bit 3 - off and bit 4 - on, Gives you Vib+Ring option
Offset 007b, bit 2 - off and bit 7 – on, Gives you Moto ring control (instead of low thru high, you get 1 thru 7)
Offset 006a, bit 3 - on, Enables the Menu: Security > Data Connection - it has the 1XRTT Settings and Service Type
Offset 006a, bit 0 - on, Allows Bluetooth or USB file transfer in MPT(Sometimes OBEX)
Offset 000c, bit 1 - on, Enables scroll missed calls when flip closed
Offset 0006, bit 1 - on, Enables "Siren" Alert
Offset 0038, bit 1 - on, Enables "Continental" Alert
Offset 0038, bit 2 - on, Enables "Classic" Alert
Offset 0038, bit 3 - on, Enables "Attention" Alert
Offset 003b, bit 0 - on, Enables "Moonlit Haze" Alert

How do you transfer it to the phone?

Thank you

[luap119]

Goto Seem 2742 Bytes 90 Record 0001 on your phone

Then load this seem file up and then save it to Seem 2742 Bytes 90 Record 0001 on your phone.. then reset the phone..

[lostthrone]

Goto Seem 2742 Bytes 90 Record 0001 on your phone

Then load this seem file up and then save it to Seem 2742 Bytes 90 Record 0001 on your phone.. then reset the phone..

Thank you

...But I need PST to run seem edit right? Where can I find this software?

[Mark_Venture]

...But I need PST to run seem edit right? Where can I find this software?

PST is a copyright software, and wares links are NOT permitted here..

instead... try getting MSU see -> Can't find PST? use this instead!

[lostthrone]

PST is a copyright software, and wares links are NOT permitted here..

instead... try getting MSU see -> Can't find PST? use this instead!

Thank you Mark,

Sorry for sending you a PM earlier, I'm a newbie here.

I'm going to try the MSU later since I'm using Bitpim right now.
One problem though, I can transfer picture using Bitpim's overwrite function but when I do the same (overwrite or add new file) for the ringtones to the /audio folder, Bitpim gives me error when transferring ringtones. But I am able to add the same ringtone (mp3 file, 30k size) to the /ringtone folder without any transferring error. The thing is after deleting MyToneDB.db and restart the phone, I still can't see the ringtone on my phone.

Do you have any idea? If not, I'll try the seem edit with MSU later.

Again, thank you for your help.

[marcusjb]

When I got my phone, it had version 02, and I had no problem transferring files with MPT or Bitpim. Unknowingly, I upgraded the firmware to 03, and I did the seem edit to open up file transfers again following the instructions on Mark's page, and Bitpim still says the phone is locked. Is there something else I need to do?